Update the changelog

This allows g15daemon to continue working after keyboard was
replugged and after suspend or hibernate.

LP: #1357556

AUTHORS

@@ -1,3 +1,5 @@
 Philip Lawatsch <philip@lawatsch.at>
 Alex Ibrado <alex@ibrado.org>
 Anthony J. Mirabella <mirabeaj@gmail.com>
+Mike Lampard <mlampard@users.sourceforge.net>
+

ChangeLog

@@ -29,5 +29,21 @@
   thread in the middle of a screen transfer etc.
 * Reset the keyboard before init to ensure correct initialisation on kernels > 2.6.19
 1.2.2
-* Parse usb descriptors to find correct endpoints
-* Add Z-10 speaker support
+* Add support for the logitech Z-10 speakers - many thanks to Dwayne Fontenot for
+  detailed information and debugging.
+1.2.3
+* Add support for the newer G15 keyboards which have amber backlights and
+  six 'G' keys.
+1.2.4
+* Turns out that the newer G15's have a different (5 byte) keyboard protocol.  
+* Optimise dumpPixmapIntoLCDFormat routine - Thanks to Adam Nielsen
+1.2.5
+* Remove 5BYTE_RETURN flag and process key packets based on length. Please
+  report any regressions.
+* Add Solaris detection and remove locks if detected.  Solaris' libUSB
+  blocks on read, forcing mutexes causes writes to block too.
+1.2.6
+* Re-Add 5BYTE_RETURN flag. Auto-detect does not work with Solaris' libusb.
+* Add laptop GamePanel support.
+1.2.7
+* Fix keypress detection for G15v2 keyboards

Makefile.in

@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,15 +15,11 @@
 @SET_MAKE@
 
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -37,19 +33,20 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
+target_triplet = @target@
+subdir = .
 DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
 	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 	$(srcdir)/config.h.in $(top_srcdir)/configure AUTHORS COPYING \
 	ChangeLog INSTALL NEWS config/config.guess config/config.sub \
 	config/depcomp config/install-sh config/ltmain.sh \
 	config/missing
-subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
@@ -65,17 +62,21 @@ LTLIBRARIES = $(lib_LTLIBRARIES)
 libg15_la_LIBADD =
 am_libg15_la_OBJECTS = libg15.lo
 libg15_la_OBJECTS = $(am_libg15_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
+libg15_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libg15_la_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/config/depcomp
 am__depfiles_maybe = depfiles
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
 SOURCES = $(libg15_la_SOURCES)
 DIST_SOURCES = $(libg15_la_SOURCES)
 includeHEADERS_INSTALL = $(INSTALL_HEADER)
@@ -94,8 +95,6 @@ GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
@@ -114,6 +113,7 @@ CXXFLAGS = @CXXFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
 ECHO = @ECHO@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
@@ -123,6 +123,7 @@ EXEEXT = @EXEEXT@
 F77 = @F77@
 FFLAGS = @FFLAGS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -134,6 +135,8 @@ LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NMEDIT = @NMEDIT@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
@@ -143,17 +146,18 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -165,6 +169,7 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -192,8 +197,15 @@ program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
+target = @target@
 target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 LLIBDIR = @LIBDIR@ 
 lib_LTLIBRARIES = libg15.la
 libg15_la_SOURCES = libg15.h libg15.c
@@ -242,7 +254,7 @@ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 config.h: stamp-h1
 	@if test ! -f $@; then \
 	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
 	else :; fi
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@@ -257,21 +269,21 @@ distclean-hdr:
 	-rm -f config.h stamp-h1
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
-	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  if test -f $$p; then \
 	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
 	  else :; fi; \
 	done
 
 uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
 	done
 
 clean-libLTLIBRARIES:
@@ -283,7 +295,7 @@ clean-libLTLIBRARIES:
 	  rm -f "$${dir}/so_locations"; \
 	done
 libg15.la: $(libg15_la_OBJECTS) $(libg15_la_DEPENDENCIES) 
-	$(LINK) -rpath $(libdir) $(libg15_la_LDFLAGS) $(libg15_la_OBJECTS) $(libg15_la_LIBADD) $(LIBS)
+	$(libg15_la_LINK) -rpath $(libdir) $(libg15_la_OBJECTS) $(libg15_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -294,22 +306,22 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libg15.Plo@am__quote@
 
 .c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -322,10 +334,9 @@ clean-libtool:
 
 distclean-libtool:
 	-rm -f libtool
-uninstall-info-am:
 install-includeHEADERS: $(include_HEADERS)
 	@$(NORMAL_INSTALL)
-	test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
 	@list='$(include_HEADERS)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -346,8 +357,8 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
@@ -359,8 +370,8 @@ TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
 	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
@@ -370,13 +381,12 @@ ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$tags$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$tags $$unique
@@ -391,24 +401,22 @@ distclean-tags:
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/config
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	test -d $(distdir) || mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
 	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 	    fi; \
@@ -425,7 +433,7 @@ distdir: $(DISTFILES)
 	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r $(distdir)
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
@@ -435,6 +443,10 @@ dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
@@ -461,6 +473,8 @@ distcheck: dist
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
@@ -500,7 +514,7 @@ distcheck: dist
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
 	@cd $(distuninstallcheck_dir) \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
@@ -524,7 +538,7 @@ check: check-am
 all-am: Makefile $(LTLIBRARIES) $(HEADERS) config.h
 installdirs:
 	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@@ -574,12 +588,20 @@ info-am:
 
 install-data-am: install-includeHEADERS
 
+install-dvi: install-dvi-am
+
 install-exec-am: install-libLTLIBRARIES
 
+install-html: install-html-am
+
 install-info: install-info-am
 
 install-man:
 
