Import Debian changes 1.2.4-1

libg15 (1.2.4-1) unstable; urgency=low

  * New upstream release

ChangeLog

@@ -37,15 +37,3 @@
 1.2.4
 * Turns out that the newer G15's have a different (5 byte) keyboard protocol.  
 * Optimise dumpPixmapIntoLCDFormat routine - Thanks to Adam Nielsen
-1.2.5
-* Remove 5BYTE_RETURN flag and process key packets based on length. Please
-  report any regressions.
-* Add Solaris detection and remove locks if detected.  Solaris' libUSB
-  blocks on read, forcing mutexes causes writes to block too.
-1.2.6
-* Re-Add 5BYTE_RETURN flag. Auto-detect does not work with Solaris' libusb.
-* Add laptop GamePanel support.
-1.2.7
-* Fix keypress detection for G15v2 keyboards
-1.3
-* Add support for the G13 device

Makefile.am

@@ -1,7 +1,7 @@
 LLIBDIR=@LIBDIR@ 
 lib_LTLIBRARIES = libg15.la
 libg15_la_SOURCES = libg15.h libg15.c
-libg15_la_LDFLAGS = -version-info 1:1:0
+libg15_la_LDFLAGS = -version-info 1:0:0
 include_HEADERS= libg15.h
 EXTRA_DIST = debian rpm
 

Makefile.in

@@ -0,0 +1,650 @@
+# Makefile.in generated by automake 1.10 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
+	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/config.h.in $(top_srcdir)/configure AUTHORS COPYING \
+	ChangeLog INSTALL NEWS config/config.guess config/config.sub \
+	config/depcomp config/install-sh config/ltmain.sh \
+	config/missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"
+libLTLIBRARIES_INSTALL = $(INSTALL)
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libg15_la_LIBADD =
+am_libg15_la_OBJECTS = libg15.lo
+libg15_la_OBJECTS = $(am_libg15_la_OBJECTS)
+libg15_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libg15_la_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libg15_la_SOURCES)
+DIST_SOURCES = $(libg15_la_SOURCES)
+includeHEADERS_INSTALL = $(INSTALL_HEADER)
+HEADERS = $(include_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+LLIBDIR = @LIBDIR@ 
+lib_LTLIBRARIES = libg15.la
+libg15_la_SOURCES = libg15.h libg15.c
+libg15_la_LDFLAGS = -version-info 1:0:0
+include_HEADERS = libg15.h
+EXTRA_DIST = debian rpm
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
+	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in:  $(am__configure_deps) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    f=$(am__strip_dir) \
+	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+	  else :; fi; \
+	done
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  p=$(am__strip_dir) \
+	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libg15.la: $(libg15_la_OBJECTS) $(libg15_la_DEPENDENCIES) 
+	$(libg15_la_LINK) -rpath $(libdir) $(libg15_la_OBJECTS) $(libg15_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libg15.Plo@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f=$(am__strip_dir) \
+	  echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
+	  $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; for p in $$list; do \
+	  f=$(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(includedir)/$$f"; \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d $(distdir) || mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(HEADERS) config.h
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+	mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-includeHEADERS
+
+install-dvi: install-dvi-am
+
+install-exec-am: install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-generic clean-libLTLIBRARIES clean-libtool ctags dist \
+	dist-all dist-bzip2 dist-gzip dist-hook dist-shar dist-tarZ \
+	dist-zip distcheck distclean distclean-compile \
+	distclean-generic distclean-hdr distclean-libtool \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-includeHEADERS install-info install-info-am \
+	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-includeHEADERS \
+	uninstall-libLTLIBRARIES
+
+
+dist-hook:
+	rm -rf `find $(distdir)/debian -name .svn`
+	rm -rf `find $(distdir)/rpm -name .svn`
+
+dist-rpm: dist-bzip2
+	rpmbuild -ts $(distdir).tar.bz2
+
+dist-archives:
+	$(MAKE) dist-bzip2
+	$(MAKE) dist-rpm
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

README

@@ -6,5 +6,3 @@ LibG15 currently supports LCD & keys on the following devices:
 - G11 keyboard
 - Z10 speakers
 - 2nd revision of the G15 (amber backlight, 6 'G' keys, LCD)
-- Gamepanel available on some laptops
-- G13 game device

bootstrap

@@ -1,8 +0,0 @@
-#! /bin/sh
-
-set -x
-aclocal -I config
-libtoolize --force --copy
-autoheader
-automake --add-missing --copy
-autoconf

config.h.in

@@ -0,0 +1,67 @@
+/* config.h.in.  Generated from configure.in by autoheader.  */
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `usb' library (-lusb). */
+#undef HAVE_LIBUSB
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the <usb.h> header file. */
+#undef HAVE_USB_H
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const

config/depcomp

@@ -0,0 +1,584 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2006-10-15.18
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
+# Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+  stat=$?
+
+  if test -f "$tmpdepfile"; then :
+  else
+    stripped=`echo "$stripped" | sed 's,^.*/,,'`
+    tmpdepfile="$stripped.u"
+  fi
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    outname="$stripped.o"
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mechanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

