Update the changelog

Removed override for dh_makeshlibs, because this version changes ABI
Fix spelling error in log message
2019-11-16 19:16:18 +01:00 · 2019-11-15 01:10:05 +03:00 · 2019-11-14 00:57:22 +03:00 · 2019-11-14 00:29:44 +03:00 · 2019-11-13 22:51:35 +03:00 · 2019-11-13 22:51:35 +03:00
32 changed files with 736 additions and 40845 deletions
@@ -1,3 +1,5 @@
 Philip Lawatsch <philip@lawatsch.at>
 Alex Ibrado <alex@ibrado.org>
 Anthony J. Mirabella <mirabeaj@gmail.com>
+Mike Lampard <mlampard@users.sourceforge.net>
+
@@ -29,5 +29,23 @@
  thread in the middle of a screen transfer etc.
 * Reset the keyboard before init to ensure correct initialisation on kernels > 2.6.19
 1.2.2
-* Parse usb descriptors to find correct endpoints
-* Add Z-10 speaker support
+* Add support for the logitech Z-10 speakers - many thanks to Dwayne Fontenot for
+  detailed information and debugging.
+1.2.3
+* Add support for the newer G15 keyboards which have amber backlights and
+  six 'G' keys.
+1.2.4
+* Turns out that the newer G15's have a different (5 byte) keyboard protocol.  
+* Optimise dumpPixmapIntoLCDFormat routine - Thanks to Adam Nielsen
+1.2.5
+* Remove 5BYTE_RETURN flag and process key packets based on length. Please
+  report any regressions.
+* Add Solaris detection and remove locks if detected.  Solaris' libUSB
+  blocks on read, forcing mutexes causes writes to block too.
+1.2.6
+* Re-Add 5BYTE_RETURN flag. Auto-detect does not work with Solaris' libusb.
+* Add laptop GamePanel support.
+1.2.7
+* Fix keypress detection for G15v2 keyboards
+1.3
+* Add support for the G13 device
@@ -1,7 +1,7 @@
 LLIBDIR=@LIBDIR@ 
 lib_LTLIBRARIES = libg15.la
 libg15_la_SOURCES = libg15.h libg15.c
-libg15_la_LDFLAGS = -version-info 1:0:0
+libg15_la_LDFLAGS = -version-info 1:1:0
 include_HEADERS= libg15.h
 EXTRA_DIST = debian rpm

@@ -1,637 +0,0 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
-	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/config.h.in $(top_srcdir)/configure AUTHORS COPYING \
-	ChangeLog INSTALL NEWS config/config.guess config/config.sub \
-	config/depcomp config/install-sh config/ltmain.sh \
-	config/missing
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"
-libLTLIBRARIES_INSTALL = $(INSTALL)
-LTLIBRARIES = $(lib_LTLIBRARIES)
-libg15_la_LIBADD =
-am_libg15_la_OBJECTS = libg15.lo
-libg15_la_OBJECTS = $(am_libg15_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
-depcomp = $(SHELL) $(top_srcdir)/config/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(libg15_la_SOURCES)
-DIST_SOURCES = $(libg15_la_SOURCES)
-includeHEADERS_INSTALL = $(INSTALL_HEADER)
-HEADERS = $(include_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-LLIBDIR = @LIBDIR@ 
-lib_LTLIBRARIES = libg15.la
-libg15_la_SOURCES = libg15.h libg15.c
-libg15_la_LDFLAGS = -version-info 1:0:0
-include_HEADERS = libg15.h
-EXTRA_DIST = debian rpm
-all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-am--refresh:
-	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
-	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in:  $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
-	  else :; fi; \
-	done
-
-uninstall-libLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
-	done
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
-libg15.la: $(libg15_la_OBJECTS) $(libg15_la_DEPENDENCIES) 
-	$(LINK) -rpath $(libdir) $(libg15_la_LDFLAGS) $(libg15_la_OBJECTS) $(libg15_la_LIBADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libg15.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-install-includeHEADERS: $(include_HEADERS)
-	@$(NORMAL_INSTALL)
-	test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
-	@list='$(include_HEADERS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
-	  $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
-	done
-
-uninstall-includeHEADERS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(include_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(includedir)/$$f"; \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/config
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
-	  dist-hook
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(HEADERS) config.h
-installdirs:
-	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-hdr distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-includeHEADERS
-
-install-exec-am: install-libLTLIBRARIES
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-includeHEADERS uninstall-info-am \
-	uninstall-libLTLIBRARIES
-
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
-	clean-generic clean-libLTLIBRARIES clean-libtool ctags dist \
-	dist-all dist-bzip2 dist-gzip dist-hook dist-shar dist-tarZ \
-	dist-zip distcheck distclean distclean-compile \
-	distclean-generic distclean-hdr distclean-libtool \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-exec install-exec-am \
-	install-includeHEADERS install-info install-info-am \
-	install-libLTLIBRARIES install-man install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-includeHEADERS \
-	uninstall-info-am uninstall-libLTLIBRARIES
-
-
-dist-hook:
-	rm -rf `find $(distdir)/debian -name .svn`
-	rm -rf `find $(distdir)/rpm -name .svn`
-
-dist-rpm: dist-bzip2
-	rpmbuild -ts $(distdir).tar.bz2
-
-dist-archives:
-	$(MAKE) dist-bzip2
-	$(MAKE) dist-rpm
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
@@ -1 +1,10 @@
-This is a library to handle the LCD and extra keys on the Logitech G15 Gaming Keyboard.  This library requires libusb.
+This is a library to handle the LCD and extra keys on the Logitech G15 Gaming
+Keyboard and similar devices.
+This library requires libusb.
+LibG15 currently supports LCD & keys on the following devices:
+- Original G15 keyboard
+- G11 keyboard
+- Z10 speakers
+- 2nd revision of the G15 (amber backlight, 6 'G' keys, LCD)
+- Gamepanel available on some laptops
+- G13 game device
@@ -0,0 +1,8 @@
+#! /bin/sh
+
+set -x
+aclocal -I config
+libtoolize --force --copy
+autoheader
+automake --add-missing --copy
+autoconf
@@ -1,67 +0,0 @@
-/* config.h.in.  Generated from configure.in by autoheader.  */
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the `usb' library (-lusb). */
-#undef HAVE_LIBUSB
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `memset' function. */
-#undef HAVE_MEMSET
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the <usb.h> header file. */
-#undef HAVE_USB_H
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
@@ -1,530 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2005-07-09.11
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> $depfile
-    echo >> $depfile
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
-  if test "$libtool" = yes; then
-    "$@" -Wc,-M
-  else
-    "$@" -M
-  fi
-  stat=$?
-
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-
-  if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mecanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no
-  for arg in "$@"; do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  "$@" || exit $?
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
@@ -1,323 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2005-05-14.22
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-chmodcmd="$chmodprog 0755"
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-c         (ignored)
-d         create directories instead of installing files.
-g GROUP   $chgrpprog installed files to GROUP.
-m MODE    $chmodprog installed files to MODE.
-o USER    $chownprog installed files to USER.
-s         $stripprog installed files.
-t DIRECTORY  install into DIRECTORY.
-T         report an error if DSTFILE is a directory.
--help     display this help and exit.
--version  display version info and exit.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test -n "$1"; do
-  case $1 in
-    -c) shift
-        continue;;
-
-    -d) dir_arg=true
-        shift
-        continue;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
-
-    -T) no_target_directory=true
-	shift
-	continue;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    *)  # When -d is used, all remaining arguments are directories to create.
-	# When -t is used, the destination is already specified.
-	test -n "$dir_arg$dstarg" && break
-        # Otherwise, the last argument is the destination.  Remove it from $@.
-	for arg
-	do
-          if test -n "$dstarg"; then
-	    # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
-	    shift # fnord
-	  fi
-	  shift # arg
-	  dstarg=$arg
-	done
-	break;;
-  esac
-done
-
-if test -z "$1"; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src ;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    src=
-
-    if test -d "$dst"; then
-      mkdircmd=:
-      chmodcmd=
-    else
-      mkdircmd=$mkdirprog
-    fi
-  else
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dstarg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
-	exit 1
-      fi
-      dst=$dst/`basename "$src"`
-    fi
-  fi
-
-  # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
-
-  # Make sure that the destination directory exists.
-
-  # Skip lots of stat calls in the usual case.
-  if test ! -d "$dstdir"; then
-    defaultIFS='
-	 '
-    IFS="${IFS-$defaultIFS}"
-
-    oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
-    IFS='%'
-    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-    shift
-    IFS=$oIFS
-
-    pathcomp=
-
-    while test $# -ne 0 ; do
-      pathcomp=$pathcomp$1
-      shift
-      if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp"
-	# mkdir can fail with a `File exist' error in case several
-	# install-sh are creating the directory concurrently.  This
-	# is OK.
-	test -d "$pathcomp" || exit
-      fi
-      pathcomp=$pathcomp/
-    done
-  fi
-
-  if test -n "$dir_arg"; then
-    $doit $mkdircmd "$dst" \
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
-  else
-    dstfile=`basename "$dst"`
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-    trap '(exit $?); exit' 1 2 13 15
-
-    # Copy the file name to the temp name.
-    $doit $cpprog "$src" "$dsttmp" &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dstdir/$dstfile"; then
-	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-	       || {
-		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-	 }
-    }
-  fi || { (exit 1); exit 1; }
-done
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit 0
-}
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
@@ -1,360 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2005-06-08.21
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
-#   Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case "$1" in
--run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case "$1" in
-  lex|yacc)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case "$firstarg" in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case "$firstarg" in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
@@ -2,9 +2,11 @@
 # Process this file with autoconf to produce a configure script.

