Update the changelog

New maintainer
Update policy version to 4.3.0
2019-05-10 11:46:02 +02:00 · 2019-05-10 11:42:52 +02:00 · 2019-05-10 11:42:31 +02:00 · 2019-05-10 11:41:39 +02:00 · 2019-05-10 11:39:02 +02:00 · 2019-05-10 11:36:38 +02:00
26 changed files with 1439 additions and 668 deletions
@@ -42,3 +42,8 @@
  report any regressions.
 * Add Solaris detection and remove locks if detected.  Solaris' libUSB
  blocks on read, forcing mutexes causes writes to block too.
 1.2.6
 * Re-Add 5BYTE_RETURN flag. Auto-detect does not work with Solaris' libusb.
 * Add laptop GamePanel support.
 1.2.7
 * Fix keypress detection for G15v2 keyboards
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
 # @configure_input@
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -113,6 +113,7 @@ CXXFLAGS = @CXXFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
 DSYMUTIL = @DSYMUTIL@
 ECHO = @ECHO@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
@@ -135,6 +136,7 @@ LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
 NMEDIT = @NMEDIT@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
@@ -271,8 +273,8 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  if test -f $$p; then \
 	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
 	  else :; fi; \
 	done
@@ -280,8 +282,8 @@ uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
 	done
 clean-libLTLIBRARIES:
@@ -355,8 +357,8 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
@@ -368,8 +370,8 @@ TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
 	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
@@ -379,13 +381,12 @@ ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$tags$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$tags $$unique
@@ -442,6 +443,10 @@ dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 dist-lzma: distdir
 	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
 	$(am__remove_distdir)
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
@@ -468,6 +473,8 @@ distcheck: dist
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lzma*) \
 	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
@@ -623,8 +630,8 @@ uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES
 .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
 	clean-generic clean-libLTLIBRARIES clean-libtool ctags dist \
-	dist-all dist-bzip2 dist-gzip dist-hook dist-shar dist-tarZ \
+	dist-all dist-bzip2 dist-gzip dist-hook dist-lzma dist-shar \
-	dist-zip distcheck distclean distclean-compile \
+	dist-tarZ dist-zip distcheck distclean distclean-compile \
 	distclean-generic distclean-hdr distclean-libtool \
 	distclean-tags distcleancheck distdir distuninstallcheck dvi \
 	dvi-am html html-am info info-am install install-am \
@@ -6,3 +6,4 @@ LibG15 currently supports LCD & keys on the following devices:
 - G11 keyboard
 - Z10 speakers
 - 2nd revision of the G15 (amber backlight, 6 'G' keys, LCD)
 - Gamepanel available on some laptops
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10 -*- Autoconf -*-
+# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,14 +11,17 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
-m4_if(m4_PACKAGE_VERSION, [2.61],,
+m4_ifndef([AC_AUTOCONF_VERSION],
-[m4_fatal([this file was generated for autoconf 2.61.
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-You have another version of autoconf.  If you want to use that,
+m4_if(AC_AUTOCONF_VERSION, [2.61],,
-you should regenerate the build system entirely.], [63])])
+[m4_warning([this file was generated for autoconf 2.61.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-# serial 51 AC_PROG_LIBTOOL
+# serial 52 AC_PROG_LIBTOOL
 # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
@@ -106,7 +109,6 @@ AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
 AC_REQUIRE([AC_OBJEXT])dnl
 AC_REQUIRE([AC_EXEEXT])dnl
 dnl
 AC_LIBTOOL_SYS_MAX_CMD_LEN
 AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
 AC_LIBTOOL_OBJDIR
@@ -208,6 +210,8 @@ file_magic*)
  ;;
 esac
 _LT_REQUIRED_DARWIN_CHECKS
 AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
 AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
 enable_win32_dll=yes, enable_win32_dll=no)
@@ -224,6 +228,14 @@ AC_ARG_WITH([pic],
    [pic_mode=default])
 test -z "$pic_mode" && pic_mode=default
 # Check if we have a version mismatch between libtool.m4 and ltmain.sh.
 #
 # Note:  This should be in AC_LIBTOOL_SETUP, _after_ $ltmain have been defined.
 #        We also should do it _before_ AC_LIBTOOL_LANG_C_CONFIG that actually
 #        calls AC_LIBTOOL_CONFIG and creates libtool.
 #
 _LT_VERSION_CHECK
 # Use C for the default configuration in the libtool script
 tagname=
 AC_LIBTOOL_LANG_C_CONFIG
@@ -231,6 +243,41 @@ _LT_AC_TAGCONFIG
 ])# AC_LIBTOOL_SETUP
 # _LT_VERSION_CHECK
 # -----------------
 AC_DEFUN([_LT_VERSION_CHECK],
 [AC_MSG_CHECKING([for correct ltmain.sh version])
 if test "x$ltmain" = "x" ; then
  AC_MSG_RESULT(no)
  AC_MSG_ERROR([
 *** @<:@Gentoo@:>@ sanity check failed! ***
 *** \$ltmain is not defined, please check the patch for consistency! ***
 ])
 fi
 gentoo_lt_version="1.5.26"
 gentoo_ltmain_version=`sed -n '/^[[ 	]]*VERSION=/{s/^[[ 	]]*VERSION=//;p;q;}' "$ltmain"`
 if test "x$gentoo_lt_version" != "x$gentoo_ltmain_version" ; then
  AC_MSG_RESULT(no)
  AC_MSG_ERROR([
 *** @<:@Gentoo@:>@ sanity check failed! ***
 *** libtool.m4 and ltmain.sh have a version mismatch! ***
 *** (libtool.m4 = $gentoo_lt_version, ltmain.sh = $gentoo_ltmain_version) ***
 Please run:
  libtoolize --copy --force
 if appropriate, please contact the maintainer of this
 package (or your distribution) for help.
 ])
 else
  AC_MSG_RESULT(yes)
 fi
 ])# _LT_VERSION_CHECK
 # _LT_AC_SYS_COMPILER
 # -------------------
 AC_DEFUN([_LT_AC_SYS_COMPILER],
@@ -287,9 +334,80 @@ ac_outfile=conftest.$ac_objext
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$rm -r conftest*
 ])# _LT_LINKER_BOILERPLATE
 # _LT_REQUIRED_DARWIN_CHECKS
 # --------------------------
 # Check for some things on darwin
 AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
  case $host_os in
    rhapsody* | darwin*)
    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
      [lt_cv_apple_cc_single_mod=no
      if test -z "${LT_MULTI_MODULE}"; then
   # By default we will add the -single_module flag. You can override
   # by either setting the environment variable LT_MULTI_MODULE
   # non-empty at configure time, or by adding -multi_module to the
   # link flags.
   echo "int foo(void){return 1;}" > conftest.c
   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
     -dynamiclib ${wl}-single_module conftest.c
   if test -f libconftest.dylib; then
     lt_cv_apple_cc_single_mod=yes
     rm -rf libconftest.dylib*
   fi
   rm conftest.c
      fi])
    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
      [lt_cv_ld_exported_symbols_list],
      [lt_cv_ld_exported_symbols_list=no
      save_LDFLAGS=$LDFLAGS
      echo "_main" > conftest.sym
      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
   [lt_cv_ld_exported_symbols_list=yes],
   [lt_cv_ld_exported_symbols_list=no])
   LDFLAGS="$save_LDFLAGS"
    ])
    case $host_os in
    rhapsody* | darwin1.[[0123]])
      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
    darwin1.*)
     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
    darwin*)