config/install-sh

@@ -0,0 +1,507 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2006-10-14.15
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+posix_glob=
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chmodcmd=$chmodprog
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+        shift
+        shift
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t) dstarg=$2
+	shift
+	shift
+	continue;;
+
+    -T) no_target_directory=true
+	shift
+	continue;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dstarg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dstarg"
+      shift # fnord
+    fi
+    shift # arg
+    dstarg=$arg
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix=/ ;;
+	-*) prefix=./ ;;
+	*)  prefix= ;;
+      esac
+
+      case $posix_glob in
+        '')
+	  if (set -f) 2>/dev/null; then
+	    posix_glob=true
+	  else
+	    posix_glob=false
+	  fi ;;
+      esac
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob && set -f
+      set fnord $dstdir
+      shift
+      $posix_glob && set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dst"; then
+	       $doit $rmcmd -f "$dst" 2>/dev/null \
+	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
+		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
+	       || {
+		 echo "$0: cannot unlink or rename $dst" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dst"
+	 }
+    } || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

config/missing

@@ -0,0 +1,367 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2006-05-10.23
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+#   Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case $1 in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $1 in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case $f in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f y.tab.h; then
+	echo >y.tab.h
+    fi
+    if test ! -f y.tab.c; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f lex.yy.c; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  tar)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case $firstarg in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case $firstarg in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

configure.in

@@ -2,11 +2,9 @@
 # Process this file with autoconf to produce a configure script.
 
 AC_PREREQ(2.59)
-AC_INIT(libg15, 1.3, mlampard@users.sourceforge.net)
+AC_INIT(libg15, 1.2.4, mlampard@users.sourceforge.net)
 AC_PREFIX_DEFAULT(/usr)
 AC_CONFIG_AUX_DIR(config)
-AC_CANONICAL_TARGET()
-
 AM_INIT_AUTOMAKE()
 AC_CONFIG_SRCDIR([libg15.c])
 AC_CONFIG_HEADER([config.h])
@@ -15,29 +13,9 @@ AC_CONFIG_HEADER([config.h])
 AC_PROG_CC
 AC_PROG_LIBTOOL
 
-case $host_os in
-	*linux*) 
-	  AC_DEFINE([OSTYPE_LINUX], [1],[Target OS is Linux])
-	  ;;
-	*darwin*)
-	  AC_DEFINE([OSTYPE_DARWIN], [1],[Target OS is Darwin])
-	  ;;
-        *solaris*)
-          AC_DEFINE([OSTYPE_SOLARIS], [1],[Target OS is Solaris])
-	  AC_SEARCH_LIBS([nanosleep],rt,[],[],[])
-          AC_DEFINE(SUN_LIBUSB, 1, [Define to 1 for Sun version of libusb.])
-	  libusb_blocks=true	  
-	  ;;
-esac
-
 # Checks for libraries.
 AC_CHECK_LIB([usb], [main], ,AC_MSG_ERROR(["libusb not found. please install it"]))
 
-dnl Some versions of libusb do not honour timeout and block. Suns' version is one of them.
-if test "x$libusb_blocks" == "xtrue"; then
-      AC_DEFINE([LIBUSB_BLOCKS], [1],[Define if libusb implementation blocks on read or write])
-fi
-
 # Checks for header files.
 AC_HEADER_STDC
 AC_CHECK_HEADERS([string.h])

debian/README.Debian

@@ -0,0 +1,10 @@
+libg15 for Debian
+-----------------
+
+Notes about hardware
+
+Notes about configuration of other packages
+
+
+
+ -- Giacomo Catenazzi <cate@debian.org>  Mon, 27 Aug 2007 07:56:10 +0200

debian/changelog

@@ -1,61 +1,18 @@
-libg15 1.2.7 edgy; urgency=low
-  * Fix keypress detection for G15v2 keyboards
+libg15 (1.2.4-1) unstable; urgency=low
 
- -- Anthony J. Mirabella <mirabeaj@gmail.com>  Mon, 24 Nov 2008 22:48:13 -0500
+  * New upstream release
 
-libg15 1.2.6 edgy; urgency=low
-  * Re-Add 5BYTE_RETURN flag. Auto-detect does not work with Solaris' libusb.
-  * Add laptop GamePanel support.
+ -- Giacomo Catenazzi <cate@debian.org>  Tue, 18 Dec 2007 08:08:43 +0100
 
-libg15 1.2.5 edgy; urgency=low
-  * Remove 5BYTE_RETURN flag and process key packets based on length. Please
-    report any regressions.
-  * Add Solaris detection and remove locks if detected.  Solaris' libUSB
-    blocks on read, forcing mutexes causes writes to block too.
+libg15 (1.2.3-1) unstable; urgency=low
 
-libg15 1.2.4 edgy; urgency=low
-  * Turns out that the newer G15's have a different (5 byte) keyboard protocol.  
-  * Optimise dumpPixmapIntoLCDFormat routine - Thanks to Adam Nielsen
+  * New upstrem version: add support of new g15 keyboards
 
-libg15 1.2.3 edgy; urgency=low
-  * Add support for the newer G15 keyboards which have amber backlights and
-    six 'G' keys.
+ -- Giacomo Catenazzi <cate@debian.org>  Thu, 15 Nov 2007 07:44:43 +0100
 