 AC_PREREQ(2.59)
-AC_INIT(libg15, 1.2.2, mlampard@users.sourceforge.net)
+AC_INIT(libg15, 1.3, mlampard@users.sourceforge.net)
 AC_PREFIX_DEFAULT(/usr)
 AC_CONFIG_AUX_DIR(config)
+AC_CANONICAL_TARGET()
+
 AM_INIT_AUTOMAKE()
 AC_CONFIG_SRCDIR([libg15.c])
 AC_CONFIG_HEADER([config.h])
@@ -13,9 +15,29 @@ AC_CONFIG_HEADER([config.h])
 AC_PROG_CC
 AC_PROG_LIBTOOL

+case $host_os in
+	*linux*) 
+	  AC_DEFINE([OSTYPE_LINUX], [1],[Target OS is Linux])
+	  ;;
+	*darwin*)
+	  AC_DEFINE([OSTYPE_DARWIN], [1],[Target OS is Darwin])
+	  ;;
+        *solaris*)
+          AC_DEFINE([OSTYPE_SOLARIS], [1],[Target OS is Solaris])
+	  AC_SEARCH_LIBS([nanosleep],rt,[],[],[])
+          AC_DEFINE(SUN_LIBUSB, 1, [Define to 1 for Sun version of libusb.])
+	  libusb_blocks=true	  
+	  ;;
+esac
+
 # Checks for libraries.
 AC_CHECK_LIB([usb], [main], ,AC_MSG_ERROR(["libusb not found. please install it"]))

+dnl Some versions of libusb do not honour timeout and block. Suns' version is one of them.
+if test "x$libusb_blocks" == "xtrue"; then
+      AC_DEFINE([LIBUSB_BLOCKS], [1],[Define if libusb implementation blocks on read or write])
+fi
+
 # Checks for header files.
 AC_HEADER_STDC
 AC_CHECK_HEADERS([string.h])
@@ -1,10 +0,0 @@
-libg15 for Debian
-----------------
-
-Notes about hardware
-
-Notes about configuration of other packages
-
-
-
- -- Giacomo Catenazzi <cate@debian.org>  Mon, 27 Aug 2007 07:56:10 +0200
@@ -1,3 +1,69 @@
+libg15 (1.3.0~svn324-1) unstable; urgency=medium
+
+  * New upstream version 1.3.0~svn324.
+    - Support for G13, G110 and G510 devices (Closes: #622898).
+  * Fix spelling in the log message.
+  * Remove an outdated and useless watch file.
+  * Сonformant to policy 4.4.1.1.
+  * Remove obsolete (CDBS) variable from debian/rules.
+  * Add Vcs fields to debian/control.
+
+ -- Alexander Ponyatykh <lazyranma@gmail.com>  Thu, 14 Nov 2019 00:55:32 +0300
+
+libg15 (1.2.7-3) unstable; urgency=medium
+
+  * Reintroduce package (Closes: #928159).
+  * New maintainer.
+  * Remove redundant documentation files.
+  * debian/patches/00-fix-reinit.patch: fix re_initLibG15() to properly reset
+    internal state, allowing g15daemon to continue working after keyboard was
+    replugged and after suspend or hibernate (LP: #1357556).
+  * Use 3.0 (quilt) source format.
+  * Switch to dh from cdbs.
+  * Drop redundant build dependencies.
+  * Update the homepage.
+  * Multiarchify the package.
+
+ -- Alexander Ponyatykh <lazyranma@gmail.com>  Fri, 10 May 2019 11:45:05 +0200
+
+libg15 (1.2.7-2) unstable; urgency=low
+
+  * add list-missing to debian/rules
+  * Don't export the .la file (see debian-devel@l.d.o)
+  * We are conformant to policy 2.8.3
+
+ -- Giacomo Catenazzi <cate@debian.org>  Thu, 10 Sep 2009 08:19:39 +0200
+
+libg15 (1.2.7-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Wed, 22 Apr 2009 07:24:53 +0200
+
+libg15 (1.2.6-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Mon, 28 Jan 2008 07:58:11 +0100
+
+libg15 (1.2.5-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Wed, 09 Jan 2008 08:06:33 +0100
+
+libg15 (1.2.4-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Tue, 18 Dec 2007 08:08:43 +0100
+
+libg15 (1.2.3-1) unstable; urgency=low
+
+  * New upstrem version: add support of new g15 keyboards
+
+ -- Giacomo Catenazzi <cate@debian.org>  Thu, 15 Nov 2007 07:44:43 +0100
+
 libg15 (1.2.2-1) unstable; urgency=low

