Import Debian changes 1.2.7-1

libg15 (1.2.7-1) unstable; urgency=low

  * New upstream release

ChangeLog

@@ -42,3 +42,8 @@
   report any regressions.
 * Add Solaris detection and remove locks if detected.  Solaris' libUSB
   blocks on read, forcing mutexes causes writes to block too.
+1.2.6
+* Re-Add 5BYTE_RETURN flag. Auto-detect does not work with Solaris' libusb.
+* Add laptop GamePanel support.
+1.2.7
+* Fix keypress detection for G15v2 keyboards

Makefile.in

@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -113,6 +113,7 @@ CXXFLAGS = @CXXFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
 ECHO = @ECHO@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
@@ -135,6 +136,7 @@ LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NMEDIT = @NMEDIT@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
@@ -271,8 +273,8 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  if test -f $$p; then \
 	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
 	  else :; fi; \
 	done
 
@@ -280,8 +282,8 @@ uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
 	done
 
 clean-libLTLIBRARIES:
@@ -355,8 +357,8 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
@@ -368,8 +370,8 @@ TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
 	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
@@ -379,13 +381,12 @@ ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$tags$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$tags $$unique
@@ -442,6 +443,10 @@ dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
@@ -468,6 +473,8 @@ distcheck: dist
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
@@ -623,8 +630,8 @@ uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES
 
 .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
 	clean-generic clean-libLTLIBRARIES clean-libtool ctags dist \
-	dist-all dist-bzip2 dist-gzip dist-hook dist-shar dist-tarZ \
-	dist-zip distcheck distclean distclean-compile \
+	dist-all dist-bzip2 dist-gzip dist-hook dist-lzma dist-shar \
+	dist-tarZ dist-zip distcheck distclean distclean-compile \
 	distclean-generic distclean-hdr distclean-libtool \
 	distclean-tags distcleancheck distdir distuninstallcheck dvi \
 	dvi-am html html-am info info-am install install-am \

README

@@ -6,3 +6,4 @@ LibG15 currently supports LCD & keys on the following devices:
 - G11 keyboard
 - Z10 speakers
 - 2nd revision of the G15 (amber backlight, 6 'G' keys, LCD)
+- Gamepanel available on some laptops

aclocal.m4

@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10 -*- Autoconf -*-
+# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,14 +11,17 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
-m4_if(m4_PACKAGE_VERSION, [2.61],,
-[m4_fatal([this file was generated for autoconf 2.61.
-You have another version of autoconf.  If you want to use that,
-you should regenerate the build system entirely.], [63])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(AC_AUTOCONF_VERSION, [2.61],,
+[m4_warning([this file was generated for autoconf 2.61.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
 
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 
-# serial 51 AC_PROG_LIBTOOL
+# serial 52 AC_PROG_LIBTOOL
 
 
 # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
@@ -106,7 +109,6 @@ AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
 AC_REQUIRE([AC_OBJEXT])dnl
 AC_REQUIRE([AC_EXEEXT])dnl
 dnl
-
 AC_LIBTOOL_SYS_MAX_CMD_LEN
 AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
 AC_LIBTOOL_OBJDIR
@@ -208,6 +210,8 @@ file_magic*)
   ;;
 esac
 
+_LT_REQUIRED_DARWIN_CHECKS
+
 AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
 AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
 enable_win32_dll=yes, enable_win32_dll=no)
@@ -224,6 +228,14 @@ AC_ARG_WITH([pic],
     [pic_mode=default])
 test -z "$pic_mode" && pic_mode=default
 
+# Check if we have a version mismatch between libtool.m4 and ltmain.sh.
+#
+# Note:  This should be in AC_LIBTOOL_SETUP, _after_ $ltmain have been defined.
+#        We also should do it _before_ AC_LIBTOOL_LANG_C_CONFIG that actually
+#        calls AC_LIBTOOL_CONFIG and creates libtool.
+#
+_LT_VERSION_CHECK
+
 # Use C for the default configuration in the libtool script
 tagname=
 AC_LIBTOOL_LANG_C_CONFIG
@@ -231,6 +243,41 @@ _LT_AC_TAGCONFIG
 ])# AC_LIBTOOL_SETUP
 
 
+# _LT_VERSION_CHECK
+# -----------------
+AC_DEFUN([_LT_VERSION_CHECK],
+[AC_MSG_CHECKING([for correct ltmain.sh version])
+if test "x$ltmain" = "x" ; then
+  AC_MSG_RESULT(no)
+  AC_MSG_ERROR([
+
+*** @<:@Gentoo@:>@ sanity check failed! ***
+*** \$ltmain is not defined, please check the patch for consistency! ***
+])
+fi
+gentoo_lt_version="1.5.26"
+gentoo_ltmain_version=`sed -n '/^[[ 	]]*VERSION=/{s/^[[ 	]]*VERSION=//;p;q;}' "$ltmain"`
+if test "x$gentoo_lt_version" != "x$gentoo_ltmain_version" ; then
+  AC_MSG_RESULT(no)
+  AC_MSG_ERROR([
+
+*** @<:@Gentoo@:>@ sanity check failed! ***
+*** libtool.m4 and ltmain.sh have a version mismatch! ***
+*** (libtool.m4 = $gentoo_lt_version, ltmain.sh = $gentoo_ltmain_version) ***
+
+Please run:
+
+  libtoolize --copy --force
+
+if appropriate, please contact the maintainer of this
+package (or your distribution) for help.
+])
+else
+  AC_MSG_RESULT(yes)
+fi
+])# _LT_VERSION_CHECK
+
+
 # _LT_AC_SYS_COMPILER
 # -------------------
 AC_DEFUN([_LT_AC_SYS_COMPILER],
@@ -287,9 +334,80 @@ ac_outfile=conftest.$ac_objext
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$rm -r conftest*
 ])# _LT_LINKER_BOILERPLATE
 
+# _LT_REQUIRED_DARWIN_CHECKS
+# --------------------------
+# Check for some things on darwin
+AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+   # By default we will add the -single_module flag. You can override
+   # by either setting the environment variable LT_MULTI_MODULE
+   # non-empty at configure time, or by adding -multi_module to the
+   # link flags.
+   echo "int foo(void){return 1;}" > conftest.c
+   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+     -dynamiclib ${wl}-single_module conftest.c
+   if test -f libconftest.dylib; then
+     lt_cv_apple_cc_single_mod=yes
+     rm -rf libconftest.dylib*
+   fi
+   rm conftest.c
+      fi])
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+   [lt_cv_ld_exported_symbols_list=yes],
+   [lt_cv_ld_exported_symbols_list=no])
+   LDFLAGS="$save_LDFLAGS"
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[0123]])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*)
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+   10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+   10.[[012]]*)
+     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+   10.*)
+     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil="~$DSYMUTIL \$lib || :"
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+])
 