-libg15 1.2.2 edgy; urgency=low
-  * Add support for the logitech Z-10 speakers - many thanks to Dwayne Fontenot for
-    detailed information and debugging.
-
-libg15 (1.2.1) edgy; urgency=low
-  * Add debugging function to enable/disable extra output
-  * All debugging output is now prefixed with libg15 to aid localising
-    problems.
-  * debugging function now also controls libusb debugging output.
-  * Try to claim usb interface up to 10 times before failing
-  * Slow down initialisation, to allow keyboard to come out of usb
-    auto-suspend on newer kernels.
-  * Attempt to combat ENOSPC by slowing down writes to the lcd if ENOSPC is
-    received.  Unless that error occurs at least once, transfers are sent as normal.
-  * Add function to change keyboard backlight (independant of lcd backlight).
-  * Add re-initialising function, which will attempt to reconnect a keyboard
-    that was previously removed and replugged.
-  * libg15 now uses pthread mutexes to force sequential access to the bus via
-    libusb.  Control message URBs are no longer being lost if sent by a different
-    thread in the middle of a screen transfer etc.
-  * Reset the keyboard before init to ensure correct initialisation on
-    kernels > 2.6.19
-
-libg15 (1.1.1-1) edgy; urgency=low
-
-  * Add basic support for the G11 keyboard
-  * revert all bulk transfers - bulk transfers are illegal for low-speed
-    devices, and cause -22 (EINVAL) warnings on new kernels.
-  * pass most errors to the client app.
-
- -- Anthony J. Mirabella <mirabeaj@gmail.com>  Fri, 15 Dec 2006 05:17:49 -0500
-
-libg15 (1.0-1) breezy; urgency=low
+libg15 (1.2.2-1) unstable; urgency=low
 
   * Initial release
 
- -- Anthony J. Mirabella <mirabeaj@gmail.com>  Sun, 24 Sep 2006 22:57:06 -0400
+ -- Giacomo Catenazzi <cate@debian.org>  Mon, 27 Aug 2007 07:56:10 +0200
 

debian/compat

@@ -1 +1 @@
-4
+5

debian/control

@@ -1,21 +1,27 @@
 Source: libg15
-Priority: optional
-Maintainer: Mike Lampard <mlampard@users.sourceforge.net>
-Build-Depends: debhelper (>= 4.0.0), autotools-dev, libusb-dev
-Standards-Version: 3.6.2
 Section: libs
+Priority: optional
+Maintainer: Giacomo Catenazzi <cate@debian.org>
+Build-Depends: cdbs, debhelper (>= 5), autotools-dev, libusb-dev
+Standards-Version: 3.7.3
 
-Package: libg15-dev
-Section: libdevel
-Architecture: any
-Depends: libg15 (= ${Source-Version})
-Description: Development packages for libg15
- Includes the files needed for developing software that uses libg15.
-
-Package: libg15
+Package: libg15-1
 Section: libs
 Architecture: any
 Depends: ${shlibs:Depends}, ${misc:Depends}
-Description: Library for interfacing with the Logitech G15 Keyboard
- Provides for low-level control of the lcd and extra keys on the 
- Logitech G15 keyboard.
+Description: Library for interfacing with the Logitech G15 keyboards
+ libg15 provides an API for low level control of the LCD display and
+ the extra keys on some Logitech keyboards (G11, G15)
+ .
+ This package contains the shared library and the runtime data.
+
+Package: libg15-dev
+Section: libdevel
+Depends: libg15-1 (= ${binary:Version})
+Architecture: any
+Description: Library for interfacing with the Logitech G15 keyboards
+ libg15 provides an API for low level control of the LCD display and
+ the extra keys on some Logitech keyboards (G11, G15).
+ .
+ This package contains the header files and the static library.
+

debian/copyright

@@ -1,12 +1,30 @@
-This package was debianized by Anthony J. Mirabella <mirabeaj@gmail.com> on
-Sun, 24 Sep 2006 22:57:06 -0400.
+This package was debianized by Giacomo A. Catenazzi <cate@debian.org> on
+Mon, 27 Aug 2007 07:56:10 +0200.
 
-It was downloaded from sourceforge.net
+It was downloaded from http://g15tools.sourceforge.net/
 
-Copyright Holders: Philip Lawatsch <philip@lawatsch.at>
-		   Alex Ibrado <alex@ibrado.org>
-		   Autotools support added by Anthony J. Mirabella <mirabeaj@gmail.com>
+Upstream Authors: 
+
+    Philip Lawatsch <philip@lawatsch.at>
+    Alex Ibrado <alex@ibrado.org>
+    Anthony J. Mirabella <mirabeaj@gmail.com>
+
+Copyright: 
+
+    Copyright (C) 2006,2007	Philip Lawatsch <philip@lawatsch.at>
+				Alex Ibrado <alex@ibrado.org>
+				Anthony J. Mirabella <mirabeaj@gmail.com>
 
 License:
 
-GPL
+    g15tools is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+License can be found in the file `/usr/share/common-licenses/GPL-2'.
+
+
+The Debian packaging is (C) 2007, Giacomo A. Catenazzi <cate@debian.org> and
+is licensed under the GPL v2 (or later), see `/usr/share/common-licenses/GPL-2'.
+

debian/libg15-1.install

@@ -0,0 +1 @@
+debian/tmp/usr/lib/lib*.so.* usr/lib/

debian/libg15-dev.install

@@ -1,6 +1,5 @@
-usr/include/*
-usr/lib/lib*.a
-usr/lib/lib*.so
-usr/lib/pkgconfig/*
-usr/lib/*.la
-usr/share/pkgconfig/*
+debian/tmp/usr/include/* usr/include/
+debian/tmp/usr/lib/lib*.a usr/lib/
+debian/tmp/usr/lib/lib*.so usr/lib/
+debian/tmp/usr/lib/*.la usr/lib/
+

debian/rules

@@ -1,115 +1,8 @@
 #!/usr/bin/make -f
-# -*- makefile -*-
-# Sample debian/rules that uses debhelper.
-# This file was originally written by Joey Hess and Craig Small.
-# As a special exception, when this file is copied by dh-make into a
-# dh-make output file, you may use that output file without restriction.
-# This special exception was added by Craig Small in version 0.37 of dh-make.
   