  * Initial release
@@ -1 +1 @@
-5
+12
@@ -1,13 +1,16 @@
 Source: libg15
 Section: libs
 Priority: optional
-Maintainer: Giacomo Catenazzi <cate@debian.org>
-Build-Depends: cdbs, debhelper (>= 5), autotools-dev, libusb-dev
-Standards-Version: 3.7.2
+Maintainer: Alexander Ponyatykh <lazyranma@gmail.com>
+Build-Depends: debhelper (>=12), libusb-dev
+Standards-Version: 4.4.1
+Homepage: https://sourceforge.net/projects/g15tools/
+Vcs-Git: https://salsa.debian.org/debian/libg15.git
+Vcs-Browser: https://salsa.debian.org/debian/libg15

 Package: libg15-1
-Section: libs
 Architecture: any
+Multi-Arch: same
 Depends: ${shlibs:Depends}, ${misc:Depends}
 Description: Library for interfacing with the Logitech G15 keyboards
 libg15 provides an API for low level control of the LCD display and
@@ -17,8 +20,9 @@ Description: Library for interfacing with the Logitech G15 keyboards

 Package: libg15-dev
 Section: libdevel
-Depends: libg15-1 (= ${binary:Version})
+Depends: libg15-1 (= ${binary:Version}), ${misc:Depends}
 Architecture: any
+Multi-Arch: same
 Description: Library for interfacing with the Logitech G15 keyboards
 libg15 provides an API for low level control of the LCD display and
 the extra keys on some Logitech keyboards (G11, G15).
@@ -1 +1 @@
-debian/tmp/usr/lib/lib*.so.* usr/lib/
+debian/tmp/usr/lib/*/lib*.so.*
@@ -1,5 +1,3 @@
-debian/tmp/usr/include/* usr/include/
-debian/tmp/usr/lib/lib*.a usr/lib/
-debian/tmp/usr/lib/lib*.so usr/lib/
-debian/tmp/usr/lib/*.la usr/lib/
-
+debian/tmp/usr/include/*
+debian/tmp/usr/lib/*/lib*.a
+debian/tmp/usr/lib/*/lib*.so
@@ -1 +1 @@
-usr/lib/libg15*.so.*
+usr/lib/*/libg15*.so.*
@@ -0,0 +1,85 @@
+Description: fix re_initLibG15() to properly reset internal state.
+Author: Alexander Ponyatykh <lazyranma@gmail.com>
+Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/libusb/+bug/1357556
+Forwarded: no
+Last-Update: 2015-05-17
+===================================================================
+--- a/libg15.c
+++ b/libg15.c
+@@ -283,19 +283,36 @@
+     return keyboard_device;
+ }
+ 
+-
+-int re_initLibG15()
+/* reset the keyboard, returning it to a known state */
+static int closeKeyboardDevice()
+ {
+    int retval = G15_NO_ERROR;
+ 
+-    usb_init();
+    enospc_slowdown = shared_device = g15_keys_endpoint = g15_lcd_endpoint = 0;
+    found_devicetype = -1;
+ 
+-  /**
+-     *  usb_find_busses and usb_find_devices both report the number of devices
+-     *  / busses added / removed since the last call. since this is the first
+-   *  call we have to return values != 0 or else we didnt find anything */
+    if (keyboard_device){
+#ifndef SUN_LIBUSB
+        retval = usb_release_interface (keyboard_device, 0);
+        usleep(50*1000);
+#endif
+#if 0
+        retval = usb_reset(keyboard_device);
+        usleep(50*1000);
+#endif
+        usb_close(keyboard_device);
+        keyboard_device=0;
+        return retval;
+    }
+    return -1;
+}
+ 
+-    if (!usb_find_devices())
+-        return G15_ERROR_OPENING_USB_DEVICE;
+int re_initLibG15()
+{
+    closeKeyboardDevice();
+
+    usb_find_busses();
+    usb_find_devices();
+ 
+     keyboard_device = findAndOpenG15();
+     if (!keyboard_device)
+@@ -327,28 +344,12 @@
+     return retval;
+ }
+ 
+-/* reset the keyboard, returning it to a known state */
+ int exitLibG15()
+ {
+-    int retval = G15_NO_ERROR;
+-    if (keyboard_device){
+-#ifndef SUN_LIBUSB
+-        retval = usb_release_interface (keyboard_device, 0);
+-        usleep(50*1000);
+-#endif
+-#if 0
+-        retval = usb_reset(keyboard_device);
+-        usleep(50*1000);
+-#endif
+-        usb_close(keyboard_device);
+-        keyboard_device=0;
+-        pthread_mutex_destroy(&libusb_mutex);
+-        return retval;
+-    }
+-    return -1;
+    pthread_mutex_destroy(&libusb_mutex);
+    return closeKeyboardDevice();
+ }
+ 
+-
+ static void dumpPixmapIntoLCDFormat(unsigned char *lcd_buffer, unsigned char const *data)
+ {
+ /*
@@ -0,0 +1,20 @@
+--- a/libg15.c
+++ b/libg15.c
+@@ -152,7 +152,7 @@
+                 if (!devh)
+                 {
+                     g15_log(stderr,G15_LOG_INFO, "Error, could not open the keyboard\n");
+-                    g15_log(stderr,G15_LOG_INFO, "Perhaps you dont have enough permissions to access it\n");
+                    g15_log(stderr,G15_LOG_INFO, "Perhaps you don't have enough permissions to access it\n");
+                     return 0;
+                 }
+ 
+@@ -434,7 +434,7 @@
+         case -ETIMEDOUT:
+             return G15_ERROR_READING_USB_DEVICE;  /* backward-compatibility */
+             break;
+-            case -ENOSPC: /* the we dont have enough bandwidth, apparently.. something has to give here.. */
+            case -ENOSPC: /* the we don't have enough bandwidth, apparently.. something has to give here.. */
+                 g15_log(stderr,G15_LOG_INFO,"usb error: ENOSPC.. reducing speed\n");
+                 enospc_slowdown = 1;
+                 break;
@@ -0,0 +1,2 @@
+00-fix-reinit.patch
+01-fix-spelling-error
@@ -1,8 +1,6 @@
 #!/usr/bin/make -f