      # if running on 10.5 or later, the deployment target defaults
      # to the OS version, if on x86, and 10.4, the deployment
      # target defaults to 10.4. Don't you love it?
      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
   10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
   10.[[012]]*)
     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
   10.*)
     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
      esac
    ;;
  esac
    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
      _lt_dar_single_mod='$single_module'
    fi
    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
    else
      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
    fi
    if test "$DSYMUTIL" != ":"; then
      _lt_dsymutil="~$DSYMUTIL \$lib || :"
    else
      _lt_dsymutil=
    fi
    ;;
  esac
 ])
 # _LT_AC_SYS_LIBPATH_AIX
 # ----------------------
@@ -614,7 +732,11 @@ sparc*-*solaris*)
    *64-bit*)
      case $lt_cv_prog_gnu_ld in
      yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)    LD="${LD-ld} -64" ;;
+      *)
        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
 	  LD="${LD-ld} -64"
 	fi
 	;;
      esac
      ;;
    esac
@@ -707,7 +829,7 @@ AC_CACHE_CHECK([$1], [$2],
       $2=yes
     fi
   fi
-   $rm conftest*
+   $rm -r conftest*
   LDFLAGS="$save_LDFLAGS"
 ])
@@ -978,7 +1100,7 @@ else
    AC_CHECK_FUNC([shl_load],
 	  [lt_cv_dlopen="shl_load"],
      [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
 	[AC_CHECK_FUNC([dlopen],
 	      [lt_cv_dlopen="dlopen"],
 	  [AC_CHECK_LIB([dl], [dlopen],
@@ -986,7 +1108,7 @@ else
 	    [AC_CHECK_LIB([svld], [dlopen],
 		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
 	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
 	      ])
 	    ])
 	  ])
@@ -1303,7 +1425,7 @@ aix3*)
  soname_spec='${libname}${release}${shared_ext}$major'
  ;;
-aix4* | aix5*)
+aix[[4-9]]*)
  version_type=linux
  need_lib_prefix=no
  need_version=no
@@ -1471,7 +1593,14 @@ freebsd* | dragonfly*)
    *) objformat=elf ;;
    esac
  fi
-  version_type=freebsd-$objformat
+  # Handle Gentoo/FreeBSD as it was Linux
  case $host_vendor in
    gentoo)
      version_type=linux ;;
    *)
      version_type=freebsd-$objformat ;;
  esac
  case $version_type in
    freebsd-elf*)
      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
@@ -1482,6 +1611,12 @@ freebsd* | dragonfly*)
      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
      need_version=yes
      ;;
    linux)
      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
      soname_spec='${libname}${release}${shared_ext}$major'
      need_lib_prefix=no
      need_version=no
      ;;
  esac
  shlibpath_var=LD_LIBRARY_PATH
  case $host_os in
@@ -1629,27 +1764,10 @@ linux* | k*bsd*-gnu)
  # before this can be enabled.
  hardcode_into_libs=yes
  # find out which ABI we are using
  libsuff=
  case "$host_cpu" in
  x86_64*|s390x*|powerpc64*)
    echo '[#]line __oline__ "configure"' > conftest.$ac_ext
    if AC_TRY_EVAL(ac_compile); then
      case `/usr/bin/file conftest.$ac_objext` in
      *64-bit*)
        libsuff=64
        sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
        ;;
      esac
    fi
    rm -rf conftest*
    ;;
  esac
  # Append ld.so.conf contents to the search path
  if test -f /etc/ld.so.conf; then
    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
  fi
  # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -1841,6 +1959,13 @@ esac
 AC_MSG_RESULT([$dynamic_linker])
 test "$dynamic_linker" = no && can_build_shared=no
 AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
 [lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
 sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
 AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
 [lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
 sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
@@ -2340,7 +2465,7 @@ lt_cv_deplibs_check_method='unknown'
 # whether `pass_all' will *always* work, you probably want this one.
 case $host_os in
-aix4* | aix5*)
+aix[[4-9]]*)
  lt_cv_deplibs_check_method=pass_all
  ;;
@@ -2776,7 +2901,7 @@ aix3*)
  fi
  ;;
-aix4* | aix5*)
+aix[[4-9]]*)
  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
    test "$enable_shared" = yes && enable_static=no
  fi
@@ -2833,6 +2958,7 @@ _LT_AC_TAGVAR(postdep_objects, $1)=
 _LT_AC_TAGVAR(predeps, $1)=
 _LT_AC_TAGVAR(postdeps, $1)=
 _LT_AC_TAGVAR(compiler_lib_search_path, $1)=
 _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
 # Source file extension for C++ test sources.
 ac_ext=cpp
@@ -2942,7 +3068,7 @@ case $host_os in
    # FIXME: insert proper C++ library support
    _LT_AC_TAGVAR(ld_shlibs, $1)=no
    ;;
-  aix4* | aix5*)
+  aix[[4-9]]*)
    if test "$host_cpu" = ia64; then
      # On IA64, the linker does run time linking by default, so we don't
      # have to do anything special.
@@ -2955,7 +3081,7 @@ case $host_os in
      # Test if we are trying to use run time linking or normal
      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
      # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	for ld_flag in $LDFLAGS; do
 	  case $ld_flag in
 	  *-brtl*)
@@ -3101,51 +3227,23 @@ case $host_os in
    fi
  ;;
      darwin* | rhapsody*)
        case $host_os in
        rhapsody* | darwin1.[[012]])
         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
         ;;
       *) # Darwin 1.3 on
         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
         else
           case ${MACOSX_DEPLOYMENT_TARGET} in
             10.[[012]])
               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
               ;;
             10.*)
               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
               ;;
           esac
         fi
         ;;
        esac
      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
      _LT_AC_TAGVAR(hardcode_direct, $1)=no
      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
      if test "$GXX" = yes ; then
      lt_int_apple_cc_single_mod=no
      output_verbose_link_cmd='echo'
-      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
+      _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-       lt_int_apple_cc_single_mod=yes
+      _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
      _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
      fi
      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
      else
          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
        fi
        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
          else
            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
          fi
            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
      else
      case $cc_basename in
        xlc*)
@@ -3396,7 +3494,7 @@ case $host_os in
 	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 	;;
-      pgCC*)
+      pgCC* | pgcpp*)
        # Portland Group C++ compiler
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
@@ -3831,7 +3929,8 @@ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
 # compiler output when linking a shared library.
 # Parse the compiler output and extract the necessary
 # objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
 [AC_REQUIRE([LT_AC_PROG_SED])dnl
 dnl we can't use the lt_simple_compile_test_code here,
 dnl because it contains code intended for an executable,
 dnl not a library.  It's possible we should let each
@@ -3956,6 +4055,11 @@ fi
 $rm -f confest.$objext
 _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
 if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
  _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
 fi
 # PORTME: override above test on systems where it is broken
 ifelse([$1],[CXX],
 [case $host_os in
@@ -4012,7 +4116,6 @@ solaris*)
  ;;
 esac
 ])
 case " $_LT_AC_TAGVAR(postdeps, $1) " in
 *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
 esac
@@ -4097,7 +4200,7 @@ aix3*)
    postinstall_cmds='$RANLIB $lib'
  fi
  ;;
-aix4* | aix5*)
+aix[[4-9]]*)
  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
    test "$enable_shared" = yes && enable_static=no
  fi
@@ -4162,7 +4265,6 @@ CC=${GCJ-"gcj"}
 compiler=$CC
 _LT_AC_TAGVAR(compiler, $1)=$CC
 _LT_CC_BASENAME([$compiler])
 _LT_AC_TAGVAR(LD, $1)="$LD"