 # _LT_AC_SYS_LIBPATH_AIX
 # ----------------------
@@ -614,7 +732,11 @@ sparc*-*solaris*)
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
       yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)    LD="${LD-ld} -64" ;;
+      *)
+        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
       esac
       ;;
     esac
@@ -707,7 +829,7 @@ AC_CACHE_CHECK([$1], [$2],
        $2=yes
      fi
    fi
-   $rm conftest*
+   $rm -r conftest*
    LDFLAGS="$save_LDFLAGS"
 ])
 
@@ -978,7 +1100,7 @@ else
     AC_CHECK_FUNC([shl_load],
 	  [lt_cv_dlopen="shl_load"],
       [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
 	[AC_CHECK_FUNC([dlopen],
 	      [lt_cv_dlopen="dlopen"],
 	  [AC_CHECK_LIB([dl], [dlopen],
@@ -986,7 +1108,7 @@ else
 	    [AC_CHECK_LIB([svld], [dlopen],
 		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
 	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
 	      ])
 	    ])
 	  ])
@@ -1303,7 +1425,7 @@ aix3*)
   soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
-aix4* | aix5*)
+aix[[4-9]]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -1471,7 +1593,14 @@ freebsd* | dragonfly*)
     *) objformat=elf ;;
     esac
   fi
-  version_type=freebsd-$objformat
+  # Handle Gentoo/FreeBSD as it was Linux
+  case $host_vendor in
+    gentoo)
+      version_type=linux ;;
+    *)
+      version_type=freebsd-$objformat ;;
+  esac
+
   case $version_type in
     freebsd-elf*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
@@ -1482,6 +1611,12 @@ freebsd* | dragonfly*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
+    linux)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+      soname_spec='${libname}${release}${shared_ext}$major'
+      need_lib_prefix=no
+      need_version=no
+      ;;
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
@@ -1629,27 +1764,10 @@ linux* | k*bsd*-gnu)
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-    if AC_TRY_EVAL(ac_compile); then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
-
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
     lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -1841,6 +1959,13 @@ esac
 AC_MSG_RESULT([$dynamic_linker])
 test "$dynamic_linker" = no && can_build_shared=no
 
+AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
+[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
+[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
@@ -2340,7 +2465,7 @@ lt_cv_deplibs_check_method='unknown'
 # whether `pass_all' will *always* work, you probably want this one.
 
 case $host_os in
-aix4* | aix5*)
+aix[[4-9]]*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -2776,7 +2901,7 @@ aix3*)
   fi
   ;;
 
-aix4* | aix5*)
+aix[[4-9]]*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
@@ -2833,6 +2958,7 @@ _LT_AC_TAGVAR(postdep_objects, $1)=
 _LT_AC_TAGVAR(predeps, $1)=
 _LT_AC_TAGVAR(postdeps, $1)=
 _LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
 
 # Source file extension for C++ test sources.
 ac_ext=cpp
@@ -2942,7 +3068,7 @@ case $host_os in
     # FIXME: insert proper C++ library support
     _LT_AC_TAGVAR(ld_shlibs, $1)=no
     ;;
-  aix4* | aix5*)
+  aix[[4-9]]*)
     if test "$host_cpu" = ia64; then
       # On IA64, the linker does run time linking by default, so we don't
       # have to do anything special.
@@ -2955,7 +3081,7 @@ case $host_os in
       # Test if we are trying to use run time linking or normal
       # AIX style linking. If -brtl is somewhere in LDFLAGS, we
       # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	for ld_flag in $LDFLAGS; do
 	  case $ld_flag in
 	  *-brtl*)
@@ -3101,51 +3227,23 @@ case $host_os in
     fi
   ;;
       darwin* | rhapsody*)
-        case $host_os in
-        rhapsody* | darwin1.[[012]])
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[[012]])
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-        esac
       _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_AC_TAGVAR(hardcode_direct, $1)=no
       _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes ; then
-      lt_int_apple_cc_single_mod=no
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+      if test "$GXX" = yes ; then
       output_verbose_link_cmd='echo'
-      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
-       lt_int_apple_cc_single_mod=yes
+      _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+      _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+      _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
       fi
-      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      else
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-        fi
-        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          else
-            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          fi
-            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
       else
       case $cc_basename in
         xlc*)
@@ -3396,7 +3494,7 @@ case $host_os in
 	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 	;;
-      pgCC*)
+      pgCC* | pgcpp*)
         # Portland Group C++ compiler
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
   	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
@@ -3831,7 +3929,8 @@ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
 # compiler output when linking a shared library.
 # Parse the compiler output and extract the necessary
 # objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
 dnl we can't use the lt_simple_compile_test_code here,
 dnl because it contains code intended for an executable,
 dnl not a library.  It's possible we should let each
@@ -3956,6 +4055,11 @@ fi
 
 $rm -f confest.$objext
 
+_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+  _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
 # PORTME: override above test on systems where it is broken
 ifelse([$1],[CXX],
 [case $host_os in
@@ -4012,7 +4116,6 @@ solaris*)
   ;;
 esac
 ])
-
 case " $_LT_AC_TAGVAR(postdeps, $1) " in
 *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
 esac
@@ -4097,7 +4200,7 @@ aix3*)
     postinstall_cmds='$RANLIB $lib'
   fi
   ;;
-aix4* | aix5*)
+aix[[4-9]]*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
@@ -4162,7 +4265,6 @@ CC=${GCJ-"gcj"}
 compiler=$CC
 _LT_AC_TAGVAR(compiler, $1)=$CC
 _LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(LD, $1)="$LD"
 
 # GCJ did not exist at the time GCC didn't implicitly link libc in.
 _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
@@ -4275,6 +4377,7 @@ if test -f "$ltmain"; then
     _LT_AC_TAGVAR(predeps, $1) \
     _LT_AC_TAGVAR(postdeps, $1) \
     _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
+    _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
     _LT_AC_TAGVAR(archive_cmds, $1) \
     _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
     _LT_AC_TAGVAR(postinstall_cmds, $1) \
@@ -4337,7 +4440,7 @@ ifelse([$1], [],
 # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
 # Free Software Foundation, Inc.
 #
 # This file is part of GNU Libtool:
@@ -4427,9 +4530,6 @@ CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
 # Is the compiler the GNU C compiler?
 with_gcc=$_LT_AC_TAGVAR(GCC, $1)
 
-gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\`
-gcc_ver=\`gcc -dumpversion\`
-
 # An ERE matcher.
 EGREP=$lt_EGREP
 
@@ -4563,11 +4663,11 @@ striplib=$lt_striplib
 
 # Dependencies to place before the objects being linked to create a
 # shared library.
-predep_objects=\`echo $lt_[]_LT_AC_TAGVAR(predep_objects, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\`
+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
 
 # Dependencies to place after the objects being linked to create a
 # shared library.
-postdep_objects=\`echo $lt_[]_LT_AC_TAGVAR(postdep_objects, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\`
+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
 
 # Dependencies to place before the objects being linked to create a
 # shared library.
@@ -4577,9 +4677,13 @@ predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
 # shared library.
 postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
 
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
+
 # The library search path used internally by the compiler when linking
 # a shared library.
-compiler_lib_search_path=\`echo $lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\`
+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
 
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$lt_deplibs_check_method
@@ -4659,7 +4763,7 @@ variables_saved_for_relink="$variables_saved_for_relink"
 link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
 
 # Compile-time system search path for libraries
-sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\`
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
 # Run-time system search path for libraries
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
@@ -4926,7 +5030,7 @@ EOF
     echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
     cat conftest.$ac_ext >&5
   fi
-  rm -f conftest* conftst*
+  rm -rf conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
   if test "$pipe_works" = yes; then
@@ -4983,7 +5087,8 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       # built for inclusion in a dll (and should export symbols for example).
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      m4_if([$1], [GCJ], [],
+	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
     darwin* | rhapsody*)
       # PIC is the default on this platform
@@ -5020,7 +5125,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
     esac
   else
     case $host_os in
-      aix4* | aix5*)
+      aix[[4-9]]*)
 	# All AIX code is PIC.
 	if test "$host_cpu" = ia64; then
 	  # AIX 5 now supports IA64 processor
@@ -5116,7 +5221,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
 	    ;;
-	  pgCC*)
+	  pgCC* | pgcpp*)
 	    # Portland Group C++ compiler.
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
@@ -5267,7 +5372,8 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
       # built for inclusion in a dll (and should export symbols for example).
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      m4_if([$1], [GCJ], [],
+	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
 
     darwin* | rhapsody*)
@@ -5337,7 +5443,8 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
     mingw* | cygwin* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      m4_if([$1], [GCJ], [],
+	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
 
     hpux9* | hpux10* | hpux11*)
@@ -5474,7 +5581,7 @@ AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
 #
 if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
   AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
+    _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
     [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
     [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
      "" | " "*) ;;
@@ -5498,7 +5605,7 @@ esac
 #
 wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
 AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+  _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
   $lt_tmp_static_flag,
   [],
   [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
@@ -5514,7 +5621,7 @@ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
 ifelse([$1],[CXX],[
   _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   case $host_os in
-  aix4* | aix5*)
+  aix[[4-9]]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
     if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
@@ -5533,6 +5640,7 @@ ifelse([$1],[CXX],[
     _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   esac
+  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
 ],[
   runpath_var=
   _LT_AC_TAGVAR(allow_undefined_flag, $1)=
@@ -5563,12 +5671,14 @@ ifelse([$1],[CXX],[
   # it will be wrapped by ` (' and `)$', so one must not match beginning or
   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
   # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
   # the symbol is explicitly referenced.  Since portable code cannot
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
   extract_expsyms_cmds=
   # Just being paranoid about ensuring that cc_basename is set.
   _LT_CC_BASENAME([$compiler])
@@ -5618,7 +5728,7 @@ ifelse([$1],[CXX],[
 
     # See if GNU ld supports shared libraries.
     case $host_os in
-    aix3* | aix4* | aix5*)
+    aix[[3-9]]*)
       # On AIX/PPC, the GNU linker is very broken
       if test "$host_cpu" != ia64; then
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -5837,7 +5947,7 @@ _LT_EOF
       fi
       ;;
 
-    aix4* | aix5*)
+    aix[[4-9]]*)
       if test "$host_cpu" = ia64; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
@@ -5857,7 +5967,7 @@ _LT_EOF
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
 	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	  for ld_flag in $LDFLAGS; do
   	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
   	    aix_use_runtimelinking=yes
@@ -6017,11 +6127,10 @@ _LT_EOF
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
     if test "$GCC" = yes ; then
     	output_verbose_link_cmd='echo'
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+        _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+        _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
     else
       case $cc_basename in
         xlc*)
@@ -6602,7 +6711,7 @@ AC_SUBST([SED])
 AC_MSG_RESULT([$SED])
 ])
 
-# Copyright (C) 2002, 2003, 2005, 2006  Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006, 2007  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -6617,7 +6726,7 @@ AC_DEFUN([AM_AUTOMAKE_VERSION],
 [am__api_version='1.10'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.10], [],
+m4_if([$1], [1.10.1], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -6633,8 +6742,10 @@ m4_define([_AM_AUTOCONF_VERSION], [])
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10])dnl
-_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
+[AM_AUTOMAKE_VERSION([1.10.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
@@ -6906,7 +7017,7 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
   # each Makefile.in and add a new line on top of each file to say so.
   # Grep'ing the whole file is not good either: AIX grep has a line
   # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
     dirpart=`AS_DIRNAME("$mf")`
   else
     continue
@@ -6954,13 +7065,13 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
 # Do all the work for Automake.                             -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
+# 2005, 2006, 2008 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 12
+# serial 13
 
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
@@ -7065,16 +7176,17 @@ AC_PROVIDE_IFELSE([AC_PROG_OBJC],
 # our stamp files there.
 AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
 [# Compute $1's index in $config_headers.
+_am_arg=$1
 _am_stamp_count=1
 for _am_header in $config_headers :; do
   case $_am_header in
-    $1 | $1:* )
+    $_am_arg | $_am_arg:* )
       break ;;
     * )
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
 # Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
 #
@@ -7346,7 +7458,7 @@ AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
 # _AM_SUBST_NOTMAKE(VARIABLE)
 # ---------------------------
-# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
 # This macro is traced by Automake.
 AC_DEFUN([_AM_SUBST_NOTMAKE])
 

config/config.guess

@@ -1,10 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-#   Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   Free Software Foundation, Inc.
 