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
+DEB_DH_MAKESHLIBS_ARGS_libg15 := --version-info
+
+include /usr/share/cdbs/1/rules/debhelper.mk
+include /usr/share/cdbs/1/class/autotools.mk
 
 
-# These are used for cross-compiling and for saving the configure script
-# from having to guess our platform (since we know it already)
-DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-
-
-CFLAGS = -Wall -g
-
-ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-	CFLAGS += -O0
-else
-	CFLAGS += -O2
-endif
-
-# shared library versions, option 1
-version=1.0.0
-major=1
-# option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so
-#version=`ls src/.libs/lib*.so.* | \
-# awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'`
-#major=`ls src/.libs/lib*.so.* | \
-# awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'`
-
-config.status: configure
-	dh_testdir
-	# Add here commands to configure the package.
-	CFLAGS="$(CFLAGS) -Wl,-z,defs" ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
-
-
-build: build-stamp
-build-stamp:  config.status
-	dh_testdir
-
-	# Add here commands to compile the package.
-	$(MAKE)
-
-	touch build-stamp
-
-clean:
-	dh_testdir
-	dh_testroot
-	rm -f build-stamp 
-
-	# Add here commands to clean up after the build process.
-	-$(MAKE) distclean
-ifneq "$(wildcard /usr/share/misc/config.sub)" ""
-	cp -f /usr/share/misc/config.sub config.sub
-endif
-ifneq "$(wildcard /usr/share/misc/config.guess)" ""
-	cp -f /usr/share/misc/config.guess config.guess
-endif
-
-
-	dh_clean 
-
-install: build
-	dh_testdir
-	dh_testroot
-	dh_clean -k 
-	dh_installdirs -plibg15
-	dh_installdirs -plibg15-dev
-
-	# Add here commands to install the package into debian/tmp
-	$(MAKE) install DESTDIR=$(CURDIR)/debian/tmp
-
-
-# Build architecture-independent files here.
-binary-indep: build install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
-	dh_testdir -a
-	dh_testroot -a
-	dh_installchangelogs ChangeLog -a
-	dh_installdocs -a
-	dh_installexamples -a
-	dh_install -a --sourcedir=debian/tmp
-	dh_installmenu -a
-	dh_installdebconf -a
-	dh_installlogrotate -a
-	dh_installemacsen -a
-	dh_installpam -a
-	dh_installmime -a
-	dh_installinit -a
-	dh_installcron -a
-	dh_installinfo -a
-	dh_installman -a
-	dh_link -a
-	dh_strip -a
-	dh_compress -a
-	dh_fixperms -a
-#	dh_perl -a
-#	dh_python -a
-	dh_makeshlibs -a
-	dh_installdeb -a
-	dh_shlibdeps -a
-	dh_gencontrol -a
-	dh_md5sums -a
-	dh_builddeb -a
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install 

debian/watch

@@ -0,0 +1,7 @@
+# See uscan(1) for format
+
+# Compulsory line, this is a version 3 file
+version=3
+
+http://sf.net/g15tools libg15-(.*)\.tar\.bz2
+

libg15.c

@@ -12,12 +12,12 @@
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with libg15; if not, write to the Free Software
+    along with g15lcd; if not, write to the Free Software
     Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 
-    (c) 2006-2007 The G15tools Project - g15tools.sf.net
+    (c) 2006 - 2007 The G15tools Project - g15tools.sf.net
     
-    $Revision: 324 $ -  $Date: 2011-02-24 03:13:57 +0300 (Thu, 24 Feb 2011) $ $Author: SteelSide $
+    $Revision: 270 $ -  $Date: 2007-11-25 15:32:03 +1030 (Sun, 25 Nov 2007) $ $Author: mlampard $
 */
 
 #include <pthread.h>
@@ -27,7 +27,6 @@
 #include <usb.h>
 #include <string.h>
 #include <errno.h>
-#include "config.h"
 
 static usb_dev_handle *keyboard_device = 0;
 static int libg15_debugging_enabled = 0;
@@ -39,6 +38,7 @@ static int g15_keys_endpoint = 0;
 static int g15_lcd_endpoint = 0;
 static pthread_mutex_t libusb_mutex;
 