 # GCJ did not exist at the time GCC didn't implicitly link libc in.
 _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
@@ -4275,6 +4377,7 @@ if test -f "$ltmain"; then
    _LT_AC_TAGVAR(predeps, $1) \
    _LT_AC_TAGVAR(postdeps, $1) \
    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
    _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
    _LT_AC_TAGVAR(archive_cmds, $1) \
    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
    _LT_AC_TAGVAR(postinstall_cmds, $1) \
@@ -4337,7 +4440,7 @@ ifelse([$1], [],
 # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
 # Free Software Foundation, Inc.
 #
 # This file is part of GNU Libtool:
@@ -4427,9 +4530,6 @@ CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
 # Is the compiler the GNU C compiler?
 with_gcc=$_LT_AC_TAGVAR(GCC, $1)
 gcc_dir=\`gcc -print-file-name=. | $SED 's,/\.$,,'\`
 gcc_ver=\`gcc -dumpversion\`
 # An ERE matcher.
 EGREP=$lt_EGREP
@@ -4563,11 +4663,11 @@ striplib=$lt_striplib
 # Dependencies to place before the objects being linked to create a
 # shared library.
-predep_objects=\`echo $lt_[]_LT_AC_TAGVAR(predep_objects, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\`
+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
 # Dependencies to place after the objects being linked to create a
 # shared library.
-postdep_objects=\`echo $lt_[]_LT_AC_TAGVAR(postdep_objects, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\`
+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
 # Dependencies to place before the objects being linked to create a
 # shared library.
@@ -4577,9 +4677,13 @@ predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
 # shared library.
 postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
 # The directories searched by this compiler when creating a shared
 # library
 compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
 # The library search path used internally by the compiler when linking
 # a shared library.
-compiler_lib_search_path=\`echo $lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\`
+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
 # Method to check whether dependent libraries are shared objects.
 deplibs_check_method=$lt_deplibs_check_method
@@ -4659,7 +4763,7 @@ variables_saved_for_relink="$variables_saved_for_relink"
 link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
 # Compile-time system search path for libraries
-sys_lib_search_path_spec=\`echo $lt_sys_lib_search_path_spec | \$SED -e "s@\${gcc_dir}@\\\${gcc_dir}@g;s@\${gcc_ver}@\\\${gcc_ver}@g"\`
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 # Run-time system search path for libraries
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
@@ -4926,7 +5030,7 @@ EOF
    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
    cat conftest.$ac_ext >&5
  fi
-  rm -f conftest* conftst*
+  rm -rf conftest* conftst*
  # Do not use the global_symbol_pipe unless it works.
  if test "$pipe_works" = yes; then
@@ -4983,7 +5087,8 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
      # built for inclusion in a dll (and should export symbols for example).
      # Although the cygwin gcc ignores -fPIC, still need this for old-style
      # (--disable-auto-import) libraries
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      m4_if([$1], [GCJ], [],
 	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
      ;;
    darwin* | rhapsody*)
      # PIC is the default on this platform
@@ -5020,7 +5125,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
    esac
  else
    case $host_os in
-      aix4* | aix5*)
+      aix[[4-9]]*)
 	# All AIX code is PIC.
 	if test "$host_cpu" = ia64; then
 	  # AIX 5 now supports IA64 processor
@@ -5116,7 +5221,7 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
 	    ;;
-	  pgCC*)
+	  pgCC* | pgcpp*)
 	    # Portland Group C++ compiler.
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
@@ -5267,7 +5372,8 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
      # built for inclusion in a dll (and should export symbols for example).
      # Although the cygwin gcc ignores -fPIC, still need this for old-style
      # (--disable-auto-import) libraries
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      m4_if([$1], [GCJ], [],
 	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
      ;;
    darwin* | rhapsody*)
@@ -5337,7 +5443,8 @@ AC_MSG_CHECKING([for $compiler option to produce PIC])
    mingw* | cygwin* | pw32* | os2*)
      # This hack is so that the source file can tell whether it is being
      # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      m4_if([$1], [GCJ], [],
 	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
      ;;
    hpux9* | hpux10* | hpux11*)
@@ -5474,7 +5581,7 @@ AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
 #
 if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
+    _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
     "" | " "*) ;;
@@ -5498,7 +5605,7 @@ esac
 #
 wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
 AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+  _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
  $lt_tmp_static_flag,
  [],
  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
@@ -5514,7 +5621,7 @@ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
 ifelse([$1],[CXX],[
  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
  case $host_os in
-  aix4* | aix5*)
+  aix[[4-9]]*)
    # If we're using GNU nm, then we don't want the "-C" option.
    # -C means demangle to AIX nm, but means don't demangle with GNU nm
    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
@@ -5533,6 +5640,7 @@ ifelse([$1],[CXX],[
    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
  ;;
  esac
  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
 ],[
  runpath_var=
  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
@@ -5563,12 +5671,14 @@ ifelse([$1],[CXX],[
  # it will be wrapped by ` (' and `)$', so one must not match beginning or
  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
  # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
  # platforms (ab)use it in PIC code, but their linkers get confused if
  # the symbol is explicitly referenced.  Since portable code cannot
  # rely on this symbol name, it's probably fine to never include it in
  # preloaded symbol tables.
  # Exclude shared library initialization/finalization symbols.
 dnl Note also adjust exclude_expsyms for C++ above.
  extract_expsyms_cmds=
  # Just being paranoid about ensuring that cc_basename is set.
  _LT_CC_BASENAME([$compiler])
@@ -5618,7 +5728,7 @@ ifelse([$1],[CXX],[
    # See if GNU ld supports shared libraries.
    case $host_os in
-    aix3* | aix4* | aix5*)
+    aix[[3-9]]*)
      # On AIX/PPC, the GNU linker is very broken
      if test "$host_cpu" != ia64; then
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -5837,7 +5947,7 @@ _LT_EOF
      fi
      ;;
-    aix4* | aix5*)
+    aix[[4-9]]*)
      if test "$host_cpu" = ia64; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
@@ -5857,7 +5967,7 @@ _LT_EOF
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
 	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	  for ld_flag in $LDFLAGS; do
  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
  	    aix_use_runtimelinking=yes
@@ -6017,11 +6127,10 @@ _LT_EOF
      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
    if test "$GCC" = yes ; then
    	output_verbose_link_cmd='echo'
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+        _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+        _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
    else
      case $cc_basename in
        xlc*)
@@ -6602,7 +6711,7 @@ AC_SUBST([SED])
 AC_MSG_RESULT([$SED])
 ])
-# Copyright (C) 2002, 2003, 2005, 2006  Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006, 2007  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -6617,7 +6726,7 @@ AC_DEFUN([AM_AUTOMAKE_VERSION],
 [am__api_version='1.10'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.10], [],
+m4_if([$1], [1.10.1], [],
      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
@@ -6633,8 +6742,10 @@ m4_define([_AM_AUTOCONF_VERSION], [])
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10])dnl
+[AM_AUTOMAKE_VERSION([1.10.1])dnl
-_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
+m4_ifndef([AC_AUTOCONF_VERSION],
  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 _AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
@@ -6906,7 +7017,7 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
  # each Makefile.in and add a new line on top of each file to say so.
  # Grep'ing the whole file is not good either: AIX grep has a line
  # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
    dirpart=`AS_DIRNAME("$mf")`
  else
    continue
@@ -6954,13 +7065,13 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
 # Do all the work for Automake.                             -*- Autoconf -*-
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
+# 2005, 2006, 2008 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
-# serial 12
+# serial 13
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
@@ -7065,16 +7176,17 @@ AC_PROVIDE_IFELSE([AC_PROG_OBJC],
 # our stamp files there.
 AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
 [# Compute $1's index in $config_headers.