-timestamp='2007-05-17'
+timestamp='2008-01-23'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -56,8 +56,8 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -139,6 +139,23 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
+if [ "${UNAME_SYSTEM}" = "Linux" ] ; then
+	eval $set_cc_for_build
+	cat << EOF > $dummy.c
+	#include <features.h>
+	#ifdef __UCLIBC__
+	# ifdef __UCLIBC_CONFIG_VERSION__
+	LIBC=uclibc __UCLIBC_CONFIG_VERSION__
+	# else
+	LIBC=uclibc
+	# endif
+	#else
+	LIBC=gnu
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep LIBC= | sed -e 's: ::g'`
+fi
+
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -330,7 +347,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
-    i86pc:SunOS:5.*:* | ix86xen:SunOS:5.*:*)
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
@@ -532,7 +549,7 @@ EOF
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[45])
+    *:AIX:*:[456])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -799,6 +816,9 @@ EOF
 	    EM64T | authenticamd)
 		echo x86_64-unknown-interix${UNAME_RELEASE}
 		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
 	esac ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
@@ -833,28 +853,35 @@ EOF
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
     arm*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	else
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+	fi
 	exit ;;
     avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     cris:Linux:*:*)
-	echo cris-axis-linux-gnu
+	echo cris-axis-linux-${LIBC}
 	exit ;;
     crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
+	echo crisv32-axis-linux-${LIBC}
 	exit ;;
     frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
+    	echo frv-unknown-linux-${LIBC}
 	exit ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     mips:Linux:*:*)
 	eval $set_cc_for_build
@@ -877,7 +904,7 @@ EOF
 		s: ::g
 		p
 	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
     mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -900,16 +927,16 @@ EOF
 		s: ::g
 		p
 	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
     or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
+	echo or32-unknown-linux-${LIBC}
 	exit ;;
     ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
+	echo powerpc-unknown-linux-${LIBC}
 	exit ;;
     ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
+	echo powerpc64-unknown-linux-${LIBC}
 	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
@@ -922,40 +949,40 @@ EOF
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
         esac
 	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
 	esac
 	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
+	echo hppa64-unknown-linux-${LIBC}
 	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
 	echo ${UNAME_MACHINE}-ibm-linux
 	exit ;;
     sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+    	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
 	exit ;;
     x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
+	echo x86_64-unknown-linux-${LIBC}
 	exit ;;
-    xtensa:Linux:*:*)
-    	echo xtensa-unknown-linux-gnu
+    xtensa*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
@@ -970,20 +997,22 @@ EOF
 				    p'`
         case "$ld_supported_targets" in
 	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-${LIBC}"
 		;;
 	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}aout"
 		exit ;;
 	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}coff"
 		exit ;;
 	  "")
 		# Either a pre-BFD a.out linker (linux-gnuoldld) or
 		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}oldld"
 		exit ;;
 	esac
+	# This should get integrated into the C code below, but now we hack
+	if [ "$LIBC" != "gnu" ] ; then echo "$TENTATIVE" && exit 0 ; fi
 	# Determine whether the default compiler is a.out or elf
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -1474,9 +1503,9 @@ This script, last modified $timestamp, has failed to recognize
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
 
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 and
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
 
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be

config/config.sub

@@ -1,10 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-#   Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   Free Software Foundation, Inc.
 
-timestamp='2007-04-29'
+timestamp='2008-01-16'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -72,8 +72,8 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -244,7 +244,7 @@ case $basic_machine in
 	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
 	| bfin \
 	| c4x | clipper \
-	| d10v | d30v | dlx | dsp16xx \
+	| d10v | d30v | dlx | dsp16xx | dvp \
 	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
@@ -277,7 +277,7 @@ case $basic_machine in
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
 	| score \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[24]a*eb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -358,7 +358,7 @@ case $basic_machine in
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]a*eb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
@@ -369,10 +369,14 @@ case $basic_machine in
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
 	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
-	| xstormy16-* | xtensa-* \
+	| xstormy16-* | xtensa*-* \
 	| ymp-* \
 	| z8k-*)
 		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
+		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
 	386bsd)
@@ -443,6 +447,14 @@ case $basic_machine in
 		basic_machine=ns32k-sequent
 		os=-dynix
 		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
@@ -475,8 +487,8 @@ case $basic_machine in
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16c)
-		basic_machine=cr16c-unknown
+	cr16)
+		basic_machine=cr16-unknown
 		os=-elf
 		;;
 	crds | unos)
@@ -668,6 +680,14 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	m88k-omron*)
 		basic_machine=m88k-omron
 		;;
@@ -694,6 +714,24 @@ case $basic_machine in
 		basic_machine=m68k-atari
 		os=-mint
 		;;
+	mipsEE* | ee | ps2)
+		basic_machine=mips64r5900el-scei
+		case $os in
+		    -linux*)
+			;;
+		    *)
+			os=-elf
+			;;
+		esac
+		;;
+	iop)
+		basic_machine=mipsel-scei
+		os=-irx
+		;;
+	dvp)
+		basic_machine=dvp-scei
+		os=-elf
+		;;
 	mips3*-*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
 		;;
@@ -813,6 +851,14 @@ case $basic_machine in
 		basic_machine=i860-intel
 		os=-osf
 		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	pbd)
 		basic_machine=sparc-tti
 		;;
@@ -1021,6 +1067,10 @@ case $basic_machine in
 		basic_machine=tic6x-unknown
 		os=-coff
 		;;
+	tile*)
+		basic_machine=tile-unknown
+		os=-linux-gnu
+		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -1226,7 +1276,7 @@ case $os in
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -irx*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)

config/depcomp

@@ -1,9 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2006-10-15.18
+scriptversion=2007-03-29.01
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
 # Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
@@ -215,34 +215,39 @@ aix)
   # current directory.  Also, the AIX compiler puts `$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
   stat=$?
 