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -602,24 +624,27 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-includeHEADERS uninstall-info-am \
-	uninstall-libLTLIBRARIES
+uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
 	clean-generic clean-libLTLIBRARIES clean-libtool ctags dist \
-	dist-all dist-bzip2 dist-gzip dist-hook dist-shar dist-tarZ \
-	dist-zip distcheck distclean distclean-compile \
+	dist-all dist-bzip2 dist-gzip dist-hook dist-lzma dist-shar \
+	dist-tarZ dist-zip distcheck distclean distclean-compile \
 	distclean-generic distclean-hdr distclean-libtool \
 	distclean-tags distcleancheck distdir distuninstallcheck dvi \
 	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-exec install-exec-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
 	install-includeHEADERS install-info install-info-am \
-	install-libLTLIBRARIES install-man install-strip installcheck \
+	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
 	installcheck-am installdirs maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-compile \
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags uninstall uninstall-am uninstall-includeHEADERS \
-	uninstall-info-am uninstall-libLTLIBRARIES
+	uninstall-libLTLIBRARIES
 
 
 dist-hook:

README

@@ -1 +1,9 @@
-This is a library to handle the LCD and extra keys on the Logitech G15 Gaming Keyboard.  This library requires libusb.
+This is a library to handle the LCD and extra keys on the Logitech G15 Gaming
+Keyboard and similar devices.
+This library requires libusb.
+LibG15 currently supports LCD & keys on the following devices:
+- Original G15 keyboard
+- G11 keyboard
+- Z10 speakers
+- 2nd revision of the G15 (amber backlight, 6 'G' keys, LCD)
+- Gamepanel available on some laptops

config.h.in

@@ -39,6 +39,18 @@
 /* Define to 1 if you have the <usb.h> header file. */
 #undef HAVE_USB_H
 
+/* Define if libusb implementation blocks on read or write */
+#undef LIBUSB_BLOCKS
+
+/* Target OS is Darwin */
+#undef OSTYPE_DARWIN
+
+/* Target OS is Linux */
+#undef OSTYPE_LINUX
+
+/* Target OS is Solaris */
+#undef OSTYPE_SOLARIS
+
 /* Name of package */
 #undef PACKAGE
 
@@ -60,6 +72,9 @@
 /* Define to 1 if you have the ANSI C header files. */
 #undef STDC_HEADERS
 
+/* Define to 1 for Sun version of libusb. */
+#undef SUN_LIBUSB
+
 /* Version number of package */
 #undef VERSION
 

config/config.guess

@@ -1,9 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   Free Software Foundation, Inc.
 
-timestamp='2005-08-03'
+timestamp='2008-01-23'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -55,8 +56,8 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -106,7 +107,7 @@ set_cc_for_build='
 trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
 trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
 : ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
  { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
  { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
  { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
@@ -138,6 +139,23 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
+if [ "${UNAME_SYSTEM}" = "Linux" ] ; then
+	eval $set_cc_for_build
+	cat << EOF > $dummy.c
+	#include <features.h>
+	#ifdef __UCLIBC__
+	# ifdef __UCLIBC_CONFIG_VERSION__
+	LIBC=uclibc __UCLIBC_CONFIG_VERSION__
+	# else
+	LIBC=uclibc
+	# endif
+	#else
+	LIBC=gnu
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep LIBC= | sed -e 's: ::g'`
+fi
+
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -160,6 +178,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    arm*) machine=arm-unknown ;;
 	    sh3el) machine=shl-unknown ;;
 	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
 	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
@@ -206,8 +225,11 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:ekkoBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
 	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
     macppc:MirBSD:*:*)
-	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
 	exit ;;
     *:MirBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
@@ -325,7 +347,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
-    i86pc:SunOS:5.*:*)
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
@@ -527,7 +549,7 @@ EOF
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[45])
+    *:AIX:*:[456])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -764,12 +786,19 @@ EOF
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit ;;
     *:FreeBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	case ${UNAME_MACHINE} in
+	    pc98)
+		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
-    i*:MINGW*:*)
+    *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
     i*:windows32*:*)
@@ -779,9 +808,18 @@ EOF
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit ;;
-    x86:Interix*:[34]*)
-	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+    *:Interix*:[3456]*)
+    	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
 		exit ;;
+	    EM64T | authenticamd)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
 	exit ;;
@@ -815,25 +853,35 @@ EOF
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
     arm*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	else
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     cris:Linux:*:*)
-	echo cris-axis-linux-gnu
+	echo cris-axis-linux-${LIBC}
 	exit ;;
     crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
+	echo crisv32-axis-linux-${LIBC}
 	exit ;;
     frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
+    	echo frv-unknown-linux-${LIBC}
 	exit ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     mips:Linux:*:*)
 	eval $set_cc_for_build
@@ -851,8 +899,12 @@ EOF
 	#endif
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
     mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -870,17 +922,21 @@ EOF
 	#endif
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
     or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
+	echo or32-unknown-linux-${LIBC}
 	exit ;;
     ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
+	echo powerpc-unknown-linux-${LIBC}
 	exit ;;
     ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
+	echo powerpc64-unknown-linux-${LIBC}
 	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
@@ -893,34 +949,40 @@ EOF
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
         esac
 	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
 	esac
 	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
+	echo hppa64-unknown-linux-${LIBC}
 	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
 	echo ${UNAME_MACHINE}-ibm-linux
 	exit ;;
     sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+    	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
 	exit ;;
     x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
+	echo x86_64-unknown-linux-${LIBC}
+	exit ;;
+    xtensa*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
@@ -935,20 +997,22 @@ EOF
 				    p'`
         case "$ld_supported_targets" in
 	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-${LIBC}"
 		;;
 	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}aout"
 		exit ;;
 	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}coff"
 		exit ;;
 	  "")
 		# Either a pre-BFD a.out linker (linux-gnuoldld) or
 		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}oldld"
 		exit ;;
 	esac
+	# This should get integrated into the C code below, but now we hack
+	if [ "$LIBC" != "gnu" ] ; then echo "$TENTATIVE" && exit 0 ; fi
 	# Determine whether the default compiler is a.out or elf
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -964,7 +1028,7 @@ EOF
 	LIBC=gnulibc1
 	# endif
 	#else
-	#ifdef __INTEL_COMPILER
+	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
 	LIBC=gnu
 	#else
 	LIBC=gnuaout
@@ -974,7 +1038,11 @@ EOF
 	LIBC=dietlibc
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^LIBC/{
+		s: ::g
+		p
+	    }'`"
 	test x"${LIBC}" != x && {
 		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
 		exit
@@ -1176,6 +1244,15 @@ EOF
     SX-6:SUPER-UX:*:*)
 	echo sx6-nec-superux${UNAME_RELEASE}
 	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
 	exit ;;
@@ -1185,7 +1262,6 @@ EOF
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
 	case $UNAME_PROCESSOR in
-	    *86) UNAME_PROCESSOR=i686 ;;
 	    unknown) UNAME_PROCESSOR=powerpc ;;
 	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
@@ -1264,6 +1340,9 @@ EOF
     i*86:skyos:*:*)
 	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
 	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
@@ -1424,9 +1503,9 @@ This script, last modified $timestamp, has failed to recognize
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
 
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 and
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
 
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be

config/config.sub

@@ -1,9 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   Free Software Foundation, Inc.
 