 _am_arg=$1
 _am_stamp_count=1
 for _am_header in $config_headers :; do
  case $_am_header in
-    $1 | $1:* )
+    $_am_arg | $_am_arg:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
 done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 # Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
 #
@@ -7346,7 +7458,7 @@ AC_SUBST([INSTALL_STRIP_PROGRAM])])
 # _AM_SUBST_NOTMAKE(VARIABLE)
 # ---------------------------
-# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
 # This macro is traced by Automake.
 AC_DEFUN([_AM_SUBST_NOTMAKE])
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-#   Inc.
+#   Free Software Foundation, Inc.
-timestamp='2007-05-17'
+timestamp='2008-01-23'
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -56,8 +56,8 @@ version="\
 GNU config.guess ($timestamp)
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -139,6 +139,23 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 if [ "${UNAME_SYSTEM}" = "Linux" ] ; then
 	eval $set_cc_for_build
 	cat << EOF > $dummy.c
 	#include <features.h>
 	#ifdef __UCLIBC__
 	# ifdef __UCLIBC_CONFIG_VERSION__
 	LIBC=uclibc __UCLIBC_CONFIG_VERSION__
 	# else
 	LIBC=uclibc
 	# endif
 	#else
 	LIBC=gnu
 	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep LIBC= | sed -e 's: ::g'`
 fi
 # Note: order is significant - the case branches are not exclusive.
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -330,7 +347,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
-    i86pc:SunOS:5.*:* | ix86xen:SunOS:5.*:*)
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
    sun4*:SunOS:6*:*)
@@ -532,7 +549,7 @@ EOF
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[45])
+    *:AIX:*:[456])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -799,6 +816,9 @@ EOF
 	    EM64T | authenticamd)
 		echo x86_64-unknown-interix${UNAME_RELEASE}
 		exit ;;
 	    IA64)
 		echo ia64-unknown-interix${UNAME_RELEASE}
 		exit ;;
 	esac ;;
    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
@@ -833,28 +853,35 @@ EOF
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
    arm*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	eval $set_cc_for_build
 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
 	    | grep -q __ARM_EABI__
 	then
 	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	else
 	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
 	fi
 	exit ;;
    avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
    cris:Linux:*:*)
-	echo cris-axis-linux-gnu
+	echo cris-axis-linux-${LIBC}
 	exit ;;
    crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
+	echo crisv32-axis-linux-${LIBC}
 	exit ;;
    frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
+    	echo frv-unknown-linux-${LIBC}
 	exit ;;
    ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
    m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
    m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
    mips:Linux:*:*)
 	eval $set_cc_for_build
@@ -877,7 +904,7 @@ EOF
 		s: ::g
 		p
 	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
    mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -900,16 +927,16 @@ EOF
 		s: ::g
 		p
 	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
    or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
+	echo or32-unknown-linux-${LIBC}
 	exit ;;
    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
+	echo powerpc-unknown-linux-${LIBC}
 	exit ;;
    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
+	echo powerpc64-unknown-linux-${LIBC}
 	exit ;;
    alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
@@ -922,40 +949,40 @@ EOF
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
        esac
 	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
    parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
 	esac
 	exit ;;
    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
+	echo hppa64-unknown-linux-${LIBC}
 	exit ;;
    s390:Linux:*:* | s390x:Linux:*:*)
 	echo ${UNAME_MACHINE}-ibm-linux
 	exit ;;
    sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+    	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
    sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
    sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
    vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
 	exit ;;
    x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
+	echo x86_64-unknown-linux-${LIBC}
 	exit ;;
-    xtensa:Linux:*:*)
+    xtensa*:Linux:*:*)
-    	echo xtensa-unknown-linux-gnu
+    	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
    i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
@@ -970,20 +997,22 @@ EOF
 				    p'`
        case "$ld_supported_targets" in
 	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-${LIBC}"
 		;;
 	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}aout"
 		exit ;;
 	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}coff"
 		exit ;;
 	  "")
 		# Either a pre-BFD a.out linker (linux-gnuoldld) or
 		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}oldld"
 		exit ;;
 	esac
 	# This should get integrated into the C code below, but now we hack
 	if [ "$LIBC" != "gnu" ] ; then echo "$TENTATIVE" && exit 0 ; fi
 	# Determine whether the default compiler is a.out or elf
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -1474,9 +1503,9 @@ This script, last modified $timestamp, has failed to recognize
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 and
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-#   Inc.
+#   Free Software Foundation, Inc.
-timestamp='2007-04-29'
+timestamp='2008-01-16'
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -72,8 +72,8 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -244,7 +244,7 @@ case $basic_machine in
 	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
 	| bfin \
 	| c4x | clipper \
-	| d10v | d30v | dlx | dsp16xx \
+	| d10v | d30v | dlx | dsp16xx | dvp \
 	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
@@ -277,7 +277,7 @@ case $basic_machine in
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
 	| score \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[24]a*eb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -358,7 +358,7 @@ case $basic_machine in
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]a*eb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
@@ -369,10 +369,14 @@ case $basic_machine in
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
 	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
-	| xstormy16-* | xtensa-* \
+	| xstormy16-* | xtensa*-* \
 	| ymp-* \
 	| z8k-*)
 		;;
 	# Recognize the basic CPU types without company name, with glob match.
 	xtensa*)
 		basic_machine=$basic_machine-unknown
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
 	386bsd)
@@ -443,6 +447,14 @@ case $basic_machine in
 		basic_machine=ns32k-sequent
 		os=-dynix
 		;;
 	blackfin)
 		basic_machine=bfin-unknown
 		os=-linux
 		;;
 	blackfin-*)
 		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
 		os=-linux
 		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
@@ -475,8 +487,8 @@ case $basic_machine in
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16c)
+	cr16)
-		basic_machine=cr16c-unknown
+		basic_machine=cr16-unknown
 		os=-elf
 		;;
 	crds | unos)
@@ -668,6 +680,14 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
 	m68knommu)
 		basic_machine=m68k-unknown
 		os=-linux
 		;;
 	m68knommu-*)
 		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
 		os=-linux
 		;;
 	m88k-omron*)
 		basic_machine=m88k-omron
 		;;
@@ -694,6 +714,24 @@ case $basic_machine in
 		basic_machine=m68k-atari
 		os=-mint
 		;;
 	mipsEE* | ee | ps2)
 		basic_machine=mips64r5900el-scei
 		case $os in
 		    -linux*)
 			;;
 		    *)
 			os=-elf
 			;;
 		esac
 		;;
 	iop)
 		basic_machine=mipsel-scei
 		os=-irx
 		;;
 	dvp)
 		basic_machine=dvp-scei
 		os=-elf
 		;;
 	mips3*-*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
 		;;
@@ -813,6 +851,14 @@ case $basic_machine in
 		basic_machine=i860-intel
 		os=-osf
 		;;
 	parisc)
 		basic_machine=hppa-unknown
 		os=-linux
 		;;
 	parisc-*)
 		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
 		os=-linux
 		;;
 	pbd)
 		basic_machine=sparc-tti
 		;;
@@ -1021,6 +1067,10 @@ case $basic_machine in
 		basic_machine=tic6x-unknown
 		os=-coff
 		;;
 	tile*)
 		basic_machine=tile-unknown
 		os=-linux-gnu
 		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -1226,7 +1276,7 @@ case $os in
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -irx*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1,9 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
-scriptversion=2006-10-15.18
+scriptversion=2007-03-29.01
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
 # Foundation, Inc.
 # This program is free software; you can redistribute it and/or modify
@@ -215,34 +215,39 @@ aix)
  # current directory.  Also, the AIX compiler puts `$object:' at the
  # start of each line; $object doesn't have directory information.
  # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  tmpdepfile="$stripped.u"
+  test "x$dir" = "x$object" && dir=
  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
  if test "$libtool" = yes; then
    tmpdepfile1=$dir$base.u
    tmpdepfile2=$base.u
    tmpdepfile3=$dir.libs/$base.u
    "$@" -Wc,-M
  else
    tmpdepfile1=$dir$base.u
    tmpdepfile2=$dir$base.u
    tmpdepfile3=$dir$base.u
    "$@" -M
  fi
  stat=$?
  if test -f "$tmpdepfile"; then :
  else
    stripped=`echo "$stripped" | sed 's,^.*/,,'`
    tmpdepfile="$stripped.u"
  fi
  if test $stat -eq 0; then :
  else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
    exit $stat
  fi
  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
  do
    test -f "$tmpdepfile" && break
  done
  if test -f "$tmpdepfile"; then
    outname="$stripped.o"
    # Each line is of the form `foo.o: dependent.h'.
    # Do two passes, one to just change these to
    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    # That's a tab and a space in the [].