-DEB_DH_MAKESHLIBS_ARGS_libg15 := --version-info
-
-include /usr/share/cdbs/1/rules/debhelper.mk
-include /usr/share/cdbs/1/class/autotools.mk
-
+DH_VERBOSE = 1

+%:
+	dh $@
@@ -0,0 +1 @@
+3.0 (quilt)
@@ -1,7 +0,0 @@
-# See uscan(1) for format
-
-# Compulsory line, this is a version 3 file
-version=3
-
-http://sf.net/g15tools libg15-(.*)\.tar\.bz2
-
@@ -12,8 +12,12 @@
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
-    along with g15lcd; if not, write to the Free Software
+    along with libg15; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+    (c) 2006-2007 The G15tools Project - g15tools.sf.net
+
+    $Revision: 324 $ -  $Date: 2011-02-24 03:13:57 +0300 (Thu, 24 Feb 2011) $ $Author: SteelSide $
 */

 #include <pthread.h>
@@ -23,6 +27,7 @@
 #include <usb.h>
 #include <string.h>
 #include <errno.h>
+#include "config.h"

 static usb_dev_handle *keyboard_device = 0;
 static int libg15_debugging_enabled = 0;
@@ -34,13 +39,18 @@ static int g15_keys_endpoint = 0;
 static int g15_lcd_endpoint = 0;
 static pthread_mutex_t libusb_mutex;

-
 /* to add a new device, simply create a new DEVICE() in this list */
 /* Fields are: "Name",VendorID,ProductID,Capabilities */
 const libg15_devices_t g15_devices[] = {
    DEVICE("Logitech G15",0x46d,0xc222,G15_LCD|G15_KEYS),
    DEVICE("Logitech G11",0x46d,0xc225,G15_KEYS),
    DEVICE("Logitech Z-10",0x46d,0x0a07,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED),
+    DEVICE("Logitech G15 v2",0x46d,0xc227,G15_LCD|G15_KEYS|G15_DEVICE_5BYTE_RETURN),
+    DEVICE("Logitech Gamepanel",0x46d,0xc251,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED),
+    DEVICE("Logitech G13",0x46d,0xc21c,G15_LCD|G15_KEYS|G15_DEVICE_G13),
+    DEVICE("Logitech G110",0x46d,0xc22b,G15_KEYS),
+    DEVICE("Logitech G510",0x46d,0xc22d,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED|G15_DEVICE_G510), /* without audio activated */
+    DEVICE("Logitech G510",0x46d,0xc22e,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED|G15_DEVICE_G510), /* with audio activated */
    DEVICE(NULL,0,0,0)
 };

@@ -158,6 +168,10 @@ static usb_dev_handle * findAndOpenDevice(libg15_devices_t handled_device, int d
                    struct usb_config_descriptor *cfg = &dev->config[j];

                    for (i=0;i<cfg->bNumInterfaces; i++){
+                        if (g15DeviceCapabilities()&G15_DEVICE_G510){
+                            if (i==G510_STANDARD_KEYBOARD_INTERFACE) continue;
+                        }
+
                        struct usb_interface *ifp = &cfg->interface[i];
                        /* if endpoints are already known, finish up */
                        if(g15_keys_endpoint && g15_lcd_endpoint)
@@ -191,7 +205,7 @@ static usb_dev_handle * findAndOpenDevice(libg15_devices_t handled_device, int d
                                    }
                                    else
                                    {
-                                        g15_log(stderr,G15_LOG_INFO,"Sorry, I could not detached the driver, giving up\n");
+                                        g15_log(stderr,G15_LOG_INFO,"Sorry, I could not detach the driver, giving up\n");
                                        return 0;
                                    }

@@ -297,6 +311,12 @@ int initLibG15()
    if (retval)
        return retval;

+    g15_log(stderr,G15_LOG_INFO,"%s\n",PACKAGE_STRING);
+
+#ifdef SUN_LIBUSB
+    g15_log(stderr,G15_LOG_INFO,"Using Sun libusb.\n");
+#endif
+
    g15NumberOfConnectedDevices();

    keyboard_device = findAndOpenG15();
@@ -312,8 +332,10 @@ int exitLibG15()
 {
    int retval = G15_NO_ERROR;
    if (keyboard_device){
+#ifndef SUN_LIBUSB
        retval = usb_release_interface (keyboard_device, 0);
        usleep(50*1000);
+#endif
 #if 0
        retval = usb_reset(keyboard_device);
        usleep(50*1000);
@@ -329,36 +351,84 @@ int exitLibG15()

 static void dumpPixmapIntoLCDFormat(unsigned char *lcd_buffer, unsigned char const *data)
 {
-    unsigned int offset_from_start = G15_LCD_OFFSET;
+/*
+
+  For a set of bytes (A, B, C, etc.) the bits representing pixels will appear on the LCD like this:
+
+	A0 B0 C0
+	A1 B1 C1
+	A2 B2 C2
+	A3 B3 C3 ... and across for G15_LCD_WIDTH bytes
+	A4 B4 C4
+	A5 B5 C5
+	A6 B6 C6
+	A7 B7 C7
+
+	A0
+	A1  <- second 8-pixel-high row starts straight after the last byte on
+	A2     the previous row
+	A3
+	A4
+	A5
+	A6
+	A7
+	A8
+
+	A0
+	...
+	A0
+	...
+	A0
+	...
+	A0
+	A1 <- only the first three bits are shown on the bottom row (the last three
+	A2    pixels of the 43-pixel high display.)
+
+
+*/
+
+    unsigned int output_offset = G15_LCD_OFFSET;
+    unsigned int base_offset = 0;
    unsigned int curr_row = 0;
    unsigned int curr_col = 0;

