| ``-i id``: Gather statistics from named interface (ie -i eth0).
| ``-d``: Run in background (daemonise).
| ``-nsa``: Scale network graphs against highest speed recorded. The default is to scale against the highest peak in the current graph
| ``-h``: Show help.
| ``-r seconds``: Set the refresh interval to seconds. The seconds must be between 1 and 300 (ie -r 20).
| ``-u``: Display unicore graphs only on the CPU screen.
| ``-t id``: Force to monitor temperature sensor id on start (ie -t 1). The id should point to sysfs path */sys/class/hwmon/hwmon<id>/device/temp1_input*. Default the sensor id is auto-detected.
| ``-f id``: Force to monitor fan speed sensor id on start (ie -f 1). The id should point to sysfs path */sys/class/hwmon/hwmon<id>/device/fan1_input*. Default the sensor id is auto-detected.
| ``-df``: Disable monitoring CPUs frequencies.
| ``-ir``: Enable the bottom info bar content rotate cycle over all available sensors.
| ``-vc``: The cpu cores will be calculated every time (for systems with the cpu hotplug).
| ``-gt id``: Show temperature <id> in place of the maximal one on the summary screen with the option -gt <id> (ie -gt 1). The id should point to sysfs path */sys/class/hwmon/hwmon../device/temp<id>_input*.