    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
  else
    # The sourcefile does not contain any dependencies, so just
    # store a dummy comment line, to avoid errors with the Makefile
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
-scriptversion=2006-10-14.15
+scriptversion=2006-12-25.00
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -48,7 +48,7 @@ IFS=" ""	$nl"
 # set DOITPROG to echo to test this script
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
 if test -z "$doit"; then
  doit_exec=exec
 else
@@ -58,34 +58,49 @@ fi
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
-mvprog="${MVPROG-mv}"
+chgrpprog=${CHGRPPROG-chgrp}
-cpprog="${CPPROG-cp}"
+chmodprog=${CHMODPROG-chmod}
-chmodprog="${CHMODPROG-chmod}"
+chownprog=${CHOWNPROG-chown}
-chownprog="${CHOWNPROG-chown}"
+cmpprog=${CMPPROG-cmp}
-chgrpprog="${CHGRPPROG-chgrp}"
+cpprog=${CPPROG-cp}
-stripprog="${STRIPPROG-strip}"
+mkdirprog=${MKDIRPROG-mkdir}
-rmprog="${RMPROG-rm}"
+mvprog=${MVPROG-mv}
-mkdirprog="${MKDIRPROG-mkdir}"
+rmprog=${RMPROG-rm}
 stripprog=${STRIPPROG-strip}
 posix_glob='?'
 initialize_posix_glob='
  test "$posix_glob" != "?" || {
    if (set -f) 2>/dev/null; then
      posix_glob=
    else
      posix_glob=:
    fi
  }
 '
 posix_glob=
 posix_mkdir=
 # Desired mode of installed file.
 mode=0755
 chgrpcmd=
 chmodcmd=$chmodprog
 chowncmd=
-chgrpcmd=
+mvcmd=$mvprog
 stripcmd=
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
 src=
 dst=
 dir_arg=
-dstarg=
+dst_arg=
 copy_on_change=false
 no_target_directory=
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
 Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
   or: $0 [OPTION]... SRCFILES... DIRECTORY
   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
   or: $0 [OPTION]... -d DIRECTORIES...
@@ -95,65 +110,55 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
 In the 4th, create DIRECTORIES.
 Options:
-c         (ignored)
+     --help     display this help and exit.
-d         create directories instead of installing files.
+     --version  display version info and exit.
-g GROUP   $chgrpprog installed files to GROUP.
+
-m MODE    $chmodprog installed files to MODE.
+  -c            (ignored)
-o USER    $chownprog installed files to USER.
+  -C            install only if different (preserve the last data modification time)
-s         $stripprog installed files.
+  -d            create directories instead of installing files.
-t DIRECTORY  install into DIRECTORY.
+  -g GROUP      $chgrpprog installed files to GROUP.
-T         report an error if DSTFILE is a directory.
+  -m MODE       $chmodprog installed files to MODE.
--help     display this help and exit.
+  -o USER       $chownprog installed files to USER.
--version  display version info and exit.
+  -s            $stripprog installed files.
  -t DIRECTORY  install into DIRECTORY.
  -T            report an error if DSTFILE is a directory.
 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
  RMPROG STRIPPROG
 "
 while test $# -ne 0; do
  case $1 in
-    -c) shift
+    -c) ;;
        continue;;
-    -d) dir_arg=true
+    -C) copy_on_change=true;;
-        shift
+
-        continue;;
+    -d) dir_arg=true;;
    -g) chgrpcmd="$chgrpprog $2"
-        shift
+	shift;;
        shift
        continue;;
    --help) echo "$usage"; exit $?;;
    -m) mode=$2
        shift
        shift
 	case $mode in
 	  *' '* | *'	'* | *'
 '*	  | *'*'* | *'?'* | *'['*)
 	    echo "$0: invalid mode: $mode" >&2
 	    exit 1;;
 	esac
-        continue;;
+	shift;;
    -o) chowncmd="$chownprog $2"
-        shift
+	shift;;
        shift
        continue;;
-    -s) stripcmd=$stripprog
+    -s) stripcmd=$stripprog;;
        shift
        continue;;
-    -t) dstarg=$2
+    -t) dst_arg=$2
-	shift
+	shift;;
 	shift
 	continue;;
-    -T) no_target_directory=true
+    -T) no_target_directory=true;;
 	shift
 	continue;;
    --version) echo "$0 $scriptversion"; exit $?;;
@@ -165,21 +170,22 @@ while test $# -ne 0; do
    *)  break;;
  esac
  shift
 done
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
  # When -d is used, all remaining arguments are directories to create.
  # When -t is used, the destination is already specified.
  # Otherwise, the last argument is the destination.  Remove it from $@.
  for arg
  do
-    if test -n "$dstarg"; then
+    if test -n "$dst_arg"; then
      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dstarg"
+      set fnord "$@" "$dst_arg"
      shift # fnord
    fi
    shift # arg
-    dstarg=$arg
+    dst_arg=$arg
  done
 fi
@@ -224,7 +230,7 @@ for src
 do
  # Protect names starting with `-'.
  case $src in
-    -*) src=./$src ;;
+    -*) src=./$src;;
  esac
  if test -n "$dir_arg"; then
@@ -242,22 +248,22 @@ do
      exit 1
    fi
-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
      echo "$0: no destination specified." >&2
      exit 1
    fi
-    dst=$dstarg
+    dst=$dst_arg
    # Protect names starting with `-'.
    case $dst in
-      -*) dst=./$dst ;;
+      -*) dst=./$dst;;
    esac
    # If destination is a directory, append the input filename; won't work
    # if double slashes aren't ignored.
    if test -d "$dst"; then
      if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
+	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
      fi
      dstdir=$dst
@@ -378,26 +384,19 @@ do
      # directory the slow way, step by step, checking for races as we go.
      case $dstdir in
-	/*) prefix=/ ;;
+	/*) prefix='/';;
-	-*) prefix=./ ;;
+	-*) prefix='./';;
-	*)  prefix= ;;
+	*)  prefix='';;
      esac
-      case $posix_glob in
+      eval "$initialize_posix_glob"
        '')
 	  if (set -f) 2>/dev/null; then
 	    posix_glob=true
 	  else
 	    posix_glob=false
 	  fi ;;