+
 /* to add a new device, simply create a new DEVICE() in this list */
 /* Fields are: "Name",VendorID,ProductID,Capabilities */
 const libg15_devices_t g15_devices[] = {
@@ -46,11 +46,6 @@ const libg15_devices_t g15_devices[] = {
     DEVICE("Logitech G11",0x46d,0xc225,G15_KEYS),
     DEVICE("Logitech Z-10",0x46d,0x0a07,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED),
     DEVICE("Logitech G15 v2",0x46d,0xc227,G15_LCD|G15_KEYS|G15_DEVICE_5BYTE_RETURN),
-    DEVICE("Logitech Gamepanel",0x46d,0xc251,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED),
-    DEVICE("Logitech G13",0x46d,0xc21c,G15_LCD|G15_KEYS|G15_DEVICE_G13),
-    DEVICE("Logitech G110",0x46d,0xc22b,G15_KEYS),
-    DEVICE("Logitech G510",0x46d,0xc22d,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED|G15_DEVICE_G510), /* without audio activated */
-    DEVICE("Logitech G510",0x46d,0xc22e,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED|G15_DEVICE_G510), /* with audio activated */
     DEVICE(NULL,0,0,0)
 };
 
@@ -168,10 +163,6 @@ static usb_dev_handle * findAndOpenDevice(libg15_devices_t handled_device, int d
                     struct usb_config_descriptor *cfg = &dev->config[j];
 
                     for (i=0;i<cfg->bNumInterfaces; i++){
-                        if (g15DeviceCapabilities()&G15_DEVICE_G510){
-                            if (i==G510_STANDARD_KEYBOARD_INTERFACE) continue;
-                        }
-
                         struct usb_interface *ifp = &cfg->interface[i];
                         /* if endpoints are already known, finish up */
                         if(g15_keys_endpoint && g15_lcd_endpoint)
@@ -311,12 +302,6 @@ int initLibG15()
     if (retval)
         return retval;
   
-    g15_log(stderr,G15_LOG_INFO,"%s\n",PACKAGE_STRING);
-
-#ifdef SUN_LIBUSB
-    g15_log(stderr,G15_LOG_INFO,"Using Sun libusb.\n");
-#endif
-
     g15NumberOfConnectedDevices();
   
     keyboard_device = findAndOpenG15();
@@ -332,10 +317,8 @@ int exitLibG15()
 {
     int retval = G15_NO_ERROR;
     if (keyboard_device){
-#ifndef SUN_LIBUSB
         retval = usb_release_interface (keyboard_device, 0);
         usleep(50*1000);
-#endif
 #if 0
         retval = usb_reset(keyboard_device);
         usleep(50*1000);
@@ -428,7 +411,6 @@ static void dumpPixmapIntoLCDFormat(unsigned char *lcd_buffer, unsigned char con
 }
 
 int handle_usb_errors(const char *prefix, int ret) {
-
     switch (ret){
         case -ETIMEDOUT:
             return G15_ERROR_READING_USB_DEVICE;  /* backward-compatibility */
@@ -443,7 +425,7 @@ int handle_usb_errors(const char *prefix, int ret) {
             case -EAGAIN: /* try again */
             case -EFBIG: /* too many frames to handle */
             case -EMSGSIZE: /* msgsize is invalid */
-                 g15_log(stderr,G15_LOG_INFO,"usb error: %s %s (%i)\n",prefix,usb_strerror(),ret);
+                 g15_log(stderr,G15_LOG_INFO,"usb error: %s (%i)\n",prefix,ret);     
                  break;
             case -EPIPE: /* endpoint is stalled */
                  g15_log(stderr,G15_LOG_INFO,"usb error: %s EPIPE! clearing...\n",prefix);     
@@ -452,7 +434,7 @@ int handle_usb_errors(const char *prefix, int ret) {
                  pthread_mutex_unlock(&libusb_mutex);
                  break;
             default: /* timed out */
-                 g15_log(stderr,G15_LOG_INFO,"Unknown usb error: %s !! (err is %i (%s))\n",prefix,ret,usb_strerror());
+                 g15_log(stderr,G15_LOG_INFO,"Unknown usb error: %s !! (err is %i)\n",prefix,ret);     
     }
     return ret;
 }
@@ -479,9 +461,7 @@ int writePixmapToLCD(unsigned char const *data)
     I'm not sure how successful this will be in combatting ENOSPC, but we'll give it try in the real-world. */
 
     if(enospc_slowdown != 0){
-#ifndef LIBUSB_BLOCKS
         pthread_mutex_lock(&libusb_mutex);  
-#endif
         for(transfercount = 0;transfercount<=31;transfercount++){
             ret = usb_interrupt_write(keyboard_device, g15_lcd_endpoint, (char*)lcd_buffer+(32*transfercount), 32, 1000);
             if (ret != 32)
@@ -491,18 +471,12 @@ int writePixmapToLCD(unsigned char const *data)
             }
             usleep(100);
         }
-#ifndef LIBUSB_BLOCKS
         pthread_mutex_unlock(&libusb_mutex);
-#endif
     }else{
         /* transfer entire buffer in one hit */
-#ifdef LIBUSB_BLOCKS
-        ret = usb_interrupt_write(keyboard_device, g15_lcd_endpoint, (char*)lcd_buffer, G15_BUFFER_LEN, 1000);
-#else
         pthread_mutex_lock(&libusb_mutex);
         ret = usb_interrupt_write(keyboard_device, g15_lcd_endpoint, (char*)lcd_buffer, G15_BUFFER_LEN, 1000);
         pthread_mutex_unlock(&libusb_mutex);
-#endif
         if (ret != G15_BUFFER_LEN)
         {
             handle_usb_errors ("LCDPixmap Write",ret);
@@ -545,9 +519,6 @@ int setLEDs(unsigned int leds)
     unsigned char m_led_buf[4] = { 2, 4, 0, 0 };
     m_led_buf[2] = ~(unsigned char)leds;
   
