68 lines
2.6 KiB
ReStructuredText
68 lines
2.6 KiB
ReStructuredText
|
G15STATS
|
||
|
|
========
|
||
|
|
|
||
|
|
A CPU/Memory/Swap/Network/Battery/Temperature/Fan Speed/CPU Frequencies usage meter for G15Daemon.
|
||
|
|
|
||
|
|
========
|
||
|
|
Features
|
||
|
|
========
|
||
|
|
|
||
|
|
* Summary Screen displays 4 or 5 indicators from CPU/Frequency/Memory/NET/Temperature/Fan Speed/Swap, along with current time.
|
||
|
|
* CPU Screen displays graphs of User/System/Nice and Idle time, along with LoadAVG and Uptime.
|
||
|
|
* Frequency Screen displays all CPU cores frequency with the total
|
||
|
|
* Memory Screen displays Memory Total & Free, and graph of Used vs Buffered+Cached Memory.
|
||
|
|
* Swap Screen displays Used, Free and Total swap space, along with the number of pages currently paged in/out.
|
||
|
|
* Network Screen displays Total bytes In/Out, history graph, Peak speed.
|
||
|
|
* Battery Status Screen displays battery charge data for up to three batteries
|
||
|
|
* Temperature Screen displays temperature status for available sensors
|
||
|
|
* Fan Speed Screen displays fan current speed for the available sensors
|
||
|
|
|
||
|
|
============
|
||
|
|
Requirements
|
||
|
|
============
|
||
|
|
|
||
|
|
- libgtop
|
||
|
|
|
||
|
|
=======
|
||
|
|
Options
|
||
|
|
=======
|
||
|
|
|
||
|
|
-i interface Gather statistics from named interface (ie -i eth0)
|
||
|
|
-d Run in background (daemonise)
|
||
|
|
-nsa Scale network graphs against highest speed recorded. The
|
||
|
|
default is to scale against the highest peak in the current graph.
|
||
|
|
-h Show help
|
||
|
|
-r seconds Set the refresh interval to seconds The seconds must be between 1 and 300. ie -r 15
|
||
|
|
-u Display unicore graphs only on the CPU screen
|
||
|
|
-t id Force to monitor temperature sensor id on start (ie -t 1). The id should point to sysfs path /sys/class/hwmon/hwmon[id]/device/temp1_input. Default the sensor id is auto-detected.
|
||
|
|
-f id Force to monitor fan speed sensor id on start (ie -f 1). The id should point to sysfs path /sys/class/hwmon/hwmon[id]/device/fan1_input. Default the sensor id is auto-detected.
|
||
|
|
-gt id Show temperature [id] in place of the maximal one on the Summary Screen with the option -gt id ie -gt 1. The id should point to sysfs path /sys/class/hwmon/hwmon../device/temp[id]_input
|
||
|
|
-df Disable monitoring CPUs frequencies.
|
||
|
|
-ir Enable the bottom info bar content rotate cycle over all available sensors
|
||
|
|
-vc The cpu cores will be calculated every time (for systems with the cpu hotplug)
|
||
|
|
|
||
|
|
=====
|
||
|
|
Usage
|
||
|
|
=====
|
||
|
|
|
||
|
|
.. code-block:: bash
|
||
|
|
|
||
|
|
g15stats
|
||
|
|
|
||
|
|
Once running, the separate screens can be switched to as follows:
|
||
|
|
|
||
|
|
L2: Previous Screen
|
||
|
|
L3: Next Screen
|
||
|
|
L4: Alternative Screen (Doesn't work on Swap, Memory and Battery Screen)
|
||
|
|
L5: Bottom Info bar mode
|
||
|
|
|
||
|
|
=============
|
||
|
|
How to donate
|
||
|
|
=============
|
||
|
|
|
||
|
|
If you find this repo useful (don't forget to pay a visit to the related
|
||
|
|
repos too), you can buy me a beer:
|
||
|
|
|
||
|
|
:BTC: 3ECzX5UhcFSRv6gBBYLNBc7zGP9UA5Ppmn
|
||
|
|
|
||
|
|
:ETH: 0x7E17Ac09Fa7e6F80284a75577B5c1cbaAD566C1c
|