-    for (curr_row=0;curr_row<G15_LCD_HEIGHT;++curr_row)
-    {
-        for (curr_col=0;curr_col<G15_LCD_WIDTH;++curr_col)
-        {
-            unsigned int pixel_offset = curr_row*G15_LCD_WIDTH + curr_col;
-            unsigned int byte_offset = pixel_offset / 8;
-            unsigned int bit_offset = pixel_offset % 8;
-            unsigned int val = data[byte_offset] & 1<<(7-bit_offset);
-      
-            unsigned int row = curr_row / 8;
-            unsigned int offset = G15_LCD_WIDTH*row + curr_col;
-            unsigned int bit = curr_row % 8;
-    
-/*
-            if (val)
-            printf("Setting pixel at row %d col %d to %d offset %d bit %d\n",curr_row,curr_col, val, offset, bit);
+    /* Five 8-pixel rows + a little 3-pixel row.  This formula will calculate
+       the minimum number of bytes required to hold a complete column.  (It
+       basically divides by eight and rounds up the result to the nearest byte,
+       but at compile time.
      */
-            if (val)
-                lcd_buffer[offset_from_start + offset] = lcd_buffer[offset_from_start + offset] | 1 << bit;
-            else
-                lcd_buffer[offset_from_start + offset] = lcd_buffer[offset_from_start + offset]  &  ~(1 << bit);
+
+#define G15_LCD_HEIGHT_IN_BYTES  ((G15_LCD_HEIGHT + ((8 - (G15_LCD_HEIGHT % 8)) % 8)) / 8)
+
+    for (curr_row = 0; curr_row < G15_LCD_HEIGHT_IN_BYTES; ++curr_row)
+    {
+        for (curr_col = 0; curr_col < G15_LCD_WIDTH; ++curr_col)
+        {
+            unsigned int bit = curr_col % 8;
+		/* Copy a 1x8 column of pixels across from the source image to the LCD buffer. */
+
+            lcd_buffer[output_offset] =
+			(((data[base_offset                        ] << bit) & 0x80) >> 7) |
+			(((data[base_offset +  G15_LCD_WIDTH/8     ] << bit) & 0x80) >> 6) |
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 2)] << bit) & 0x80) >> 5) |
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 3)] << bit) & 0x80) >> 4) |
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 4)] << bit) & 0x80) >> 3) |
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 5)] << bit) & 0x80) >> 2) |
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 6)] << bit) & 0x80) >> 1) |
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 7)] << bit) & 0x80) >> 0);
+            ++output_offset;
+            if (bit == 7)
+              base_offset++;
        }
+	/* Jump down seven pixel-rows in the source image, since we've just
+	   done a row of eight pixels in one pass (and we counted one pixel-row
+  	   while we were going, so now we skip the next seven pixel-rows.) */
+	base_offset += G15_LCD_WIDTH - (G15_LCD_WIDTH / 8);
    }
 }

 int handle_usb_errors(const char *prefix, int ret) {
+
    switch (ret){
        case -ETIMEDOUT:
            return G15_ERROR_READING_USB_DEVICE;  /* backward-compatibility */
@@ -373,7 +443,7 @@ int handle_usb_errors(const char *prefix, int ret) {
            case -EAGAIN: /* try again */
            case -EFBIG: /* too many frames to handle */
            case -EMSGSIZE: /* msgsize is invalid */
-                 g15_log(stderr,G15_LOG_INFO,"usb error: %s (%i)\n",prefix,ret);     
+                 g15_log(stderr,G15_LOG_INFO,"usb error: %s %s (%i)\n",prefix,usb_strerror(),ret);
                 break;
            case -EPIPE: /* endpoint is stalled */
                 g15_log(stderr,G15_LOG_INFO,"usb error: %s EPIPE! clearing...\n",prefix);
@@ -382,7 +452,7 @@ int handle_usb_errors(const char *prefix, int ret) {
                 pthread_mutex_unlock(&libusb_mutex);
                 break;
            default: /* timed out */
-                 g15_log(stderr,G15_LOG_INFO,"Unknown usb error: %s !! (err is %i)\n",prefix,ret);     
+                 g15_log(stderr,G15_LOG_INFO,"Unknown usb error: %s !! (err is %i (%s))\n",prefix,ret,usb_strerror());
    }
    return ret;
 }
@@ -392,7 +462,10 @@ int writePixmapToLCD(unsigned char const *data)
    int ret = 0;
    int transfercount=0;
    unsigned char lcd_buffer[G15_BUFFER_LEN];
-    memset(lcd_buffer,0,G15_BUFFER_LEN);
+    /* The pixmap conversion function will overwrite everything after G15_LCD_OFFSET, so we only need to blank
+       the buffer up to this point.  (Even though the keyboard only cares about bytes 0-23.) */
+    memset(lcd_buffer, 0, G15_LCD_OFFSET);  /* G15_BUFFER_LEN); */
+
    dumpPixmapIntoLCDFormat(lcd_buffer, data);

    if(!(g15_devices[found_devicetype].caps & G15_LCD))
@@ -406,7 +479,9 @@ int writePixmapToLCD(unsigned char const *data)
    I'm not sure how successful this will be in combatting ENOSPC, but we'll give it try in the real-world. */

    if(enospc_slowdown != 0){
+#ifndef LIBUSB_BLOCKS
        pthread_mutex_lock(&libusb_mutex);
+#endif
        for(transfercount = 0;transfercount<=31;transfercount++){
            ret = usb_interrupt_write(keyboard_device, g15_lcd_endpoint, (char*)lcd_buffer+(32*transfercount), 32, 1000);
            if (ret != 32)
@@ -416,12 +491,18 @@ int writePixmapToLCD(unsigned char const *data)
            }
            usleep(100);
        }
+#ifndef LIBUSB_BLOCKS
        pthread_mutex_unlock(&libusb_mutex);
+#endif
    }else{
        /* transfer entire buffer in one hit */
+#ifdef LIBUSB_BLOCKS
+        ret = usb_interrupt_write(keyboard_device, g15_lcd_endpoint, (char*)lcd_buffer, G15_BUFFER_LEN, 1000);
+#else
        pthread_mutex_lock(&libusb_mutex);
        ret = usb_interrupt_write(keyboard_device, g15_lcd_endpoint, (char*)lcd_buffer, G15_BUFFER_LEN, 1000);
        pthread_mutex_unlock(&libusb_mutex);
+#endif
        if (ret != G15_BUFFER_LEN)
        {
            handle_usb_errors ("LCDPixmap Write",ret);
@@ -464,6 +545,9 @@ int setLEDs(unsigned int leds)
    unsigned char m_led_buf[4] = { 2, 4, 0, 0 };
    m_led_buf[2] = ~(unsigned char)leds;

+    if(g15DeviceCapabilities()&G15_DEVICE_G510)
+        setG510LEDColor(0, 255, 0);
+
    if(shared_device>0)
        return G15_ERROR_UNSUPPORTED;

@@ -524,6 +608,21 @@ int setKBBrightness(unsigned int level)
    return retval;
 }

+int setG510LEDColor(unsigned char r, unsigned char g, unsigned char b)
+{
+    int retval = 0;
+    unsigned char usb_data[] = { 4, 0, 0, 0 };
+
+    usb_data[1] = r;
+    usb_data[2] = g;
+    usb_data[3] = b;
+
+    pthread_mutex_lock(&libusb_mutex);
+    retval = usb_control_msg(keyboard_device, USB_TYPE_CLASS + USB_RECIP_INTERFACE, 9, 0x305, 1, (char*)usb_data, 4, 10000);
+    pthread_mutex_unlock(&libusb_mutex);
+    return retval;
+}
+
 static unsigned char g15KeyToLogitechKeyCode(int key)
 {
   // first 12 G keys produce F1 - F12, thats 0x3a + key
@@ -538,7 +637,97 @@ static unsigned char g15KeyToLogitechKeyCode(int key)
    }
 }