-timestamp='2005-07-08'
+timestamp='2008-01-16'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -71,8 +72,8 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -119,8 +120,9 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
-  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -171,6 +173,10 @@ case $os in
 	-hiux*)
 		os=-hiuxwe2
 		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco5)
 		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -187,6 +193,10 @@ case $os in
 		# Don't forget version if it is 3.2v4 or newer.
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco*)
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -231,15 +241,16 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
 	| bfin \
 	| c4x | clipper \
-	| d10v | d30v | dlx | dsp16xx \
-	| fr30 | frv \
+	| d10v | d30v | dlx | dsp16xx | dvp \
+	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -257,28 +268,27 @@ case $basic_machine in
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
-	| ms1 \
+	| mt \
 	| msp430 \
+	| nios | nios2 \
 	| ns16k | ns32k \
 	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]a*eb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b \
-	| strongarm \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu | strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
-	m32c)
-		basic_machine=$basic_machine-unknown
-		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
 		# Motorola 68HC11/12.
 		basic_machine=$basic_machine-unknown
@@ -286,6 +296,9 @@ case $basic_machine in
 		;;
 	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
 
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
@@ -305,18 +318,18 @@ case $basic_machine in
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
+	| avr-* | avr32-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
-	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| m32r-* | m32rle-* \
+	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
 	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
@@ -336,30 +349,33 @@ case $basic_machine in
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
-	| ms1-* \
+	| mt-* \
 	| msp430-* \
+	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]a*eb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
-	| xstormy16-* | xtensa-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa*-* \
 	| ymp-* \
 	| z8k-*)
 		;;
-	m32c-*)
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
@@ -431,6 +447,14 @@ case $basic_machine in
 		basic_machine=ns32k-sequent
 		os=-dynix
 		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
@@ -463,8 +487,8 @@ case $basic_machine in
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16c)
-		basic_machine=cr16c-unknown
+	cr16)
+		basic_machine=cr16-unknown
 		os=-elf
 		;;
 	crds | unos)
@@ -656,6 +680,14 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	m88k-omron*)
 		basic_machine=m88k-omron
 		;;
@@ -671,6 +703,10 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-mingw32
 		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
@@ -678,6 +714,24 @@ case $basic_machine in
 		basic_machine=m68k-atari
 		os=-mint
 		;;
+	mipsEE* | ee | ps2)
+		basic_machine=mips64r5900el-scei
+		case $os in
+		    -linux*)
+			;;
+		    *)
+			os=-elf
+			;;
+		esac
+		;;
+	iop)
+		basic_machine=mipsel-scei
+		os=-irx
+		;;
+	dvp)
+		basic_machine=dvp-scei
+		os=-elf
+		;;
 	mips3*-*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
 		;;
@@ -696,6 +750,9 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-msdos
 		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
@@ -794,6 +851,14 @@ case $basic_machine in
 		basic_machine=i860-intel
 		os=-osf
 		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	pbd)
 		basic_machine=sparc-tti
 		;;
@@ -803,6 +868,12 @@ case $basic_machine in
 	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
@@ -859,6 +930,10 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
 	rom68k)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -885,6 +960,10 @@ case $basic_machine in
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
 	sei)
 		basic_machine=mips-sei
 		os=-seiux
@@ -896,6 +975,9 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
 	sh64)
 		basic_machine=sh64-unknown
 		;;
@@ -985,6 +1067,10 @@ case $basic_machine in
 		basic_machine=tic6x-unknown
 		os=-coff
 		;;
+	tile*)
+		basic_machine=tile-unknown
+		os=-linux-gnu
+		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -1101,7 +1187,7 @@ case $basic_machine in
 	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b)
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1174,21 +1260,23 @@ case $os in
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -irx*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1340,6 +1428,12 @@ else
 # system, and we'll never get to this point.
 
 case $basic_machine in
+        score-*)
+		os=-elf
+		;;
+        spu-*)
+		os=-elf
+		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@@ -1377,6 +1471,9 @@ case $basic_machine in
 	m68*-cisco)
 		os=-aout
 		;;
+        mep-*)
+		os=-elf
+		;;
 	mips*-cisco)
 		os=-elf
 		;;

config/depcomp

@@ -1,9 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2005-07-09.11
+scriptversion=2007-03-29.01
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
+# Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -91,7 +92,20 @@ gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
 ## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
 ## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
   stat=$?
   if test $stat -eq 0; then :
   else
@@ -201,34 +215,39 @@ aix)
   # current directory.  Also, the AIX compiler puts `$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
   stat=$?
 
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
   if test $stat -eq 0; then :
   else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
   if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -276,6 +295,46 @@ icc)
   rm -f "$tmpdepfile"
   ;;
 
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
 tru64)
    # The Tru64 compiler uses -MD to generate dependencies as a side
    # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
@@ -288,13 +347,13 @@ tru64)
 
    if test "$libtool" = yes; then
       # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mecanism is used in libtool 1.4 series to
+      # static library.  This mechanism is used in libtool 1.4 series to
       # handle both shared and static libraries in a single compilation.
       # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
       #
       # With libtool 1.5 this exception was removed, and libtool now
       # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in in $dir.libs/$base.o.d and
+      # compilations output dependencies in $dir.libs/$base.o.d and
       # in $dir$base.o.d.  We have to check for both files, because
       # one of the two compilations can be disabled.  We should prefer
       # $dir$base.o.d over $dir.libs/$base.o.d because the latter is

config/install-sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2005-05-14.22
+scriptversion=2006-12-25.00
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,38 +39,68 @@ scriptversion=2005-05-14.22
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
 
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
 
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
 
-chmodcmd="$chmodprog 0755"
-chowncmd=
 chgrpcmd=
-stripcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
 src=
 dst=
 dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
 no_target_directory=
 
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
    or: $0 [OPTION]... -t DIRECTORY SRCFILES...
    or: $0 [OPTION]... -d DIRECTORIES...
@@ -80,81 +110,86 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
 In the 4th, create DIRECTORIES.
 
 Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
 "
 
-while test -n "$1"; do
+while test $# -ne 0; do
   case $1 in
-    -c) shift
-        continue;;
+    -c) ;;
 
-    -d) dir_arg=true
-        shift
-        continue;;
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
     --help) echo "$usage"; exit $?;;
 
-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
 
     -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
+    -s) stripcmd=$stripprog;;
 
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
+    -t) dst_arg=$2
+	shift;;
 
-    -T) no_target_directory=true
-	shift
-	continue;;
+    -T) no_target_directory=true;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
-    *)  # When -d is used, all remaining arguments are directories to create.
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
-	test -n "$dir_arg$dstarg" && break
   # Otherwise, the last argument is the destination.  Remove it from $@.
   for arg
   do
-          if test -n "$dstarg"; then
+    if test -n "$dst_arg"; then
       # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
+      set fnord "$@" "$dst_arg"
       shift # fnord
     fi
     shift # arg
-	  dstarg=$arg
+    dst_arg=$arg
   done
-	break;;
-  esac
-done
+fi
 
-if test -z "$1"; then
+if test $# -eq 0; then
   if test -z "$dir_arg"; then
     echo "$0: no input file specified." >&2
     exit 1
@@ -164,24 +199,47 @@ if test -z "$1"; then
   exit 0
 fi
 
+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
 for src
 do
   # Protect names starting with `-'.
   case $src in
-    -*) src=./$src ;;
+    -*) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
     dst=$src
-    src=
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
 
-    if test -d "$dst"; then
-      mkdircmd=:
-      chmodcmd=
-    else
-      mkdircmd=$mkdirprog
-    fi
-  else
     # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
     # might cause directories to be created, which would be especially bad
     # if $src (and thus $dsttmp) contains '*'.
@@ -190,71 +248,199 @@ do
       exit 1
     fi
 
-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
       echo "$0: no destination specified." >&2
       exit 1
     fi
 
-    dst=$dstarg
+    dst=$dst_arg
     # Protect names starting with `-'.
     case $dst in
-      -*) dst=./$dst ;;
+      -*) dst=./$dst;;
     esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
       if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
+	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
       fi
-      dst=$dst/`basename "$src"`
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
     fi
   fi
 
-  # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+  obsolete_mkdir_used=false
 
-  # Make sure that the destination directory exists.
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
 
-  # Skip lots of stat calls in the usual case.
-  if test ! -d "$dstdir"; then
-    defaultIFS='
-	 '
-    IFS="${IFS-$defaultIFS}"
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
 
       oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
-    IFS='%'
-    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
       shift
+      $posix_glob set +f
       IFS=$oIFS
 
-    pathcomp=
+      prefixes=
 
-    while test $# -ne 0 ; do
-      pathcomp=$pathcomp$1
-      shift
-      if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp"
-	# mkdir can fail with a `File exist' error in case several
-	# install-sh are creating the directory concurrently.  This
-	# is OK.
-	test -d "$pathcomp" || exit
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
 	  fi
-      pathcomp=$pathcomp/
+	fi
+	prefix=$prefix/
       done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
   fi
 
   if test -n "$dir_arg"; then
-    $doit $mkdircmd "$dst" \
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
   else
-    dstfile=`basename "$dst"`
 
     # Make a couple of temp file names in the proper directory.
     dsttmp=$dstdir/_inst.$$_
@@ -262,10 +448,9 @@ do
 
     # Trap to clean up those temp files at exit.
     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-    trap '(exit $?); exit' 1 2 13 15
 
     # Copy the file name to the temp name.
-    $doit $cpprog "$src" "$dsttmp" &&
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
@@ -273,47 +458,58 @@ do
     # ignore errors from any of these, just make sure not to ignore
     # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
 
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-      || {
       # The rename failed, perhaps because mv can't rename something else
       # to itself, or perhaps because mv is so ancient that it does not
       # support -f.
-
+      {
 	# Now remove or move aside any old file at destination location.
 	# We try this two ways since rm can't unlink itself on some
 	# systems and the destination file might be busy for other
 	# reasons.  In this case, the final cleanup might fail but the new
 	# file should still install successfully.
 	{
-	     if test -f "$dstdir/$dstfile"; then
-	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-	       || {
-		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
 	    (exit 1); exit 1
 	  }
-	     else
-	       :
-	     fi
 	} &&
 
 	# Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	$doit $mvcmd "$dsttmp" "$dst"
       }
-    }
-  fi || { (exit 1); exit 1; }
-done
+    fi || exit 1
 
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit 0
-}
+    trap '' 0
+  fi
+done
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)

config/missing

@@ -1,9 +1,9 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2005-06-08.21
+scriptversion=2006-05-10.23
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
 #   Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
@@ -33,6 +33,8 @@ if test $# -eq 0; then
 fi
 
 run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 
 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
@@ -44,7 +46,7 @@ fi
 
 msg="missing on your system"
 
-case "$1" in
+case $1 in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
@@ -77,6 +79,7 @@ Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'
   autoconf     touch file \`configure'
   autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
@@ -106,7 +109,7 @@ esac
 # Now exit if we have it, but it failed.  Also exit now if we
 # don't have it and --version was passed (most likely to detect
 # the program).
-case "$1" in
+case $1 in
   lex|yacc)
     # Not GNU programs, they don't have --version.
     ;;
@@ -135,7 +138,7 @@ esac
 
 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
-case "$1" in
+case $1 in
   aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
@@ -164,7 +167,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
-      case "$f" in
+      case $f in
       *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
       *) touch_files="$touch_files $f.in";;
@@ -192,8 +195,8 @@ WARNING: \`$1' is needed, but is $msg.
          You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
 