      esac
      oIFS=$IFS
      IFS=/
-      $posix_glob && set -f
+      $posix_glob set -f
      set fnord $dstdir
      shift
-      $posix_glob && set +f
+      $posix_glob set +f
      IFS=$oIFS
      prefixes=
@@ -459,41 +458,54 @@ do
    # ignore errors from any of these, just make sure not to ignore
    # errors from the above "$doit $cpprog $src $dsttmp" command.
    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-      && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
    # If -C, don't bother to copy if it wouldn't change the file.
    if $copy_on_change &&
       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
       eval "$initialize_posix_glob" &&
       $posix_glob set -f &&
       set X $old && old=:$2:$4:$5:$6 &&
       set X $new && new=:$2:$4:$5:$6 &&
       $posix_glob set +f &&
       test "$old" = "$new" &&
       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
    then
      rm -f "$dsttmp"
    else
      # Rename the file to the real destination.
      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
    # Now rename the file to the real destination.
    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
      || {
      # The rename failed, perhaps because mv can't rename something else
      # to itself, or perhaps because mv is so ancient that it does not
      # support -f.
-
+      {
 	# Now remove or move aside any old file at destination location.
 	# We try this two ways since rm can't unlink itself on some
 	# systems and the destination file might be busy for other
 	# reasons.  In this case, the final cleanup might fail but the new
 	# file should still install successfully.
 	{
-	     if test -f "$dst"; then
+	  test ! -f "$dst" ||
-	       $doit $rmcmd -f "$dst" 2>/dev/null \
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	       || {
+	  } ||
-		 echo "$0: cannot unlink or rename $dst" >&2
+	  { echo "$0: cannot unlink or rename $dst" >&2
 	    (exit 1); exit 1
 	  }
 	     else
 	       :
 	     fi
 	} &&
 	# Now rename the file to the real destination.
 	$doit $mvcmd "$dsttmp" "$dst"
      }
-    } || exit 1
+    fi || exit 1
    trap '' 0
  fi
@@ -2,7 +2,7 @@
 # NOTE: Changing this file will not affect anything until you rerun configure.
 #
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007  Free Software Foundation, Inc.
+# 2007, 2008  Free Software Foundation, Inc.
 # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 #
 # This program is free software; you can redistribute it and/or modify
@@ -33,9 +33,6 @@ basename="s,^.*/,,g"
 # function.
 progpath="$0"
 # define SED for historic ltconfig's generated by Libtool 1.3
 test -z "$SED" && SED=sed
 # The name of this program:
 progname=`echo "$progpath" | $SED $basename`
 modename="$progname"
@@ -46,8 +43,8 @@ EXIT_FAILURE=1
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=1.5.24
+VERSION=1.5.26
-TIMESTAMP=" (1.1220.2.456 2007/06/24 02:25:32)"
+TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)"
 # Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -116,15 +113,21 @@ esac
 # These must not be set unconditionally because not all systems understand
 # e.g. LANG=C (notably SCO).
 # We save the old values to restore during execute mode.
-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+lt_env=
 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
 do
  eval "if test \"\${$lt_var+set}\" = set; then
 	  save_$lt_var=\$$lt_var
 	  lt_env=\"$lt_var=\$$lt_var \$lt_env\"
 	  $lt_var=C
 	  export $lt_var
 	fi"
 done
 if test -n "$lt_env"; then
  lt_env="env $lt_env"
 fi
 # Make sure IFS has a sensible default
 lt_nl='
 '
@@ -278,7 +281,21 @@ func_infer_tag ()
 	    esac
 	    CC_quoted="$CC_quoted $arg"
 	  done
 	    # user sometimes does CC=<HOST>-gcc so we need to match that to 'gcc'
 	    trimedcc=`echo ${CC} | $SED -e "s/${host}-//g"`
 	    # and sometimes libtool has CC=<HOST>-gcc but user does CC=gcc
 	    extendcc=${host}-${CC}
 	    # and sometimes libtool has CC=<OLDHOST>-gcc but user has CC=<NEWHOST>-gcc  
 	    # (Gentoo-specific hack because we always export $CHOST)
 	    mungedcc=${CHOST-${host}}-${trimedcc}
 	    case "$@ " in
 	      "cc "* | " cc "* | "${host}-cc "* | " ${host}-cc "*|\
 	      "gcc "* | " gcc "* | "${host}-gcc "* | " ${host}-gcc "*)
 	      tagname=CC
 	      break ;;
 	      "$trimedcc "* | " $trimedcc "* | "`$echo $trimedcc` "* | " `$echo $trimedcc` "*|\
 	      "$extendcc "* | " $extendcc "* | "`$echo $extendcc` "* | " `$echo $extendcc` "*|\
 	      "$mungedcc "* | " $mungedcc "* | "`$echo $mungedcc` "* | " `$echo $mungedcc` "*|\
 	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
 	      # The compiler in the base compile command matches
 	      # the one in the tagged configuration.
@@ -488,7 +505,7 @@ do
    echo "\
 $PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
-Copyright (C) 2007  Free Software Foundation, Inc.
+Copyright (C) 2008  Free Software Foundation, Inc.
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
    exit $?
@@ -791,6 +808,7 @@ if test -z "$show_help"; then
    *.for) xform=for ;;
    *.java) xform=java ;;
    *.obj) xform=obj ;;
    *.sx) xform=sx ;;
    esac
    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
@@ -884,7 +902,7 @@ if test -z "$show_help"; then
    # Lock this critical section if it is needed
    # We use this script file to make the link, it avoids creating a new file
    if test "$need_locks" = yes; then
-      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+      until $run ln "$srcfile" "$lockfile" 2>/dev/null; do
 	$show "Waiting for $lockfile to be removed"
 	sleep 2
      done
@@ -959,7 +977,7 @@ EOF
      $run $rm "$lobj" "$output_obj"
      $show "$command"
-      if $run eval "$command"; then :
+      if $run eval $lt_env "$command"; then :
      else
 	test -n "$output_obj" && $run $rm $removelist
 	exit $EXIT_FAILURE
@@ -1031,7 +1049,7 @@ EOF
      command="$command$suppress_output"
      $run $rm "$obj" "$output_obj"
      $show "$command"
-      if $run eval "$command"; then :
+      if $run eval $lt_env "$command"; then :
      else
 	$run $rm $removelist
 	exit $EXIT_FAILURE
@@ -1164,6 +1182,7 @@ EOF
    thread_safe=no
    vinfo=
    vinfo_number=no
    single_module="${wl}-single_module"
    func_infer_tag $base_compile
@@ -1649,6 +1668,11 @@ EOF
 	continue
 	;;
      -multi_module)
 	single_module="${wl}-multi_module"
 	continue
 	;;
      -module)
 	module=yes
 	continue
@@ -2152,7 +2176,12 @@ EOF
 	    continue
 	  fi
 	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+	  if test "$linkmode" = lib; then
 	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
 	  else
 	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
 	  fi
 	  for searchdir in $searchdirs; do
 	    for search_ext in .la $std_shrext .so .a; do
 	      # Search the libtool library
 	      lib="$searchdir/lib${name}${search_ext}"
@@ -2948,12 +2977,18 @@ EOF
 		  # we do not want to link against static libs,
 		  # but need to link against shared
 		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
 		  eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
 		  if test -n "$deplibrary_names" ; then
 		    for tmp in $deplibrary_names ; do
 		      depdepl=$tmp
 		    done
-		    if test -f "$path/$depdepl" ; then
+		    if test -f "$deplibdir/$depdepl" ; then
 		      depdepl="$deplibdir/$depdepl"
 	      	    elif test -f "$path/$depdepl" ; then
 		      depdepl="$path/$depdepl"
 		    else
 		      # Can't find it, oh well...
 		      depdepl=
 		    fi
 		    # do not add paths which are already there
 		    case " $newlib_search_path " in
@@ -3101,9 +3136,10 @@ EOF
    case $linkmode in
    oldlib)
-      if test -n "$deplibs"; then
+      case " $deplibs" in
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+      *\ -l* | *\ -L*)
-      fi
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;;
      esac
      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
@@ -4018,23 +4054,15 @@ EOF
 	fi
 	tmp_deplibs=
 	inst_prefix_arg=
 	for test_deplib in $deplibs; do
 		case " $convenience " in
 		*" $test_deplib "*) ;;
 		*)
 			if test -n "$inst_prefix_dir" && (echo "$test_deplib" | grep -- "$inst_prefix_dir" >/dev/null); then
 				inst_prefix_arg="$inst_prefix_arg $test_deplib"
 			else
 			tmp_deplibs="$tmp_deplibs $test_deplib"
 			fi
 			;;
 		esac
 	done
 	deplibs="$tmp_deplibs"
 	if test -n "$inst_prefix_arg"; then
 		deplibs="$inst_prefix_arg $deplibs"
 	fi
 	if test -n "$convenience"; then
 	  if test -n "$whole_archive_flag_spec"; then
@@ -4248,9 +4276,10 @@ EOF
      ;;
    obj)
-      if test -n "$deplibs"; then
+      case " $deplibs" in
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+      *\ -l* | *\ -L*)
-      fi
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;;