-static void processKeyEvent(unsigned int *pressed_keys, unsigned char *buffer)
+static void processKeyEventG13(unsigned int *pressed_keys, unsigned char *buffer)
+{
+    int i;
+
+    *pressed_keys = 0;
+
+    g15_log(stderr,G15_LOG_WARN,"Keyboard G13: %x, %x, %x, %x, %x, %x, %x, %x, %x\n",buffer[0],buffer[1],buffer[2],buffer[3],buffer[4],buffer[5],buffer[6],buffer[7],buffer[8]);
+
+    if (buffer[0] == 0x25)
+    {
+        if (buffer[3]&0x01)
+      *pressed_keys |= G15_KEY_G1;
+        if (buffer[3]&0x02)
+      *pressed_keys |= G15_KEY_G2;
+        if (buffer[3]&0x04)
+      *pressed_keys |= G15_KEY_G3;
+        if (buffer[3]&0x08)
+      *pressed_keys |= G15_KEY_G4;
+        if (buffer[3]&0x10)
+      *pressed_keys |= G15_KEY_G5;
+        if (buffer[3]&0x20)
+      *pressed_keys |= G15_KEY_G6;
+        if (buffer[3]&0x40)
+      *pressed_keys |= G15_KEY_G7;
+        if (buffer[3]&0x80)
+      *pressed_keys |= G15_KEY_G8;
+
+        if (buffer[4]&0x01)
+      *pressed_keys |= G15_KEY_G9;
+        if (buffer[4]&0x02)
+      *pressed_keys |= G15_KEY_G10;
+        if (buffer[4]&0x04)
+      *pressed_keys |= G15_KEY_G11;
+        if (buffer[4]&0x08)
+      *pressed_keys |= G15_KEY_G12;
+        if (buffer[4]&0x10)
+      *pressed_keys |= G15_KEY_G13;
+        if (buffer[4]&0x20)
+      *pressed_keys |= G15_KEY_G14;
+        if (buffer[4]&0x40)
+      *pressed_keys |= G15_KEY_G15;
+        if (buffer[4]&0x80)
+      *pressed_keys |= G15_KEY_G16;
+        if (buffer[5]&0x01)
+      *pressed_keys |= G15_KEY_G17;
+        if (buffer[5]&0x02)
+      *pressed_keys |= G15_KEY_G18;
+        if (buffer[5]&0x04)
+      *pressed_keys |= G15_KEY_G19;
+        if (buffer[5]&0x08)
+      *pressed_keys |= G15_KEY_G20;
+        if (buffer[5]&0x10)
+      *pressed_keys |= G15_KEY_G21;
+        if (buffer[5]&0x20)
+      *pressed_keys |= G15_KEY_G22;
+        if (buffer[5]&0x80)
+      *pressed_keys |= G15_KEY_LIGHT;
+
+        if (buffer[6]&0x01)
+      *pressed_keys |= G15_KEY_L1;
+        if (buffer[6]&0x02)
+      *pressed_keys |= G15_KEY_L2;
+        if (buffer[6]&0x04)
+      *pressed_keys |= G15_KEY_L3;
+        if (buffer[6]&0x08)
+      *pressed_keys |= G15_KEY_L4;
+        if (buffer[6]&0x10)
+      *pressed_keys |= G15_KEY_L5;
+
+        if (buffer[6]&0x20)
+      *pressed_keys |= G15_KEY_M1;
+        if (buffer[6]&0x40)
+      *pressed_keys |= G15_KEY_M2;
+        if (buffer[6]&0x80)
+      *pressed_keys |= G15_KEY_M3;
+        if (buffer[7]&0x01)
+      *pressed_keys |= G15_KEY_MR;
+
+      /*
+        if (buffer[7]&0x02)
+      *pressed_keys |= G15_KEY_JOYBL;
+        if (buffer[7]&0x04)
+      *pressed_keys |= G15_KEY_JOYBD;
+        if (buffer[7]&0x08)
+      *pressed_keys |= G15_KEY_JOYBS;
+      */
+    }
+
+}
+
+static void processKeyEvent9Byte(unsigned int *pressed_keys, unsigned char *buffer)
 {
    int i;

@@ -629,22 +818,252 @@ static void processKeyEvent(unsigned int *pressed_keys, unsigned char *buffer)
    }
 }