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -f "$file"; then
 	touch $file
     else
@@ -214,25 +217,25 @@ WARNING: \`$1' $msg.  You should only need it if
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f y.tab.h ]; then
+    if test ! -f y.tab.h; then
 	echo >y.tab.h
     fi
-    if [ ! -f y.tab.c ]; then
+    if test ! -f y.tab.c; then
 	echo 'main() { return 0; }' >y.tab.c
     fi
     ;;
@@ -244,18 +247,18 @@ WARNING: \`$1' is $msg.  You should only need it if
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f lex.yy.c ]; then
+    if test ! -f lex.yy.c; then
 	echo 'main() { return 0; }' >lex.yy.c
     fi
     ;;
@@ -267,11 +270,9 @@ WARNING: \`$1' is $msg.  You should only need it if
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
 
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
 	touch $file
     else
 	test -z "$file" || exec >$file
@@ -289,11 +290,17 @@ WARNING: \`$1' is $msg.  You should only need it if
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
     # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -z "$file"; then
       # ... or it is the one specified with @setfilename ...
       infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
       # ... or it is derived from the source name (dir/f.texi becomes f.info)
       test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
@@ -317,13 +324,13 @@ WARNING: \`$1' is $msg.  You should only need it if
     fi
     firstarg="$1"
     if shift; then
-	case "$firstarg" in
+	case $firstarg in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
-	case "$firstarg" in
+	case $firstarg in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0

configure.in

@@ -2,9 +2,11 @@
 # Process this file with autoconf to produce a configure script.
 
 AC_PREREQ(2.59)
-AC_INIT(libg15, 1.2.2, mlampard@users.sourceforge.net)
+AC_INIT(libg15, 1.2.7, mlampard@users.sourceforge.net)
 AC_PREFIX_DEFAULT(/usr)
 AC_CONFIG_AUX_DIR(config)
+AC_CANONICAL_TARGET()
+
 AM_INIT_AUTOMAKE()
 AC_CONFIG_SRCDIR([libg15.c])
 AC_CONFIG_HEADER([config.h])
@@ -13,9 +15,29 @@ AC_CONFIG_HEADER([config.h])
 AC_PROG_CC
 AC_PROG_LIBTOOL
 
+case $host_os in
+	*linux*) 
+	  AC_DEFINE([OSTYPE_LINUX], [1],[Target OS is Linux])
+	  ;;
+	*darwin*)
+	  AC_DEFINE([OSTYPE_DARWIN], [1],[Target OS is Darwin])
+	  ;;
+        *solaris*)
+          AC_DEFINE([OSTYPE_SOLARIS], [1],[Target OS is Solaris])
+	  AC_SEARCH_LIBS([nanosleep],rt,[],[],[])
+          AC_DEFINE(SUN_LIBUSB, 1, [Define to 1 for Sun version of libusb.])
+	  libusb_blocks=true	  
+	  ;;
+esac
+
 # Checks for libraries.
 AC_CHECK_LIB([usb], [main], ,AC_MSG_ERROR(["libusb not found. please install it"]))
 
+dnl Some versions of libusb do not honour timeout and block. Suns' version is one of them.
+if test "x$libusb_blocks" == "xtrue"; then
+      AC_DEFINE([LIBUSB_BLOCKS], [1],[Define if libusb implementation blocks on read or write])
+fi
+
 # Checks for header files.
 AC_HEADER_STDC
 AC_CHECK_HEADERS([string.h])

debian/README.Debian

@@ -1,10 +0,0 @@
-libg15 for Debian
------------------
-
-Notes about hardware
-
-Notes about configuration of other packages
-
-
-
- -- Giacomo Catenazzi <cate@debian.org>  Mon, 27 Aug 2007 07:56:10 +0200

debian/changelog

@@ -1,3 +1,57 @@
+libg15 (1.2.7-3) unstable; urgency=medium
+
+  * Reintroduce package (Closes: #928159).
+  * New maintainer.
+  * Remove redundant documentation files.
+  * debian/patches/00-fix-reinit.patch: fix re_initLibG15() to properly reset
+    internal state, allowing g15daemon to continue working after keyboard was
+    replugged and after suspend or hibernate (LP: #1357556).
+  * Use 3.0 (quilt) source format.
+  * Switch to dh from cdbs.
+  * Drop redundant build dependencies.
+  * Update the homepage.
+  * Multiarchify the package.
+
+ -- Alexander Ponyatykh <lazyranma@gmail.com>  Fri, 10 May 2019 11:45:05 +0200
+
+libg15 (1.2.7-2) unstable; urgency=low
+
+  * add list-missing to debian/rules
+  * Don't export the .la file (see debian-devel@l.d.o)
+  * We are conformant to policy 2.8.3
+
+ -- Giacomo Catenazzi <cate@debian.org>  Thu, 10 Sep 2009 08:19:39 +0200
+
+libg15 (1.2.7-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Wed, 22 Apr 2009 07:24:53 +0200
+
+libg15 (1.2.6-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Mon, 28 Jan 2008 07:58:11 +0100
+
+libg15 (1.2.5-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Wed, 09 Jan 2008 08:06:33 +0100
+
+libg15 (1.2.4-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Tue, 18 Dec 2007 08:08:43 +0100
+
+libg15 (1.2.3-1) unstable; urgency=low
+
+  * New upstrem version: add support of new g15 keyboards
+
+ -- Giacomo Catenazzi <cate@debian.org>  Thu, 15 Nov 2007 07:44:43 +0100
+
 libg15 (1.2.2-1) unstable; urgency=low
 
   * Initial release

debian/compat

@@ -1 +1 @@
-5
+12

debian/control

@@ -1,13 +1,15 @@
 Source: libg15
 Section: libs
 Priority: optional
-Maintainer: Giacomo Catenazzi <cate@debian.org>
-Build-Depends: cdbs, debhelper (>= 5), autotools-dev, libusb-dev
-Standards-Version: 3.7.2
+Maintainer: Alexander Ponyatykh <lazyranma@gmail.com>
+Build-Depends: debhelper (>=12), libusb-dev
+Standards-Version: 4.3.0
+Homepage: https://sourceforge.net/projects/g15tools/
 