      esac
      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
 	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
@@ -5453,6 +5482,11 @@ else
 	$echo >> $output "\
    if test \"\$libtool_execute_magic\" != \"$magic\"; then
      # Run the actual program with our arguments.
      # Make sure env LD_LIBRARY_PATH does not mess us up
      if test -n \"\${LD_LIBRARY_PATH+set}\"; then
        export LD_LIBRARY_PATH=\$progdir:\$LD_LIBRARY_PATH
      fi
 "
 	case $host in
 	# Backslashes separate directories on plain windows
@@ -6489,7 +6523,7 @@ relink_command=\"$relink_command\""
      fi
      # Restore saved environment variables
-      for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
      do
 	eval "if test \"\${save_$lt_var+set}\" = set; then
 		$lt_var=\$save_$lt_var; export $lt_var
@@ -2,7 +2,7 @@
 # Process this file with autoconf to produce a configure script.
 AC_PREREQ(2.59)
-AC_INIT(libg15, 1.2.5, mlampard@users.sourceforge.net)
+AC_INIT(libg15, 1.2.7, mlampard@users.sourceforge.net)
 AC_PREFIX_DEFAULT(/usr)
 AC_CONFIG_AUX_DIR(config)
 AC_CANONICAL_TARGET()
@@ -1,10 +0,0 @@
 libg15 for Debian
 -----------------
 Notes about hardware
 Notes about configuration of other packages
 -- Giacomo Catenazzi <cate@debian.org>  Mon, 27 Aug 2007 07:56:10 +0200
@@ -1,3 +1,39 @@
 libg15 (1.2.7-3) unstable; urgency=medium
  * Reintroduce package (Closes: #928159).
  * New maintainer.
  * Remove redundant documentation files.
  * debian/patches/00-fix-reinit.patch: fix re_initLibG15() to properly reset
    internal state, allowing g15daemon to continue working after keyboard was
    replugged and after suspend or hibernate (LP: #1357556).
  * Use 3.0 (quilt) source format.
  * Switch to dh from cdbs.
  * Drop redundant build dependencies.
  * Update the homepage.
  * Multiarchify the package.
 -- Alexander Ponyatykh <lazyranma@gmail.com>  Fri, 10 May 2019 11:45:05 +0200
 libg15 (1.2.7-2) unstable; urgency=low
  * add list-missing to debian/rules
  * Don't export the .la file (see debian-devel@l.d.o)
  * We are conformant to policy 2.8.3
 -- Giacomo Catenazzi <cate@debian.org>  Thu, 10 Sep 2009 08:19:39 +0200
 libg15 (1.2.7-1) unstable; urgency=low
  * New upstream release
 -- Giacomo Catenazzi <cate@debian.org>  Wed, 22 Apr 2009 07:24:53 +0200
 libg15 (1.2.6-1) unstable; urgency=low
  * New upstream release
 -- Giacomo Catenazzi <cate@debian.org>  Mon, 28 Jan 2008 07:58:11 +0100
 libg15 (1.2.5-1) unstable; urgency=low
  * New upstream release
@@ -1 +1 @@
-5
+12
@@ -1,14 +1,16 @@
 Source: libg15
 Section: libs
 Priority: optional
-Maintainer: Giacomo Catenazzi <cate@debian.org>
+Maintainer: Alexander Ponyatykh <lazyranma@gmail.com>
-Build-Depends: cdbs, debhelper (>= 5), autotools-dev, libusb-dev
+Build-Depends: debhelper (>=12), libusb-dev
-Standards-Version: 3.7.3
+Standards-Version: 4.3.0
 Homepage: https://sourceforge.net/projects/g15tools/
 Package: libg15-1
 Section: libs
 Architecture: any
-Depends: ${shlibs:Depends}
+Multi-Arch: same
 Depends: ${shlibs:Depends}, ${misc:Depends}
 Description: Library for interfacing with the Logitech G15 keyboards
 libg15 provides an API for low level control of the LCD display and
 the extra keys on some Logitech keyboards (G11, G15)
@@ -17,8 +19,9 @@ Description: Library for interfacing with the Logitech G15 keyboards
 Package: libg15-dev
 Section: libdevel
-Depends: libg15-1 (= ${binary:Version})
+Depends: libg15-1 (= ${binary:Version}), ${misc:Depends}
 Architecture: any
 Multi-Arch: same
 Description: Library for interfacing with the Logitech G15 keyboards
 libg15 provides an API for low level control of the LCD display and
 the extra keys on some Logitech keyboards (G11, G15).
@@ -1 +1 @@
-debian/tmp/usr/lib/lib*.so.* usr/lib/
+debian/tmp/usr/lib/*/lib*.so.*
@@ -1,5 +1,3 @@
-debian/tmp/usr/include/* usr/include/
+debian/tmp/usr/include/*
-debian/tmp/usr/lib/lib*.a usr/lib/
+debian/tmp/usr/lib/*/lib*.a
-debian/tmp/usr/lib/lib*.so usr/lib/
+debian/tmp/usr/lib/*/lib*.so
 debian/tmp/usr/lib/*.la usr/lib/
@@ -1 +1 @@
-usr/lib/libg15*.so.*
+usr/lib/*/libg15*.so.*
@@ -0,0 +1,85 @@
 Description: fix re_initLibG15() to properly reset internal state.