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
   if test $stat -eq 0; then :
   else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
   if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile

config/install-sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2006-10-14.15
+scriptversion=2006-12-25.00
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -48,7 +48,7 @@ IFS=" ""	$nl"
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
 if test -z "$doit"; then
   doit_exec=exec
 else
@@ -58,34 +58,49 @@ fi
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
 
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
 
-posix_glob=
 posix_mkdir=
 
 # Desired mode of installed file.
 mode=0755
 
+chgrpcmd=
 chmodcmd=$chmodprog
 chowncmd=
-chgrpcmd=
-stripcmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
 src=
 dst=
 dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
 no_target_directory=
 
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
    or: $0 [OPTION]... -t DIRECTORY SRCFILES...
    or: $0 [OPTION]... -d DIRECTORIES...
@@ -95,65 +110,55 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
 In the 4th, create DIRECTORIES.
 
 Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
 "
 
 while test $# -ne 0; do
   case $1 in
-    -c) shift
-        continue;;
+    -c) ;;
 
-    -d) dir_arg=true
-        shift
-        continue;;
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
     --help) echo "$usage"; exit $?;;
 
     -m) mode=$2
-        shift
-        shift
 	case $mode in
 	  *' '* | *'	'* | *'
 '*	  | *'*'* | *'?'* | *'['*)
 	    echo "$0: invalid mode: $mode" >&2
 	    exit 1;;
 	esac
-        continue;;
+	shift;;
 
     -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
+    -s) stripcmd=$stripprog;;
 
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
+    -t) dst_arg=$2
+	shift;;
 
-    -T) no_target_directory=true
-	shift
-	continue;;
+    -T) no_target_directory=true;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
@@ -165,21 +170,22 @@ while test $# -ne 0; do
 
     *)  break;;
   esac
+  shift
 done
 
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
   # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
   # Otherwise, the last argument is the destination.  Remove it from $@.
   for arg
   do
-    if test -n "$dstarg"; then
+    if test -n "$dst_arg"; then
       # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dstarg"
+      set fnord "$@" "$dst_arg"
       shift # fnord
     fi
     shift # arg
-    dstarg=$arg
+    dst_arg=$arg
   done
 fi
 
@@ -224,7 +230,7 @@ for src
 do
   # Protect names starting with `-'.
   case $src in
-    -*) src=./$src ;;
+    -*) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
@@ -242,22 +248,22 @@ do
       exit 1
     fi
 
-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
       echo "$0: no destination specified." >&2
       exit 1
     fi
 
-    dst=$dstarg
+    dst=$dst_arg
     # Protect names starting with `-'.
     case $dst in
-      -*) dst=./$dst ;;
+      -*) dst=./$dst;;
     esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
       if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
+	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
       fi
       dstdir=$dst
@@ -378,26 +384,19 @@ do
       # directory the slow way, step by step, checking for races as we go.
 
       case $dstdir in
-	/*) prefix=/ ;;
-	-*) prefix=./ ;;
-	*)  prefix= ;;
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
       esac
 
-      case $posix_glob in
-        '')
-	  if (set -f) 2>/dev/null; then
-	    posix_glob=true
-	  else
-	    posix_glob=false
-	  fi ;;
-      esac
+      eval "$initialize_posix_glob"
 
       oIFS=$IFS
       IFS=/
-      $posix_glob && set -f
+      $posix_glob set -f
       set fnord $dstdir
       shift
-      $posix_glob && set +f
+      $posix_glob set +f
       IFS=$oIFS
 
       prefixes=
@@ -459,41 +458,54 @@ do
     # ignore errors from any of these, just make sure not to ignore
     # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
 
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
 
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dst"; then
-	       $doit $rmcmd -f "$dst" 2>/dev/null \
-	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
-		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
-	       || {
-		 echo "$0: cannot unlink or rename $dst" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
 
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dst"
-	 }
-    } || exit 1
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
 
     trap '' 0
   fi

config/ltmain.sh

@@ -2,7 +2,7 @@
 # NOTE: Changing this file will not affect anything until you rerun configure.
 #
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007  Free Software Foundation, Inc.
+# 2007, 2008  Free Software Foundation, Inc.
 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
 # This program is free software; you can redistribute it and/or modify
@@ -33,9 +33,6 @@ basename="s,^.*/,,g"
 # function.
 progpath="$0"
 
-# define SED for historic ltconfig's generated by Libtool 1.3
-test -z "$SED" && SED=sed
-
 # The name of this program:
 progname=`echo "$progpath" | $SED $basename`
 modename="$progname"
@@ -46,8 +43,8 @@ EXIT_FAILURE=1
 
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=1.5.24
-TIMESTAMP=" (1.1220.2.456 2007/06/24 02:25:32)"
+VERSION=1.5.26
+TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)"
 
 # Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -116,15 +113,21 @@ esac
 # These must not be set unconditionally because not all systems understand
 # e.g. LANG=C (notably SCO).
 # We save the old values to restore during execute mode.
-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+lt_env=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
 do
   eval "if test \"\${$lt_var+set}\" = set; then
 	  save_$lt_var=\$$lt_var
+	  lt_env=\"$lt_var=\$$lt_var \$lt_env\"
 	  $lt_var=C
 	  export $lt_var
 	fi"
 done
 
+if test -n "$lt_env"; then
+  lt_env="env $lt_env"
+fi
+
 # Make sure IFS has a sensible default
 lt_nl='
 '
@@ -278,7 +281,21 @@ func_infer_tag ()
 	    esac
 	    CC_quoted="$CC_quoted $arg"
 	  done
+	    # user sometimes does CC=<HOST>-gcc so we need to match that to 'gcc'
+	    trimedcc=`echo ${CC} | $SED -e "s/${host}-//g"`
+	    # and sometimes libtool has CC=<HOST>-gcc but user does CC=gcc
+	    extendcc=${host}-${CC}
+	    # and sometimes libtool has CC=<OLDHOST>-gcc but user has CC=<NEWHOST>-gcc  
+	    # (Gentoo-specific hack because we always export $CHOST)
+	    mungedcc=${CHOST-${host}}-${trimedcc}
 	    case "$@ " in
+	      "cc "* | " cc "* | "${host}-cc "* | " ${host}-cc "*|\
+	      "gcc "* | " gcc "* | "${host}-gcc "* | " ${host}-gcc "*)
+	      tagname=CC
+	      break ;;
+	      "$trimedcc "* | " $trimedcc "* | "`$echo $trimedcc` "* | " `$echo $trimedcc` "*|\
+	      "$extendcc "* | " $extendcc "* | "`$echo $extendcc` "* | " `$echo $extendcc` "*|\
+	      "$mungedcc "* | " $mungedcc "* | "`$echo $mungedcc` "* | " `$echo $mungedcc` "*|\
 	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
 	      # The compiler in the base compile command matches
 	      # the one in the tagged configuration.
@@ -488,7 +505,7 @@ do
     echo "\
 $PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
 