 Package: libg15-1
 Section: libs
 Architecture: any
+Multi-Arch: same
 Depends: ${shlibs:Depends}, ${misc:Depends}
 Description: Library for interfacing with the Logitech G15 keyboards
  libg15 provides an API for low level control of the LCD display and
@@ -17,8 +19,9 @@ Description: Library for interfacing with the Logitech G15 keyboards
 
 Package: libg15-dev
 Section: libdevel
-Depends: libg15-1 (= ${binary:Version})
+Depends: libg15-1 (= ${binary:Version}), ${misc:Depends}
 Architecture: any
+Multi-Arch: same
 Description: Library for interfacing with the Logitech G15 keyboards
  libg15 provides an API for low level control of the LCD display and
  the extra keys on some Logitech keyboards (G11, G15).

debian/libg15-1.install

@@ -1 +1 @@
-debian/tmp/usr/lib/lib*.so.* usr/lib/
+debian/tmp/usr/lib/*/lib*.so.*

debian/libg15-dev.install

@@ -1,5 +1,3 @@
-debian/tmp/usr/include/* usr/include/
-debian/tmp/usr/lib/lib*.a usr/lib/
-debian/tmp/usr/lib/lib*.so usr/lib/
-debian/tmp/usr/lib/*.la usr/lib/
-
+debian/tmp/usr/include/*
+debian/tmp/usr/lib/*/lib*.a
+debian/tmp/usr/lib/*/lib*.so

debian/libg15.install

@@ -1 +1 @@
-usr/lib/libg15*.so.*
+usr/lib/*/libg15*.so.*

debian/patches/00-fix-reinit.patch

@@ -0,0 +1,85 @@
+Description: fix re_initLibG15() to properly reset internal state.
+Author: Alexander Ponyatykh <lazyranma@gmail.com>
+Bug-Ubuntu: https://bugs.launchpad.net/ubuntu/+source/libusb/+bug/1357556
+Forwarded: no
+Last-Update: 2015-05-17
+===================================================================
+--- a/libg15.c
++++ b/libg15.c
+@@ -275,19 +275,36 @@
+     return keyboard_device;
+ }
+ 
++/* reset the keyboard, returning it to a known state */
++static int closeKeyboardDevice()
++{
++    int retval = G15_NO_ERROR;
++
++    enospc_slowdown = shared_device = g15_keys_endpoint = g15_lcd_endpoint = 0;
++    found_devicetype = -1;
++
++    if (keyboard_device){
++#ifndef SUN_LIBUSB
++        retval = usb_release_interface (keyboard_device, 0);
++        usleep(50*1000);
++#endif
++#if 0
++        retval = usb_reset(keyboard_device);
++        usleep(50*1000);
++#endif
++        usb_close(keyboard_device);
++        keyboard_device=0;
++        return retval;
++    }
++    return -1;
++}
+ 
+ int re_initLibG15()
+ {
++    closeKeyboardDevice();
+ 
+-    usb_init();
+-
+-  /**
+-     *  usb_find_busses and usb_find_devices both report the number of devices
+-     *  / busses added / removed since the last call. since this is the first
+-   *  call we have to return values != 0 or else we didnt find anything */
+-     
+-    if (!usb_find_devices())
+-        return G15_ERROR_OPENING_USB_DEVICE;
++    usb_find_busses();
++    usb_find_devices();
+   
+     keyboard_device = findAndOpenG15();
+     if (!keyboard_device)
+@@ -319,28 +336,12 @@
+     return retval;
+ }
+ 
+-/* reset the keyboard, returning it to a known state */
+ int exitLibG15()
+ {
+-    int retval = G15_NO_ERROR;
+-    if (keyboard_device){
+-#ifndef SUN_LIBUSB
+-        retval = usb_release_interface (keyboard_device, 0);
+-        usleep(50*1000);
+-#endif
+-#if 0
+-        retval = usb_reset(keyboard_device);
+-        usleep(50*1000);
+-#endif
+-        usb_close(keyboard_device);
+-        keyboard_device=0;
+-        pthread_mutex_destroy(&libusb_mutex);
+-        return retval;
+-    }
+-    return -1;
++    pthread_mutex_destroy(&libusb_mutex);
++    return closeKeyboardDevice();
+ }
+ 
+-
+ static void dumpPixmapIntoLCDFormat(unsigned char *lcd_buffer, unsigned char const *data)
+ {
+ /*

debian/patches/series

@@ -0,0 +1 @@
+00-fix-reinit.patch

debian/rules

@@ -1,8 +1,11 @@
 #!/usr/bin/make -f
 
+DH_VERBOSE = 1
+
 DEB_DH_MAKESHLIBS_ARGS_libg15 := --version-info
 
-include /usr/share/cdbs/1/rules/debhelper.mk
-include /usr/share/cdbs/1/class/autotools.mk
-
+%:
+	dh $@
 
+override_dh_makeshlibs:
+	dh_makeshlibs --version-info=None

debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/watch

@@ -3,5 +3,5 @@
 # Compulsory line, this is a version 3 file
 version=3
 
-http://sf.net/g15tools libg15-(.*)\.tar\.bz2
+http://sf.net/g15tools libg15-(.*)\.tar\.gz
 

libg15.c

@@ -12,8 +12,12 @@
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with g15lcd; if not, write to the Free Software
+    along with libg15; if not, write to the Free Software
     Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+    (c) 2006-2007 The G15tools Project - g15tools.sf.net
+    
+    $Revision: 292 $ -  $Date: 2008-11-11 08:51:25 -0500 (Tue, 11 Nov 2008) $ $Author: aneurysm9 $
 */
 
 #include <pthread.h>
@@ -23,6 +27,7 @@
 #include <usb.h>
 #include <string.h>
 #include <errno.h>
+#include "config.h"
 
 static usb_dev_handle *keyboard_device = 0;
 static int libg15_debugging_enabled = 0;
@@ -34,13 +39,14 @@ static int g15_keys_endpoint = 0;
 static int g15_lcd_endpoint = 0;
 static pthread_mutex_t libusb_mutex;
 