-    if(g15DeviceCapabilities()&G15_DEVICE_G510)
-        setG510LEDColor(0, 255, 0);
-
     if(shared_device>0)
         return G15_ERROR_UNSUPPORTED;
 
@@ -608,21 +579,6 @@ int setKBBrightness(unsigned int level)
     return retval;
 }
 
-int setG510LEDColor(unsigned char r, unsigned char g, unsigned char b)
-{
-    int retval = 0;
-    unsigned char usb_data[] = { 4, 0, 0, 0 };
-
-    usb_data[1] = r;
-    usb_data[2] = g;
-    usb_data[3] = b;
-
-    pthread_mutex_lock(&libusb_mutex);
-    retval = usb_control_msg(keyboard_device, USB_TYPE_CLASS + USB_RECIP_INTERFACE, 9, 0x305, 1, (char*)usb_data, 4, 10000);
-    pthread_mutex_unlock(&libusb_mutex);
-    return retval;
-}
-
 static unsigned char g15KeyToLogitechKeyCode(int key)
 {
    // first 12 G keys produce F1 - F12, thats 0x3a + key
@@ -637,97 +593,7 @@ static unsigned char g15KeyToLogitechKeyCode(int key)
     }
 }
 
-static void processKeyEventG13(unsigned int *pressed_keys, unsigned char *buffer)
-{
-    int i;
-
-    *pressed_keys = 0;
-
-    g15_log(stderr,G15_LOG_WARN,"Keyboard G13: %x, %x, %x, %x, %x, %x, %x, %x, %x\n",buffer[0],buffer[1],buffer[2],buffer[3],buffer[4],buffer[5],buffer[6],buffer[7],buffer[8]);
-
-    if (buffer[0] == 0x25)
-    {
-        if (buffer[3]&0x01)
-      *pressed_keys |= G15_KEY_G1;
-        if (buffer[3]&0x02)
-      *pressed_keys |= G15_KEY_G2;
-        if (buffer[3]&0x04)
-      *pressed_keys |= G15_KEY_G3;
-        if (buffer[3]&0x08)
-      *pressed_keys |= G15_KEY_G4;
-        if (buffer[3]&0x10)
-      *pressed_keys |= G15_KEY_G5;
-        if (buffer[3]&0x20)
-      *pressed_keys |= G15_KEY_G6;
-        if (buffer[3]&0x40)
-      *pressed_keys |= G15_KEY_G7;
-        if (buffer[3]&0x80)
-      *pressed_keys |= G15_KEY_G8;
-
-        if (buffer[4]&0x01)
-      *pressed_keys |= G15_KEY_G9;
-        if (buffer[4]&0x02)
-      *pressed_keys |= G15_KEY_G10;
-        if (buffer[4]&0x04)
-      *pressed_keys |= G15_KEY_G11;
-        if (buffer[4]&0x08)
-      *pressed_keys |= G15_KEY_G12;
-        if (buffer[4]&0x10)
-      *pressed_keys |= G15_KEY_G13;
-        if (buffer[4]&0x20)
-      *pressed_keys |= G15_KEY_G14;
-        if (buffer[4]&0x40)
-      *pressed_keys |= G15_KEY_G15;
-        if (buffer[4]&0x80)
-      *pressed_keys |= G15_KEY_G16;
-        if (buffer[5]&0x01)
-      *pressed_keys |= G15_KEY_G17;
-        if (buffer[5]&0x02)
-      *pressed_keys |= G15_KEY_G18;
-        if (buffer[5]&0x04)
-      *pressed_keys |= G15_KEY_G19;
-        if (buffer[5]&0x08)
-      *pressed_keys |= G15_KEY_G20;
-        if (buffer[5]&0x10)
-      *pressed_keys |= G15_KEY_G21;
-        if (buffer[5]&0x20)
-      *pressed_keys |= G15_KEY_G22;
-        if (buffer[5]&0x80)
-      *pressed_keys |= G15_KEY_LIGHT;
-
-        if (buffer[6]&0x01)
-      *pressed_keys |= G15_KEY_L1;
-        if (buffer[6]&0x02)
-      *pressed_keys |= G15_KEY_L2;
-        if (buffer[6]&0x04)
-      *pressed_keys |= G15_KEY_L3;
-        if (buffer[6]&0x08)
-      *pressed_keys |= G15_KEY_L4;
-        if (buffer[6]&0x10)
-      *pressed_keys |= G15_KEY_L5;
-
-        if (buffer[6]&0x20)
-      *pressed_keys |= G15_KEY_M1;
-        if (buffer[6]&0x40)
-      *pressed_keys |= G15_KEY_M2;
-        if (buffer[6]&0x80)
-      *pressed_keys |= G15_KEY_M3;
-        if (buffer[7]&0x01)
-      *pressed_keys |= G15_KEY_MR;
-
-      /*
-        if (buffer[7]&0x02)
-      *pressed_keys |= G15_KEY_JOYBL;
-        if (buffer[7]&0x04)
-      *pressed_keys |= G15_KEY_JOYBD;
-        if (buffer[7]&0x08)
-      *pressed_keys |= G15_KEY_JOYBS;
-      */
-    }
-
-}
-
-static void processKeyEvent9Byte(unsigned int *pressed_keys, unsigned char *buffer)
+static void processKeyEvent8Byte(unsigned int *pressed_keys, unsigned char *buffer)
 {
     int i;
   