-Copyright (C) 2007  Free Software Foundation, Inc.
+Copyright (C) 2008  Free Software Foundation, Inc.
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
     exit $?
@@ -791,6 +808,7 @@ if test -z "$show_help"; then
     *.for) xform=for ;;
     *.java) xform=java ;;
     *.obj) xform=obj ;;
+    *.sx) xform=sx ;;
     esac
 
     libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
@@ -884,7 +902,7 @@ if test -z "$show_help"; then
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
     if test "$need_locks" = yes; then
-      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+      until $run ln "$srcfile" "$lockfile" 2>/dev/null; do
 	$show "Waiting for $lockfile to be removed"
 	sleep 2
       done
@@ -959,7 +977,7 @@ EOF
       $run $rm "$lobj" "$output_obj"
 
       $show "$command"
-      if $run eval "$command"; then :
+      if $run eval $lt_env "$command"; then :
       else
 	test -n "$output_obj" && $run $rm $removelist
 	exit $EXIT_FAILURE
@@ -1031,7 +1049,7 @@ EOF
       command="$command$suppress_output"
       $run $rm "$obj" "$output_obj"
       $show "$command"
-      if $run eval "$command"; then :
+      if $run eval $lt_env "$command"; then :
       else
 	$run $rm $removelist
 	exit $EXIT_FAILURE
@@ -1164,6 +1182,7 @@ EOF
     thread_safe=no
     vinfo=
     vinfo_number=no
+    single_module="${wl}-single_module"
 
     func_infer_tag $base_compile
 
@@ -1649,6 +1668,11 @@ EOF
 	continue
 	;;
 
+      -multi_module)
+	single_module="${wl}-multi_module"
+	continue
+	;;
+
       -module)
 	module=yes
 	continue
@@ -2152,7 +2176,12 @@ EOF
 	    continue
 	  fi
 	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
 	    for search_ext in .la $std_shrext .so .a; do
 	      # Search the libtool library
 	      lib="$searchdir/lib${name}${search_ext}"
@@ -2948,12 +2977,18 @@ EOF
 		  # we do not want to link against static libs,
 		  # but need to link against shared
 		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		  if test -n "$deplibrary_names" ; then
 		    for tmp in $deplibrary_names ; do
 		      depdepl=$tmp
 		    done
-		    if test -f "$path/$depdepl" ; then
+		    if test -f "$deplibdir/$depdepl" ; then
+		      depdepl="$deplibdir/$depdepl"
+	      	    elif test -f "$path/$depdepl" ; then
 		      depdepl="$path/$depdepl"
+		    else
+		      # Can't find it, oh well...
+		      depdepl=
 		    fi
 		    # do not add paths which are already there
 		    case " $newlib_search_path " in
@@ -3101,9 +3136,10 @@ EOF
 
     case $linkmode in
     oldlib)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
-      fi
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;;
+      esac
 
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
@@ -4018,23 +4054,15 @@ EOF
 	fi
 
 	tmp_deplibs=
-	inst_prefix_arg=
 	for test_deplib in $deplibs; do
 		case " $convenience " in
 		*" $test_deplib "*) ;;
 		*)
-			if test -n "$inst_prefix_dir" && (echo "$test_deplib" | grep -- "$inst_prefix_dir" >/dev/null); then
-				inst_prefix_arg="$inst_prefix_arg $test_deplib"
-			else
-				tmp_deplibs="$tmp_deplibs $test_deplib"
-			fi
+			tmp_deplibs="$tmp_deplibs $test_deplib"
 			;;
 		esac
 	done
 	deplibs="$tmp_deplibs"
-	if test -n "$inst_prefix_arg"; then
-		deplibs="$inst_prefix_arg $deplibs"
-	fi
 
 	if test -n "$convenience"; then
 	  if test -n "$whole_archive_flag_spec"; then
@@ -4248,9 +4276,10 @@ EOF
       ;;
 
     obj)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-      fi
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;;
+      esac
 
       if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
@@ -5453,6 +5482,11 @@ else
 	$echo >> $output "\
     if test \"\$libtool_execute_magic\" != \"$magic\"; then
       # Run the actual program with our arguments.
+
+      # Make sure env LD_LIBRARY_PATH does not mess us up
+      if test -n \"\${LD_LIBRARY_PATH+set}\"; then
+        export LD_LIBRARY_PATH=\$progdir:\$LD_LIBRARY_PATH
+      fi
 "
 	case $host in
 	# Backslashes separate directories on plain windows
@@ -6489,7 +6523,7 @@ relink_command=\"$relink_command\""
       fi
 
       # Restore saved environment variables
-      for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
       do
 	eval "if test \"\${save_$lt_var+set}\" = set; then
 		$lt_var=\$save_$lt_var; export $lt_var

configure.in

@@ -2,7 +2,7 @@
 # Process this file with autoconf to produce a configure script.
 
 AC_PREREQ(2.59)
-AC_INIT(libg15, 1.2.5, mlampard@users.sourceforge.net)
+AC_INIT(libg15, 1.2.7, mlampard@users.sourceforge.net)
 AC_PREFIX_DEFAULT(/usr)
 AC_CONFIG_AUX_DIR(config)
 AC_CANONICAL_TARGET()

debian/README.Debian

@@ -0,0 +1,10 @@
+libg15 for Debian
+-----------------
+
+Notes about hardware
+
+Notes about configuration of other packages
+
+
+
+ -- Giacomo Catenazzi <cate@debian.org>  Mon, 27 Aug 2007 07:56:10 +0200

debian/changelog

@@ -1,34 +1,36 @@
-libg15 (1.2.1) edgy; urgency=low
-  * Add debugging function to enable/disable extra output
-  * All debugging output is now prefixed with libg15 to aid localising
-    problems.
-  * debugging function now also controls libusb debugging output.
-  * Try to claim usb interface up to 10 times before failing
-  * Slow down initialisation, to allow keyboard to come out of usb
-    auto-suspend on newer kernels.
-  * Attempt to combat ENOSPC by slowing down writes to the lcd if ENOSPC is
-    received.  Unless that error occurs at least once, transfers are sent as normal.
-  * Add function to change keyboard backlight (independant of lcd backlight).
-  * Add re-initialising function, which will attempt to reconnect a keyboard
-    that was previously removed and replugged.
-  * libg15 now uses pthread mutexes to force sequential access to the bus via
-    libusb.  Control message URBs are no longer being lost if sent by a different
-    thread in the middle of a screen transfer etc.
-  * Reset the keyboard before init to ensure correct initialisation on
-    kernels > 2.6.19
+libg15 (1.2.7-1) unstable; urgency=low
 