-
 /* to add a new device, simply create a new DEVICE() in this list */
 /* Fields are: "Name",VendorID,ProductID,Capabilities */
 const libg15_devices_t g15_devices[] = {
     DEVICE("Logitech G15",0x46d,0xc222,G15_LCD|G15_KEYS),
     DEVICE("Logitech G11",0x46d,0xc225,G15_KEYS),
     DEVICE("Logitech Z-10",0x46d,0x0a07,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED),
+    DEVICE("Logitech G15 v2",0x46d,0xc227,G15_LCD|G15_KEYS|G15_DEVICE_5BYTE_RETURN),
+    DEVICE("Logitech Gamepanel",0x46d,0xc251,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED),
     DEVICE(NULL,0,0,0)
 };
 
@@ -191,7 +197,7 @@ static usb_dev_handle * findAndOpenDevice(libg15_devices_t handled_device, int d
                                     }
                                     else
                                     {
-                                        g15_log(stderr,G15_LOG_INFO,"Sorry, I could not detached the driver, giving up\n");
+                                        g15_log(stderr,G15_LOG_INFO,"Sorry, I could not detach the driver, giving up\n");
                                         return 0;
                                     }
 
@@ -297,6 +303,12 @@ int initLibG15()
     if (retval)
         return retval;
 
+    g15_log(stderr,G15_LOG_INFO,"%s\n",PACKAGE_STRING);
+    
+#ifdef SUN_LIBUSB
+    g15_log(stderr,G15_LOG_INFO,"Using Sun libusb.\n");
+#endif
+
     g15NumberOfConnectedDevices();
   
     keyboard_device = findAndOpenG15();
@@ -312,8 +324,10 @@ int exitLibG15()
 {
     int retval = G15_NO_ERROR;
     if (keyboard_device){
+#ifndef SUN_LIBUSB
         retval = usb_release_interface (keyboard_device, 0);
         usleep(50*1000);
+#endif
 #if 0
         retval = usb_reset(keyboard_device);
         usleep(50*1000);
@@ -329,36 +343,84 @@ int exitLibG15()
 
 static void dumpPixmapIntoLCDFormat(unsigned char *lcd_buffer, unsigned char const *data)
 {
-    unsigned int offset_from_start = G15_LCD_OFFSET;
+/*
+
+  For a set of bytes (A, B, C, etc.) the bits representing pixels will appear on the LCD like this:
+	
+	A0 B0 C0
+	A1 B1 C1
+	A2 B2 C2
+	A3 B3 C3 ... and across for G15_LCD_WIDTH bytes
+	A4 B4 C4
+	A5 B5 C5
+	A6 B6 C6
+	A7 B7 C7
+	
+	A0
+	A1  <- second 8-pixel-high row starts straight after the last byte on
+	A2     the previous row
+	A3
+	A4
+	A5
+	A6
+	A7
+	A8
+
+	A0
+	...
+	A0
+	...
+	A0
+	...
+	A0
+	A1 <- only the first three bits are shown on the bottom row (the last three
+	A2    pixels of the 43-pixel high display.)
+	
+
+*/
+
+    unsigned int output_offset = G15_LCD_OFFSET;
+    unsigned int base_offset = 0;
     unsigned int curr_row = 0;
     unsigned int curr_col = 0;
 
-    for (curr_row=0;curr_row<G15_LCD_HEIGHT;++curr_row)
-    {
-        for (curr_col=0;curr_col<G15_LCD_WIDTH;++curr_col)
-        {
-            unsigned int pixel_offset = curr_row*G15_LCD_WIDTH + curr_col;
-            unsigned int byte_offset = pixel_offset / 8;
-            unsigned int bit_offset = pixel_offset % 8;
-            unsigned int val = data[byte_offset] & 1<<(7-bit_offset);
-      
-            unsigned int row = curr_row / 8;
-            unsigned int offset = G15_LCD_WIDTH*row + curr_col;
-            unsigned int bit = curr_row % 8;
-    
-/*
-            if (val)
-            printf("Setting pixel at row %d col %d to %d offset %d bit %d\n",curr_row,curr_col, val, offset, bit);
+    /* Five 8-pixel rows + a little 3-pixel row.  This formula will calculate
+       the minimum number of bytes required to hold a complete column.  (It
+       basically divides by eight and rounds up the result to the nearest byte,
+       but at compile time.
       */
-            if (val)
-                lcd_buffer[offset_from_start + offset] = lcd_buffer[offset_from_start + offset] | 1 << bit;
-            else
-                lcd_buffer[offset_from_start + offset] = lcd_buffer[offset_from_start + offset]  &  ~(1 << bit);
+
+#define G15_LCD_HEIGHT_IN_BYTES  ((G15_LCD_HEIGHT + ((8 - (G15_LCD_HEIGHT % 8)) % 8)) / 8)
+
+    for (curr_row = 0; curr_row < G15_LCD_HEIGHT_IN_BYTES; ++curr_row)
+    {
+        for (curr_col = 0; curr_col < G15_LCD_WIDTH; ++curr_col)
+        {
+            unsigned int bit = curr_col % 8;
+		/* Copy a 1x8 column of pixels across from the source image to the LCD buffer. */
+		
+            lcd_buffer[output_offset] =
+			(((data[base_offset                        ] << bit) & 0x80) >> 7) |
+			(((data[base_offset +  G15_LCD_WIDTH/8     ] << bit) & 0x80) >> 6) |
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 2)] << bit) & 0x80) >> 5) |
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 3)] << bit) & 0x80) >> 4) |
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 4)] << bit) & 0x80) >> 3) |
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 5)] << bit) & 0x80) >> 2) |
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 6)] << bit) & 0x80) >> 1) |
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 7)] << bit) & 0x80) >> 0);
+            ++output_offset;
+            if (bit == 7)
+              base_offset++;
         }
+	/* Jump down seven pixel-rows in the source image, since we've just
+	   done a row of eight pixels in one pass (and we counted one pixel-row
+  	   while we were going, so now we skip the next seven pixel-rows.) */
+	base_offset += G15_LCD_WIDTH - (G15_LCD_WIDTH / 8);
     }
 }
 