 Author: Alexander Ponyatykh <lazyranma@gmail.com>
 Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/libusb/+bug/1357556
 Forwarded: no
 Last-Update: 2015-05-17
 ===================================================================
 --- a/libg15.c
 +++ b/libg15.c
@@ -275,19 +275,36 @@
     return keyboard_device;
 }
 +/* reset the keyboard, returning it to a known state */
 +static int closeKeyboardDevice()
 +{
 +    int retval = G15_NO_ERROR;
 +
 +    enospc_slowdown = shared_device = g15_keys_endpoint = g15_lcd_endpoint = 0;
 +    found_devicetype = -1;
 +
 +    if (keyboard_device){
 +#ifndef SUN_LIBUSB
 +        retval = usb_release_interface (keyboard_device, 0);
 +        usleep(50*1000);
 +#endif
 +#if 0
 +        retval = usb_reset(keyboard_device);
 +        usleep(50*1000);
 +#endif
 +        usb_close(keyboard_device);
 +        keyboard_device=0;
 +        return retval;
 +    }
 +    return -1;
 +}
 int re_initLibG15()
 {
 +    closeKeyboardDevice();
 -    usb_init();
 -
 -  /**
 -     *  usb_find_busses and usb_find_devices both report the number of devices
 -     *  / busses added / removed since the last call. since this is the first
 -   *  call we have to return values != 0 or else we didnt find anything */
 -     
 -    if (!usb_find_devices())
 -        return G15_ERROR_OPENING_USB_DEVICE;
 +    usb_find_busses();
 +    usb_find_devices();
     keyboard_device = findAndOpenG15();
     if (!keyboard_device)
@@ -319,28 +336,12 @@
     return retval;
 }
 -/* reset the keyboard, returning it to a known state */
 int exitLibG15()
 {
 -    int retval = G15_NO_ERROR;
 -    if (keyboard_device){
 -#ifndef SUN_LIBUSB
 -        retval = usb_release_interface (keyboard_device, 0);
 -        usleep(50*1000);
 -#endif
 -#if 0
 -        retval = usb_reset(keyboard_device);
 -        usleep(50*1000);
 -#endif
 -        usb_close(keyboard_device);
 -        keyboard_device=0;
 -        pthread_mutex_destroy(&libusb_mutex);
 -        return retval;
 -    }
 -    return -1;
 +    pthread_mutex_destroy(&libusb_mutex);
 +    return closeKeyboardDevice();
 }
 -
 static void dumpPixmapIntoLCDFormat(unsigned char *lcd_buffer, unsigned char const *data)
 {
 /*
@@ -0,0 +1 @@
 00-fix-reinit.patch
@@ -1,8 +1,11 @@
 #!/usr/bin/make -f
 DH_VERBOSE = 1
 DEB_DH_MAKESHLIBS_ARGS_libg15 := --version-info
-include /usr/share/cdbs/1/rules/debhelper.mk
+%:
-include /usr/share/cdbs/1/class/autotools.mk
+	dh $@
-DEB_CONFIGURE_EXTRA_FLAGS = --quiet
+override_dh_makeshlibs:
 	dh_makeshlibs --version-info=None
@@ -0,0 +1 @@
 3.0 (quilt)
@@ -3,5 +3,5 @@
 # Compulsory line, this is a version 3 file
 version=3
-http://sf.net/g15tools libg15-(.*)\.tar\.bz2
+http://sf.net/g15tools libg15-(.*)\.tar\.gz
@@ -17,7 +17,7 @@
    (c) 2006-2007 The G15tools Project - g15tools.sf.net
-    $Revision: 278 $ -  $Date: 2008-01-02 14:26:25 +1030 (Wed, 02 Jan 2008) $ $Author: mlampard $
+    $Revision: 292 $ -  $Date: 2008-11-11 08:51:25 -0500 (Tue, 11 Nov 2008) $ $Author: aneurysm9 $
 */
 #include <pthread.h>
@@ -45,7 +45,8 @@ const libg15_devices_t g15_devices[] = {
    DEVICE("Logitech G15",0x46d,0xc222,G15_LCD|G15_KEYS),
    DEVICE("Logitech G11",0x46d,0xc225,G15_KEYS),
    DEVICE("Logitech Z-10",0x46d,0x0a07,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED),
-    DEVICE("Logitech G15 v2",0x46d,0xc227,G15_LCD|G15_KEYS),
+    DEVICE("Logitech G15 v2",0x46d,0xc227,G15_LCD|G15_KEYS|G15_DEVICE_5BYTE_RETURN),
    DEVICE("Logitech Gamepanel",0x46d,0xc251,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED),
    DEVICE(NULL,0,0,0)
 };
@@ -764,13 +765,13 @@ static void processKeyEvent5Byte(unsigned int *pressed_keys, unsigned char *buff
 int getPressedKeys(unsigned int *pressed_keys, unsigned int timeout)
 {
-    unsigned char buffer[9];
+    unsigned char buffer[G15_KEY_READ_LENGTH];
    int ret = 0;
 #ifdef LIBUSB_BLOCKS
-    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, 9, timeout);
+    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, G15_KEY_READ_LENGTH, timeout);
 #else
    pthread_mutex_lock(&libusb_mutex);
-    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, 9, timeout);
+    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, G15_KEY_READ_LENGTH, timeout);
    pthread_mutex_unlock(&libusb_mutex);
 #endif
    if(ret>0) {
@@ -17,7 +17,7 @@
    (c) 2006 - 2007 The G15tools Project - g15tools.sf.net
-    $Revision: 273 $ -  $Date: 2007-11-25 17:14:21 +1030 (Sun, 25 Nov 2007) $ $Author: mlampard $
+    $Revision: 292 $ -  $Date: 2008-11-11 08:51:25 -0500 (Tue, 11 Nov 2008) $ $Author: aneurysm9 $
 */
 #ifndef _LIBG15_H_
@@ -31,6 +31,9 @@ extern "C"
 #define G15_LCD 1
 #define G15_KEYS 2
 #define G15_DEVICE_IS_SHARED 4
 #define G15_DEVICE_5BYTE_RETURN 8
 #define G15_KEY_READ_LENGTH 9
 typedef struct libg15_devices_t libg15_devices_t;
@@ -3,11 +3,11 @@
 %define prefix	/usr
 Summary: library to control logitech G15 keyboards
 Name: libg15
-Version: 1.2.5
+Version: 1.2.7
 Release: 1
 Copyright: GPL
 Group: Applications/System
-Source: http://prdownloads.sourceforge.net/g15tools/libg15-1.2.5.tar.bz2
+Source: http://prdownloads.sourceforge.net/g15tools/libg15-1.2.7.tar.bz2
 URL: http://sourceforge.net/projects/g15tools
 Distribution: Linux
 Vendor: NONE
Author	SHA1	Message	Date
Alexander Ponyatykh	1b84f9ae6d	Update the changelog	2019-05-10 11:46:02 +02:00
Alexander Ponyatykh	f0ab55d7b4	New maintainer	2019-05-10 11:42:52 +02:00
Alexander Ponyatykh	8416e8294e	Update policy version to 4.3.0	2019-05-10 11:42:31 +02:00
Alexander Ponyatykh	1126bcf712	Switch to dh from cdbs, multiarchify, update debian/control	2019-05-10 11:41:39 +02:00
Alexander Ponyatykh	4cf9e13b7e	Use 3.0 (quilt) source format	2019-05-10 11:39:02 +02:00
Alexander Ponyatykh	0c642df5e3	Remove redundant documentation files	2019-05-10 11:36:38 +02:00
Alexander Ponyatykh	dfaff3b01b	Add a patch to fix re_initLibG15() to properly reset the internal state This allows g15daemon to continue working after keyboard was replugged and after suspend or hibernate. LP: #1357556	2019-05-10 11:34:58 +02:00
Daniel Schepler	ef8cd284b9	Import Debian changes 1.2.7-2+libtool libg15 (1.2.7-2+libtool) unreleased; urgency=low * Update libtool at build time using dh-autoreconf, in order to fix a build failure on x32.	2013-03-05 07:23:03 -08:00
Giacomo Catenazzi	2db3a95b79	Import Debian changes 1.2.7-2 libg15 (1.2.7-2) unstable; urgency=low * add list-missing to debian/rules * Don't export the .la file (see debian-devel@l.d.o) * We are conformant to policy 2.8.3	2009-09-10 08:19:39 +02:00
Giacomo Catenazzi	585875bc07	Import Debian changes 1.2.7-1 libg15 (1.2.7-1) unstable; urgency=low * New upstream release	2009-04-22 07:24:53 +02:00
Giacomo Catenazzi	862c94c485	Import Upstream version 1.2.7	2019-04-29 15:39:29 +02:00
Giacomo Catenazzi	fd6a5d112b	Import Upstream version 1.2.6	2019-04-29 15:39:29 +02:00
Giacomo Catenazzi	981e33d1a8	Import Debian changes 1.2.6-1 libg15 (1.2.6-1) unstable; urgency=low * New upstream release	2008-01-28 07:58:11 +01:00
		`@@ -1 +1 @@`
			`debian/tmp/usr/lib/lib.so. usr/lib/`				`debian/tmp/usr/lib//lib.so.*`