-libg15 (1.1.1-1) edgy; urgency=low
+  * New upstream release
 
-  * Add basic support for the G11 keyboard
-  * revert all bulk transfers - bulk transfers are illegal for low-speed
-    devices, and cause -22 (EINVAL) warnings on new kernels.
-  * pass most errors to the client app.
+ -- Giacomo Catenazzi <cate@debian.org>  Wed, 22 Apr 2009 07:24:53 +0200
 
- -- Anthony J. Mirabella <mirabeaj@gmail.com>  Fri, 15 Dec 2006 05:17:49 -0500
+libg15 (1.2.6-1) unstable; urgency=low
 
-libg15 (1.0-1) breezy; urgency=low
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Mon, 28 Jan 2008 07:58:11 +0100
+
+libg15 (1.2.5-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Wed, 09 Jan 2008 08:06:33 +0100
+
+libg15 (1.2.4-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Tue, 18 Dec 2007 08:08:43 +0100
+
+libg15 (1.2.3-1) unstable; urgency=low
+
+  * New upstrem version: add support of new g15 keyboards
+
+ -- Giacomo Catenazzi <cate@debian.org>  Thu, 15 Nov 2007 07:44:43 +0100
+
+libg15 (1.2.2-1) unstable; urgency=low
 
   * Initial release
 
- -- Anthony J. Mirabella <mirabeaj@gmail.com>  Sun, 24 Sep 2006 22:57:06 -0400
+ -- Giacomo Catenazzi <cate@debian.org>  Mon, 27 Aug 2007 07:56:10 +0200
 

debian/compat

@@ -1 +1 @@
-4
+5

debian/control

@@ -1,21 +1,28 @@
 Source: libg15
-Priority: optional
-Maintainer: Anthony J. Mirabella <mirabeaj@gmail.com>
-Build-Depends: debhelper (>= 4.0.0), autotools-dev, libusb-dev
-Standards-Version: 3.6.2
 Section: libs
+Priority: optional
+Maintainer: Giacomo Catenazzi <cate@debian.org>
+Build-Depends: cdbs, debhelper (>= 5), autotools-dev, libusb-dev
+Standards-Version: 3.8.1
+Homepage: http://www.g15tools.com/
 
-Package: libg15-dev
-Section: libdevel
-Architecture: any
-Depends: libg15 (= ${Source-Version})
-Description: Development packages for libg15
- Includes the files needed for developing software that uses libg15.
-
-Package: libg15
+Package: libg15-1
 Section: libs
 Architecture: any
 Depends: ${shlibs:Depends}, ${misc:Depends}
-Description: Library for interfacing with the Logitech G15 Keyboard
- Provides for low-level control of the lcd and extra keys on the 
- Logitech G15 keyboard.
+Description: Library for interfacing with the Logitech G15 keyboards
+ libg15 provides an API for low level control of the LCD display and
+ the extra keys on some Logitech keyboards (G11, G15)
+ .
+ This package contains the shared library and the runtime data.
+
+Package: libg15-dev
+Section: libdevel
+Depends: libg15-1 (= ${binary:Version}), ${misc:Depends}
+Architecture: any
+Description: Library for interfacing with the Logitech G15 keyboards
+ libg15 provides an API for low level control of the LCD display and
+ the extra keys on some Logitech keyboards (G11, G15).
+ .
+ This package contains the header files and the static library.
+

debian/copyright

@@ -1,12 +1,30 @@
-This package was debianized by Anthony J. Mirabella <mirabeaj@gmail.com> on
-Sun, 24 Sep 2006 22:57:06 -0400.
+This package was debianized by Giacomo A. Catenazzi <cate@debian.org> on
+Mon, 27 Aug 2007 07:56:10 +0200.
 
-It was downloaded from sourceforge.net
+It was downloaded from http://g15tools.sourceforge.net/
 
-Copyright Holders: Philip Lawatsch <philip@lawatsch.at>
-		   Alex Ibrado <alex@ibrado.org>
-		   Autotools support added by Anthony J. Mirabella <mirabeaj@gmail.com>
+Upstream Authors: 
+
+    Philip Lawatsch <philip@lawatsch.at>
+    Alex Ibrado <alex@ibrado.org>
+    Anthony J. Mirabella <mirabeaj@gmail.com>
+
+Copyright: 
+
+    Copyright (C) 2006,2007	Philip Lawatsch <philip@lawatsch.at>
+				Alex Ibrado <alex@ibrado.org>
+				Anthony J. Mirabella <mirabeaj@gmail.com>
 
 License:
 
-GPL
+    g15tools is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+License can be found in the file `/usr/share/common-licenses/GPL-2'.
+
+
+The Debian packaging is (C) 2007, Giacomo A. Catenazzi <cate@debian.org> and
+is licensed under the GPL v2 (or later), see `/usr/share/common-licenses/GPL-2'.
+

debian/libg15-1.install

@@ -0,0 +1 @@
+debian/tmp/usr/lib/lib*.so.* usr/lib/

debian/libg15-dev.install

@@ -1,6 +1,5 @@
-usr/include/*
-usr/lib/lib*.a
-usr/lib/lib*.so
-usr/lib/pkgconfig/*
-usr/lib/*.la
-usr/share/pkgconfig/*
+debian/tmp/usr/include/* usr/include/
+debian/tmp/usr/lib/lib*.a usr/lib/
+debian/tmp/usr/lib/lib*.so usr/lib/
+debian/tmp/usr/lib/*.la usr/lib/
+

debian/rules

@@ -1,115 +1,8 @@
 #!/usr/bin/make -f
-# -*- makefile -*-
-# Sample debian/rules that uses debhelper.
-# This file was originally written by Joey Hess and Craig Small.
-# As a special exception, when this file is copied by dh-make into a
-# dh-make output file, you may use that output file without restriction.
-# This special exception was added by Craig Small in version 0.37 of dh-make.
   