@@ -876,194 +742,38 @@ static void processKeyEvent5Byte(unsigned int *pressed_keys, unsigned char *buff
         if (buffer[2]&0x1)
             *pressed_keys |= G15_KEY_LIGHT;
     }
-
-    // G510
-    if (buffer[0] == 0x03)
-    {
-        if (buffer[1]&0x01)
-            *pressed_keys |= G15_KEY_G1;
-
-        if (buffer[1]&0x02)
-            *pressed_keys |= G15_KEY_G2;
-
-        if (buffer[1]&0x04)
-            *pressed_keys |= G15_KEY_G3;
-
-        if (buffer[1]&0x08)
-            *pressed_keys |= G15_KEY_G4;
-
-        if (buffer[1]&0x10)
-            *pressed_keys |= G15_KEY_G5;
-
-        if (buffer[1]&0x20)
-            *pressed_keys |= G15_KEY_G6;
-
-        if (buffer[1]&0x40)
-            *pressed_keys |= G15_KEY_G7;
-
-        if (buffer[1]&0x80)
-            *pressed_keys |= G15_KEY_G8;
-
-        if (buffer[2]&0x01)
-            *pressed_keys |= G15_KEY_G9;
-
-        if (buffer[2]&0x02)
-            *pressed_keys |= G15_KEY_G10;
-
-        if (buffer[2]&0x04)
-            *pressed_keys |= G15_KEY_G11;
-
-        if (buffer[2]&0x08)
-            *pressed_keys |= G15_KEY_G12;
-
-        if (buffer[2]&0x10)
-            *pressed_keys |= G15_KEY_G13;
-
-        if (buffer[2]&0x20)
-            *pressed_keys |= G15_KEY_G14;
-
-        if (buffer[2]&0x40)
-            *pressed_keys |= G15_KEY_G15;
-
-        if (buffer[2]&0x80)
-            *pressed_keys |= G15_KEY_G16;
-
-        if (buffer[3]&0x01)
-            *pressed_keys |= G15_KEY_G17;
-
-        if (buffer[3]&0x02)
-            *pressed_keys |= G15_KEY_G18;
-
-        if (buffer[3]&0x10)
-            *pressed_keys |= G15_KEY_M1;
-
-        if (buffer[3]&0x20)
-            *pressed_keys |= G15_KEY_M2;
-
-        if (buffer[3]&0x40)
-            *pressed_keys |= G15_KEY_M3;
-
-        if (buffer[3]&0x80)
-            *pressed_keys |= G15_KEY_MR;
-
-        if (buffer[4]&0x1)
-            *pressed_keys |= G15_KEY_L1;
-
-        if (buffer[4]&0x2)
-            *pressed_keys |= G15_KEY_L2;
-
-        if (buffer[4]&0x4)
-            *pressed_keys |= G15_KEY_L3;
-
-        if (buffer[4]&0x8)
-            *pressed_keys |= G15_KEY_L4;
-
-        if (buffer[4]&0x10)
-            *pressed_keys |= G15_KEY_L5;
-
-        if (buffer[3]&0x8)
-            *pressed_keys |= G15_KEY_LIGHT;
-    }
 }
 
-static void processKeyEvent4Byte(unsigned int *pressed_keys, unsigned char *buffer)
-{
-	int i;
-
-	*pressed_keys = 0;
-
-	g15_log(stderr,G15_LOG_WARN,"Keyboard: %x, %x, %x, %x\n",buffer[0],buffer[1],buffer[2],buffer[3]);
-
-	if (buffer[0] == 0x02)
-	{
-		if (buffer[1]&0x01)
-			*pressed_keys |= G15_KEY_G1;
-
-		if (buffer[1]&0x02)
-			*pressed_keys |= G15_KEY_G2;
-
-		if (buffer[1]&0x04)
-			*pressed_keys |= G15_KEY_G3;
-
-		if (buffer[1]&0x08)
-			*pressed_keys |= G15_KEY_G4;
-
-		if (buffer[1]&0x10)
-			*pressed_keys |= G15_KEY_G5;
-
-		if (buffer[1]&0x20)
-			*pressed_keys |= G15_KEY_G6;
-
-		if (buffer[1]&0x40)
-			*pressed_keys |= G15_KEY_G7;
-
-		if (buffer[1]&0x80)
-			*pressed_keys |= G15_KEY_G8;
-
-		if (buffer[2]&0x01)
-			*pressed_keys |= G15_KEY_G9;
-
-		if (buffer[2]&0x02)
-			*pressed_keys |= G15_KEY_G10;
-
-		if (buffer[2]&0x04)
-			*pressed_keys |= G15_KEY_G11;
-
-		if (buffer[2]&0x08)
-			*pressed_keys |= G15_KEY_G12;
-
-		if (buffer[2]&0x10)
-			*pressed_keys |= G15_KEY_M1;
-
-		if (buffer[2]&0x20)
-			*pressed_keys |= G15_KEY_M2;
-
-		if (buffer[2]&0x40)
-			*pressed_keys |= G15_KEY_M3;
-
-		if (buffer[2]&0x80)
-			*pressed_keys |= G15_KEY_MR;
-
-		if (buffer[3]&0x1)
-			*pressed_keys |= G15_KEY_LIGHT;
-	}
-}
 