+static void processKeyEvent5Byte(unsigned int *pressed_keys, unsigned char *buffer)
+{
+    int i;
+
+    *pressed_keys = 0;
+
+    g15_log(stderr,G15_LOG_WARN,"Keyboard: %x, %x, %x, %x, %x\n",buffer[0],buffer[1],buffer[2],buffer[3],buffer[4]);
+
+    if (buffer[0] == 0x02)
+    {
+        if (buffer[1]&0x01)
+            *pressed_keys |= G15_KEY_G1;
+
+        if (buffer[1]&0x02)
+            *pressed_keys |= G15_KEY_G2;
+
+        if (buffer[1]&0x04)
+            *pressed_keys |= G15_KEY_G3;
+
+        if (buffer[1]&0x08)
+            *pressed_keys |= G15_KEY_G4;
+
+        if (buffer[1]&0x10)
+            *pressed_keys |= G15_KEY_G5;
+
+        if (buffer[1]&0x20)
+            *pressed_keys |= G15_KEY_G6;
+
+        if (buffer[1]&0x40)
+            *pressed_keys |= G15_KEY_M1;
+
+        if (buffer[1]&0x80)
+            *pressed_keys |= G15_KEY_M2;
+
+        if (buffer[2]&0x20)
+            *pressed_keys |= G15_KEY_M3;
+
+        if (buffer[2]&0x40)
+            *pressed_keys |= G15_KEY_MR;
+
+        if (buffer[2]&0x80)
+            *pressed_keys |= G15_KEY_L1;
+
+        if (buffer[2]&0x2)
+            *pressed_keys |= G15_KEY_L2;
+
+        if (buffer[2]&0x4)
+            *pressed_keys |= G15_KEY_L3;
+
+        if (buffer[2]&0x8)
+            *pressed_keys |= G15_KEY_L4;
+
+        if (buffer[2]&0x10)
+            *pressed_keys |= G15_KEY_L5;
+
+        if (buffer[2]&0x1)
+            *pressed_keys |= G15_KEY_LIGHT;
+    }
+
+    // G510
+    if (buffer[0] == 0x03)
+    {
+        if (buffer[1]&0x01)
+            *pressed_keys |= G15_KEY_G1;
+
+        if (buffer[1]&0x02)
+            *pressed_keys |= G15_KEY_G2;
+
+        if (buffer[1]&0x04)
+            *pressed_keys |= G15_KEY_G3;
+
+        if (buffer[1]&0x08)
+            *pressed_keys |= G15_KEY_G4;
+
+        if (buffer[1]&0x10)
+            *pressed_keys |= G15_KEY_G5;
+
+        if (buffer[1]&0x20)
+            *pressed_keys |= G15_KEY_G6;
+
+        if (buffer[1]&0x40)
+            *pressed_keys |= G15_KEY_G7;
+
+        if (buffer[1]&0x80)
+            *pressed_keys |= G15_KEY_G8;
+
+        if (buffer[2]&0x01)
+            *pressed_keys |= G15_KEY_G9;
+
+        if (buffer[2]&0x02)
+            *pressed_keys |= G15_KEY_G10;
+
+        if (buffer[2]&0x04)
+            *pressed_keys |= G15_KEY_G11;
+
+        if (buffer[2]&0x08)
+            *pressed_keys |= G15_KEY_G12;
+
+        if (buffer[2]&0x10)
+            *pressed_keys |= G15_KEY_G13;
+
+        if (buffer[2]&0x20)
+            *pressed_keys |= G15_KEY_G14;
+
+        if (buffer[2]&0x40)
+            *pressed_keys |= G15_KEY_G15;
+
+        if (buffer[2]&0x80)
+            *pressed_keys |= G15_KEY_G16;
+
+        if (buffer[3]&0x01)
+            *pressed_keys |= G15_KEY_G17;
+
+        if (buffer[3]&0x02)
+            *pressed_keys |= G15_KEY_G18;
+
+        if (buffer[3]&0x10)
+            *pressed_keys |= G15_KEY_M1;
+
+        if (buffer[3]&0x20)
+            *pressed_keys |= G15_KEY_M2;
+
+        if (buffer[3]&0x40)
+            *pressed_keys |= G15_KEY_M3;
+
+        if (buffer[3]&0x80)
+            *pressed_keys |= G15_KEY_MR;
+
+        if (buffer[4]&0x1)
+            *pressed_keys |= G15_KEY_L1;
+
+        if (buffer[4]&0x2)
+            *pressed_keys |= G15_KEY_L2;
+
+        if (buffer[4]&0x4)
+            *pressed_keys |= G15_KEY_L3;
+
+        if (buffer[4]&0x8)
+            *pressed_keys |= G15_KEY_L4;
+
+        if (buffer[4]&0x10)
+            *pressed_keys |= G15_KEY_L5;
+
+        if (buffer[3]&0x8)
+            *pressed_keys |= G15_KEY_LIGHT;
+    }
+}
+
+static void processKeyEvent4Byte(unsigned int *pressed_keys, unsigned char *buffer)
+{
+	int i;
+
+	*pressed_keys = 0;
+
+	g15_log(stderr,G15_LOG_WARN,"Keyboard: %x, %x, %x, %x\n",buffer[0],buffer[1],buffer[2],buffer[3]);
+
+	if (buffer[0] == 0x02)
+	{
+		if (buffer[1]&0x01)
+			*pressed_keys |= G15_KEY_G1;
+
+		if (buffer[1]&0x02)
+			*pressed_keys |= G15_KEY_G2;
+
+		if (buffer[1]&0x04)
+			*pressed_keys |= G15_KEY_G3;
+
+		if (buffer[1]&0x08)
+			*pressed_keys |= G15_KEY_G4;
+
+		if (buffer[1]&0x10)
+			*pressed_keys |= G15_KEY_G5;
+
+		if (buffer[1]&0x20)
+			*pressed_keys |= G15_KEY_G6;
+
+		if (buffer[1]&0x40)
+			*pressed_keys |= G15_KEY_G7;
+
+		if (buffer[1]&0x80)
+			*pressed_keys |= G15_KEY_G8;
+
+		if (buffer[2]&0x01)
+			*pressed_keys |= G15_KEY_G9;
+
+		if (buffer[2]&0x02)
+			*pressed_keys |= G15_KEY_G10;
+
+		if (buffer[2]&0x04)
+			*pressed_keys |= G15_KEY_G11;
+
+		if (buffer[2]&0x08)
+			*pressed_keys |= G15_KEY_G12;
+
+		if (buffer[2]&0x10)
+			*pressed_keys |= G15_KEY_M1;
+
+		if (buffer[2]&0x20)
+			*pressed_keys |= G15_KEY_M2;
+
+		if (buffer[2]&0x40)
+			*pressed_keys |= G15_KEY_M3;
+
+		if (buffer[2]&0x80)
+			*pressed_keys |= G15_KEY_MR;
+
+		if (buffer[3]&0x1)
+			*pressed_keys |= G15_KEY_LIGHT;
+	}
+}
+
 int getPressedKeys(unsigned int *pressed_keys, unsigned int timeout)
 {
-    unsigned char buffer[9];
+    unsigned char buffer[G15_KEY_READ_LENGTH];
    int ret = 0;
+    int caps = 0;
+
+#ifdef LIBUSB_BLOCKS
+    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, G15_KEY_READ_LENGTH, timeout);
+#else
    pthread_mutex_lock(&libusb_mutex);
-    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, 9, timeout);
+    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, G15_KEY_READ_LENGTH, timeout);
    pthread_mutex_unlock(&libusb_mutex);
-   
-    if (ret == 9)
-    {
-        if (buffer[0] == 1)
+#endif
+    if(ret>0) {
+      if(buffer[0] == 1)
        return G15_ERROR_TRY_AGAIN;
+    }

-        processKeyEvent(pressed_keys, buffer);
-    
+    caps = g15DeviceCapabilities();
+    if((caps & G15_DEVICE_G13) && buffer[0]==0x25){
+      processKeyEventG13(pressed_keys, buffer);
      return G15_NO_ERROR;
    }
+
+    switch(ret) {
+      case 4:
+          processKeyEvent4Byte(pressed_keys, buffer);
+          return G15_NO_ERROR;
+      case 5:
+          processKeyEvent5Byte(pressed_keys, buffer);
+          return G15_NO_ERROR;
+      case 9:
+          processKeyEvent9Byte(pressed_keys, buffer);
+          return G15_NO_ERROR;
+      default:
          return handle_usb_errors("Keyboard Read", ret); /* allow the app to deal with errors */
+    }
 }
@@ -14,6 +14,10 @@
    You should have received a copy of the GNU General Public License
    along with g15lcd; if not, write to the Free Software
    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+    
+    (c) 2006 - 2007 The G15tools Project - g15tools.sf.net
+    
+    $Revision: 324 $ -  $Date: 2011-02-24 03:13:57 +0300 (Thu, 24 Feb 2011) $ $Author: SteelSide $
 */

 #ifndef _LIBG15_H_
@@ -27,6 +31,12 @@ extern "C"
 #define G15_LCD 1
 #define G15_KEYS 2
 #define G15_DEVICE_IS_SHARED 4
+#define G15_DEVICE_5BYTE_RETURN 8
+#define G15_DEVICE_G13 16
+#define G15_DEVICE_G510 32
+
+#define G15_KEY_READ_LENGTH 9
+#define G510_STANDARD_KEYBOARD_INTERFACE	0x0

 typedef struct libg15_devices_t libg15_devices_t;