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
+DEB_DH_MAKESHLIBS_ARGS_libg15 := --version-info
 
+include /usr/share/cdbs/1/rules/debhelper.mk
+include /usr/share/cdbs/1/class/autotools.mk
 
-# These are used for cross-compiling and for saving the configure script
-# from having to guess our platform (since we know it already)
-DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-
-
-CFLAGS = -Wall -g
-
-ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-	CFLAGS += -O0
-else
-	CFLAGS += -O2
-endif
-
-# shared library versions, option 1
-version=1.0.0
-major=1
-# option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so
-#version=`ls src/.libs/lib*.so.* | \
-# awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'`
-#major=`ls src/.libs/lib*.so.* | \
-# awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'`
-
-config.status: configure
-	dh_testdir
-	# Add here commands to configure the package.
-	CFLAGS="$(CFLAGS) -Wl,-z,defs" ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
-
-
-build: build-stamp
-build-stamp:  config.status
-	dh_testdir
-
-	# Add here commands to compile the package.
-	$(MAKE)
-
-	touch build-stamp
-
-clean:
-	dh_testdir
-	dh_testroot
-	rm -f build-stamp 
-
-	# Add here commands to clean up after the build process.
-	-$(MAKE) distclean
-ifneq "$(wildcard /usr/share/misc/config.sub)" ""
-	cp -f /usr/share/misc/config.sub config.sub
-endif
-ifneq "$(wildcard /usr/share/misc/config.guess)" ""
-	cp -f /usr/share/misc/config.guess config.guess
-endif
-
-
-	dh_clean 
-
-install: build
-	dh_testdir
-	dh_testroot
-	dh_clean -k 
-	dh_installdirs -plibg15
-	dh_installdirs -plibg15-dev
-
-	# Add here commands to install the package into debian/tmp
-	$(MAKE) install DESTDIR=$(CURDIR)/debian/tmp
-
-
-# Build architecture-independent files here.
-binary-indep: build install
-# We have nothing to do by default.
-
-# Build architecture-dependent files here.
-binary-arch: build install
-	dh_testdir -a
-	dh_testroot -a
-	dh_installchangelogs ChangeLog -a
-	dh_installdocs -a
-	dh_installexamples -a
-	dh_install -a --sourcedir=debian/tmp
-	dh_installmenu -a
-	dh_installdebconf -a
-	dh_installlogrotate -a
-	dh_installemacsen -a
-	dh_installpam -a
-	dh_installmime -a
-	dh_installinit -a
-	dh_installcron -a
-	dh_installinfo -a
-	dh_installman -a
-	dh_link -a
-	dh_strip -a
-	dh_compress -a
-	dh_fixperms -a
-#	dh_perl -a
-#	dh_python -a
-	dh_makeshlibs -a
-	dh_installdeb -a
-	dh_shlibdeps -a
-	dh_gencontrol -a
-	dh_md5sums -a
-	dh_builddeb -a
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install 
+DEB_CONFIGURE_EXTRA_FLAGS = --quiet

debian/watch

@@ -0,0 +1,7 @@
+# See uscan(1) for format
+
+# Compulsory line, this is a version 3 file
+version=3
+
+http://sf.net/g15tools libg15-(.*)\.tar\.gz
+

libg15.c

@@ -17,7 +17,7 @@
 
     (c) 2006-2007 The G15tools Project - g15tools.sf.net
     
-    $Revision: 278 $ -  $Date: 2008-01-02 14:26:25 +1030 (Wed, 02 Jan 2008) $ $Author: mlampard $
+    $Revision: 292 $ -  $Date: 2008-11-11 08:51:25 -0500 (Tue, 11 Nov 2008) $ $Author: aneurysm9 $
 */
 
 #include <pthread.h>
@@ -45,7 +45,8 @@ const libg15_devices_t g15_devices[] = {
     DEVICE("Logitech G15",0x46d,0xc222,G15_LCD|G15_KEYS),
     DEVICE("Logitech G11",0x46d,0xc225,G15_KEYS),
     DEVICE("Logitech Z-10",0x46d,0x0a07,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED),
-    DEVICE("Logitech G15 v2",0x46d,0xc227,G15_LCD|G15_KEYS),
+    DEVICE("Logitech G15 v2",0x46d,0xc227,G15_LCD|G15_KEYS|G15_DEVICE_5BYTE_RETURN),
+    DEVICE("Logitech Gamepanel",0x46d,0xc251,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED),
     DEVICE(NULL,0,0,0)
 };
 
@@ -764,13 +765,13 @@ static void processKeyEvent5Byte(unsigned int *pressed_keys, unsigned char *buff
 
 int getPressedKeys(unsigned int *pressed_keys, unsigned int timeout)
 {
-    unsigned char buffer[9];
+    unsigned char buffer[G15_KEY_READ_LENGTH];
     int ret = 0;
 #ifdef LIBUSB_BLOCKS
-    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, 9, timeout);
+    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, G15_KEY_READ_LENGTH, timeout);
 #else
     pthread_mutex_lock(&libusb_mutex);
-    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, 9, timeout);
+    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, G15_KEY_READ_LENGTH, timeout);
     pthread_mutex_unlock(&libusb_mutex);
 #endif
     if(ret>0) {

libg15.h

@@ -17,7 +17,7 @@
     
     (c) 2006 - 2007 The G15tools Project - g15tools.sf.net
     
-    $Revision: 273 $ -  $Date: 2007-11-25 17:14:21 +1030 (Sun, 25 Nov 2007) $ $Author: mlampard $
+    $Revision: 292 $ -  $Date: 2008-11-11 08:51:25 -0500 (Tue, 11 Nov 2008) $ $Author: aneurysm9 $
 */
 
 #ifndef _LIBG15_H_
@@ -31,6 +31,9 @@ extern "C"
 #define G15_LCD 1
 #define G15_KEYS 2
 #define G15_DEVICE_IS_SHARED 4
+#define G15_DEVICE_5BYTE_RETURN 8
+
+#define G15_KEY_READ_LENGTH 9
 
 typedef struct libg15_devices_t libg15_devices_t;
 

rpm/libg15.spec

@@ -3,11 +3,11 @@
 %define prefix	/usr
 Summary: library to control logitech G15 keyboards
 Name: libg15
-Version: 1.2.5
+Version: 1.2.7
 Release: 1
 Copyright: GPL
 Group: Applications/System
-Source: http://prdownloads.sourceforge.net/g15tools/libg15-1.2.5.tar.bz2
+Source: http://prdownloads.sourceforge.net/g15tools/libg15-1.2.7.tar.bz2
 URL: http://sourceforge.net/projects/g15tools
 Distribution: Linux
 Vendor: NONE