 int getPressedKeys(unsigned int *pressed_keys, unsigned int timeout)
 {
-    unsigned char buffer[G15_KEY_READ_LENGTH];
+    unsigned char buffer[9];
     int ret = 0;
-    int caps = 0;
-
-#ifdef LIBUSB_BLOCKS
-    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, G15_KEY_READ_LENGTH, timeout);
-#else
     pthread_mutex_lock(&libusb_mutex);
-    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, G15_KEY_READ_LENGTH, timeout);
+    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, 9, timeout);
     pthread_mutex_unlock(&libusb_mutex);
-#endif
-    if(ret>0) {
-      if(buffer[0] == 1)
-        return G15_ERROR_TRY_AGAIN;
-    }
 
-    caps = g15DeviceCapabilities();
-    if((caps & G15_DEVICE_G13) && buffer[0]==0x25){
-      processKeyEventG13(pressed_keys, buffer);
-      return G15_NO_ERROR;
-    }
+    if(g15DeviceCapabilities() & G15_DEVICE_5BYTE_RETURN) { /* new 5byte protocol */
+      if (buffer[0] == 1)
+         return G15_ERROR_TRY_AGAIN;
+      if (ret == 5) {
        
-    switch(ret) {
-      case 4:
-          processKeyEvent4Byte(pressed_keys, buffer);
-          return G15_NO_ERROR;
-      case 5:
-          processKeyEvent5Byte(pressed_keys, buffer);
-          return G15_NO_ERROR;
-      case 9:
-          processKeyEvent9Byte(pressed_keys, buffer);
-          return G15_NO_ERROR;
-      default:
-          return handle_usb_errors("Keyboard Read", ret); /* allow the app to deal with errors */
+        processKeyEvent5Byte(pressed_keys, buffer);
+       
+        return G15_NO_ERROR;
+      }
     } 
+    else 
+    {
+      if (ret == 9)
+      {
+          if (buffer[0] == 1)
+              return G15_ERROR_TRY_AGAIN;
+    
+          processKeyEvent8Byte(pressed_keys, buffer);
+    
+          return G15_NO_ERROR;
+        }
+    }
+    return handle_usb_errors("Keyboard Read", ret); /* allow the app to deal with errors */
 }

libg15.h

@@ -17,7 +17,7 @@
     
     (c) 2006 - 2007 The G15tools Project - g15tools.sf.net
     
-    $Revision: 324 $ -  $Date: 2011-02-24 03:13:57 +0300 (Thu, 24 Feb 2011) $ $Author: SteelSide $
+    $Revision: 266 $ -  $Date: 2007-11-25 13:32:23 +1030 (Sun, 25 Nov 2007) $ $Author: mlampard $
 */
 
 #ifndef _LIBG15_H_
@@ -32,11 +32,6 @@ extern "C"
 #define G15_KEYS 2
 #define G15_DEVICE_IS_SHARED 4
 #define G15_DEVICE_5BYTE_RETURN 8
-#define G15_DEVICE_G13 16
-#define G15_DEVICE_G510 32
-
-#define G15_KEY_READ_LENGTH 9
-#define G510_STANDARD_KEYBOARD_INTERFACE	0x0
 
 typedef struct libg15_devices_t libg15_devices_t;
 
@@ -129,10 +124,6 @@ struct libg15_devices_t {
     G15_KEY_G16 = 1<<15,
     G15_KEY_G17 = 1<<16,
     G15_KEY_G18 = 1<<17,
-    G15_KEY_G19 = 1<<28,
-    G15_KEY_G20 = 1<<29,
-    G15_KEY_G21 = 1<<30,
-    G15_KEY_G22 = 1<<31,
     
     G15_KEY_M1  = 1<<18,
     G15_KEY_M2  = 1<<19,
@@ -146,11 +137,6 @@ struct libg15_devices_t {
     G15_KEY_L5  = 1<<26,
     
     G15_KEY_LIGHT = 1<<27
-
-    //need to add them to the enum but not enough positions left
-    //  G15_KEY_JOYBL = 1<<32,
-    //  G15_KEY_JOYBD = 1<<33,
-    //  G15_KEY_JOYBS = 1<<34
   };
 
   
@@ -169,7 +155,6 @@ struct libg15_devices_t {
   int setLEDs(unsigned int leds);
   int setLCDBrightness(unsigned int level);
   int setKBBrightness(unsigned int level);  
-  int setG510LEDColor(unsigned char r, unsigned char g, unsigned char b);  
 
   /* Please be warned
    * the g15 sends two different usb msgs for each key press

rpm/libg15.spec

@@ -3,11 +3,11 @@
 %define prefix	/usr
 Summary: library to control logitech G15 keyboards
 Name: libg15
-Version: 1.2.7
+Version: 1.2.4
 Release: 1
-License: GPL
+Copyright: GPL
 Group: Applications/System
-Source: http://prdownloads.sourceforge.net/g15tools/libg15-1.2.7.tar.bz2
+Source: http://prdownloads.sourceforge.net/g15tools/libg15-1.2.4.tar.bz2
 URL: http://sourceforge.net/projects/g15tools
 Distribution: Linux
 Vendor: NONE