@@ -119,6 +129,10 @@ struct libg15_devices_t {
    G15_KEY_G16 = 1<<15,
    G15_KEY_G17 = 1<<16,
    G15_KEY_G18 = 1<<17,
+    G15_KEY_G19 = 1<<28,
+    G15_KEY_G20 = 1<<29,
+    G15_KEY_G21 = 1<<30,
+    G15_KEY_G22 = 1<<31,

    G15_KEY_M1  = 1<<18,
    G15_KEY_M2  = 1<<19,
@@ -132,6 +146,11 @@ struct libg15_devices_t {
    G15_KEY_L5  = 1<<26,

    G15_KEY_LIGHT = 1<<27
+
+    //need to add them to the enum but not enough positions left
+    //  G15_KEY_JOYBL = 1<<32,
+    //  G15_KEY_JOYBD = 1<<33,
+    //  G15_KEY_JOYBS = 1<<34
  };


@@ -150,6 +169,7 @@ struct libg15_devices_t {
  int setLEDs(unsigned int leds);
  int setLCDBrightness(unsigned int level);
  int setKBBrightness(unsigned int level);  
+  int setG510LEDColor(unsigned char r, unsigned char g, unsigned char b);  

  /* Please be warned
   * the g15 sends two different usb msgs for each key press
@@ -3,11 +3,11 @@
 %define prefix	/usr
 Summary: library to control logitech G15 keyboards
 Name: libg15
-Version: 1.2.2
+Version: 1.2.7
 Release: 1
-Copyright: GPL
+License: GPL
 Group: Applications/System
-Source: http://prdownloads.sourceforge.net/g15tools/libg15-1.2.2.tar.bz2
+Source: http://prdownloads.sourceforge.net/g15tools/libg15-1.2.7.tar.bz2
 URL: http://sourceforge.net/projects/g15tools
 Distribution: Linux
 Vendor: NONE
@@ -20,7 +20,7 @@ Provides: libg15
 %description
 libg15 controls the G15 keyboard, providing applications access
 to the keyboard's LCD display, and the additional keys available
-on this keyboard. Logitech Z-10 speakers and G11 keyboards are also supported.
+on this keyboard.

 %package devel
 Summary: libg15 controls the G15 keyboard and LCD.
@@ -32,7 +32,7 @@ Provides: libg15-devel
 %description devel
 libg15 controls the G15 keyboard, providing applications access
 to the keyboard's LCD display, and the additional keys available
-on this keyboard. Logitech Z-10 speakers and G11 keyboards are also supported.
+on this keyboard.

 %prep
 %setup
Author	SHA1	Message	Date
Andrej Shadura	2cea8187ec	Update the changelog	2019-11-16 19:16:18 +01:00
Alexander Ponyatykh	9bccbfa208	Removed override for dh_makeshlibs, because this version changes ABI	2019-11-15 01:10:05 +03:00
Alexander Ponyatykh	9c78d63e0c	Fix spelling error in log message	2019-11-14 00:57:22 +03:00
Alexander Ponyatykh	854430b9b8	Update packaging: * Remove watch file. * Сonformant to policy 4.4.1.1. * Remove obsolete variable from debian/rules. * Add Vcs fileds to debian/control	2019-11-14 00:29:44 +03:00
Alexander Ponyatykh	63fce22fd8	Update upstream source from tag 'upstream/1.3.0_svn324' Update to upstream version '1.3.0~svn324' with Debian dir `f7dfa8d20b`	2019-11-13 22:51:35 +03:00
Alexander Ponyatykh	649e30d0a2	New upstream version 1.3.0~svn324	2019-11-13 22:51:35 +03:00
Alexander Ponyatykh	1b84f9ae6d	Update the changelog	2019-05-10 11:46:02 +02:00
Alexander Ponyatykh	f0ab55d7b4	New maintainer	2019-05-10 11:42:52 +02:00
Alexander Ponyatykh	8416e8294e	Update policy version to 4.3.0	2019-05-10 11:42:31 +02:00
Alexander Ponyatykh	1126bcf712	Switch to dh from cdbs, multiarchify, update debian/control	2019-05-10 11:41:39 +02:00
Alexander Ponyatykh	4cf9e13b7e	Use 3.0 (quilt) source format	2019-05-10 11:39:02 +02:00
Alexander Ponyatykh	0c642df5e3	Remove redundant documentation files	2019-05-10 11:36:38 +02:00
Alexander Ponyatykh	dfaff3b01b	Add a patch to fix re_initLibG15() to properly reset the internal state This allows g15daemon to continue working after keyboard was replugged and after suspend or hibernate. LP: #1357556	2019-05-10 11:34:58 +02:00
Giacomo Catenazzi	862c94c485	Import Upstream version 1.2.7	2019-04-29 15:39:29 +02:00
Giacomo Catenazzi	fd6a5d112b	Import Upstream version 1.2.6	2019-04-29 15:39:29 +02:00
Giacomo Catenazzi	7347e0eb26	Import Upstream version 1.2.5	2019-04-29 15:39:28 +02:00
Giacomo Catenazzi	3f84e6db54	Import Upstream version 1.2.4	2019-04-29 15:39:28 +02:00
Giacomo Catenazzi	429a74151c	Import Upstream version 1.2.3	2019-04-29 15:39:28 +02:00
Daniel Schepler	ef8cd284b9	Import Debian changes 1.2.7-2+libtool libg15 (1.2.7-2+libtool) unreleased; urgency=low * Update libtool at build time using dh-autoreconf, in order to fix a build failure on x32.	2013-03-05 07:23:03 -08:00
Giacomo Catenazzi	2db3a95b79	Import Debian changes 1.2.7-2 libg15 (1.2.7-2) unstable; urgency=low * add list-missing to debian/rules * Don't export the .la file (see debian-devel@l.d.o) * We are conformant to policy 2.8.3	2009-09-10 08:19:39 +02:00
Giacomo Catenazzi	585875bc07	Import Debian changes 1.2.7-1 libg15 (1.2.7-1) unstable; urgency=low * New upstream release	2009-04-22 07:24:53 +02:00
Giacomo Catenazzi	981e33d1a8	Import Debian changes 1.2.6-1 libg15 (1.2.6-1) unstable; urgency=low * New upstream release	2008-01-28 07:58:11 +01:00
Giacomo Catenazzi	09feb56516	Import Debian changes 1.2.5-1 libg15 (1.2.5-1) unstable; urgency=low * New upstream release	2008-01-09 08:06:33 +01:00
Giacomo Catenazzi	f47538d475	Import Debian changes 1.2.4-1 libg15 (1.2.4-1) unstable; urgency=low * New upstream release	2007-12-18 08:08:43 +01:00
Giacomo Catenazzi	38380e6484	Import Debian changes 1.2.3-1 libg15 (1.2.3-1) unstable; urgency=low * New upstrem version: add support of new g15 keyboards	2007-11-15 07:44:43 +01:00