 int handle_usb_errors(const char *prefix, int ret) {
+
     switch (ret){
         case -ETIMEDOUT:
             return G15_ERROR_READING_USB_DEVICE;  /* backward-compatibility */
@@ -373,7 +435,7 @@ int handle_usb_errors(const char *prefix, int ret) {
             case -EAGAIN: /* try again */
             case -EFBIG: /* too many frames to handle */
             case -EMSGSIZE: /* msgsize is invalid */
-                 g15_log(stderr,G15_LOG_INFO,"usb error: %s (%i)\n",prefix,ret);     
+                 g15_log(stderr,G15_LOG_INFO,"usb error: %s %s (%i)\n",prefix,usb_strerror(),ret);     
                  break;
             case -EPIPE: /* endpoint is stalled */
                  g15_log(stderr,G15_LOG_INFO,"usb error: %s EPIPE! clearing...\n",prefix);     
@@ -382,7 +444,7 @@ int handle_usb_errors(const char *prefix, int ret) {
                  pthread_mutex_unlock(&libusb_mutex);
                  break;
             default: /* timed out */
-                 g15_log(stderr,G15_LOG_INFO,"Unknown usb error: %s !! (err is %i)\n",prefix,ret);     
+                 g15_log(stderr,G15_LOG_INFO,"Unknown usb error: %s !! (err is %i (%s))\n",prefix,ret,usb_strerror());
     }
     return ret;
 }
@@ -392,7 +454,10 @@ int writePixmapToLCD(unsigned char const *data)
     int ret = 0;
     int transfercount=0;
     unsigned char lcd_buffer[G15_BUFFER_LEN];
-    memset(lcd_buffer,0,G15_BUFFER_LEN);
+    /* The pixmap conversion function will overwrite everything after G15_LCD_OFFSET, so we only need to blank
+       the buffer up to this point.  (Even though the keyboard only cares about bytes 0-23.) */
+    memset(lcd_buffer, 0, G15_LCD_OFFSET);  /* G15_BUFFER_LEN); */
+
     dumpPixmapIntoLCDFormat(lcd_buffer, data);
 
     if(!(g15_devices[found_devicetype].caps & G15_LCD))
@@ -406,7 +471,9 @@ int writePixmapToLCD(unsigned char const *data)
     I'm not sure how successful this will be in combatting ENOSPC, but we'll give it try in the real-world. */
 
     if(enospc_slowdown != 0){
+#ifndef LIBUSB_BLOCKS
         pthread_mutex_lock(&libusb_mutex);  
+#endif
         for(transfercount = 0;transfercount<=31;transfercount++){
             ret = usb_interrupt_write(keyboard_device, g15_lcd_endpoint, (char*)lcd_buffer+(32*transfercount), 32, 1000);
             if (ret != 32)
@@ -416,12 +483,18 @@ int writePixmapToLCD(unsigned char const *data)
             }
             usleep(100);
         }
+#ifndef LIBUSB_BLOCKS
         pthread_mutex_unlock(&libusb_mutex);
+#endif        
     }else{
         /* transfer entire buffer in one hit */
+#ifdef LIBUSB_BLOCKS
+        ret = usb_interrupt_write(keyboard_device, g15_lcd_endpoint, (char*)lcd_buffer, G15_BUFFER_LEN, 1000);
+#else
         pthread_mutex_lock(&libusb_mutex);
         ret = usb_interrupt_write(keyboard_device, g15_lcd_endpoint, (char*)lcd_buffer, G15_BUFFER_LEN, 1000);
         pthread_mutex_unlock(&libusb_mutex);
+#endif
         if (ret != G15_BUFFER_LEN)
         {
             handle_usb_errors ("LCDPixmap Write",ret);
@@ -538,7 +611,7 @@ static unsigned char g15KeyToLogitechKeyCode(int key)
     }
 }
 
-static void processKeyEvent(unsigned int *pressed_keys, unsigned char *buffer)
+static void processKeyEvent9Byte(unsigned int *pressed_keys, unsigned char *buffer)
 {
     int i;
   
@@ -629,22 +702,91 @@ static void processKeyEvent(unsigned int *pressed_keys, unsigned char *buffer)
     }
 }
 
+static void processKeyEvent5Byte(unsigned int *pressed_keys, unsigned char *buffer)
+{
+    int i;
+  
+    *pressed_keys = 0;
+  
+    g15_log(stderr,G15_LOG_WARN,"Keyboard: %x, %x, %x, %x, %x\n",buffer[0],buffer[1],buffer[2],buffer[3],buffer[4]);
+  
+    if (buffer[0] == 0x02)
+    {
+        if (buffer[1]&0x01)
+            *pressed_keys |= G15_KEY_G1;
+    
+        if (buffer[1]&0x02)
+            *pressed_keys |= G15_KEY_G2;
+
+        if (buffer[1]&0x04)
+            *pressed_keys |= G15_KEY_G3;
+
+        if (buffer[1]&0x08)
+            *pressed_keys |= G15_KEY_G4;
+
+        if (buffer[1]&0x10)
+            *pressed_keys |= G15_KEY_G5;
+
+        if (buffer[1]&0x20)
+            *pressed_keys |= G15_KEY_G6;
+            
+        if (buffer[1]&0x40)
+            *pressed_keys |= G15_KEY_M1;
+            
+        if (buffer[1]&0x80)
+            *pressed_keys |= G15_KEY_M2;
+            
+        if (buffer[2]&0x20)
+            *pressed_keys |= G15_KEY_M3;
+            
+        if (buffer[2]&0x40)
+            *pressed_keys |= G15_KEY_MR;
+
+        if (buffer[2]&0x80)
+            *pressed_keys |= G15_KEY_L1;
+            
+        if (buffer[2]&0x2)
+            *pressed_keys |= G15_KEY_L2;
+            
+        if (buffer[2]&0x4)
+            *pressed_keys |= G15_KEY_L3;
+
+        if (buffer[2]&0x8)
+            *pressed_keys |= G15_KEY_L4;
+            
+        if (buffer[2]&0x10)
+            *pressed_keys |= G15_KEY_L5;
+            
+        if (buffer[2]&0x1)
+            *pressed_keys |= G15_KEY_LIGHT;
+    }
+}
+
+
 int getPressedKeys(unsigned int *pressed_keys, unsigned int timeout)
 {
-    unsigned char buffer[9];
+    unsigned char buffer[G15_KEY_READ_LENGTH];
     int ret = 0;
+#ifdef LIBUSB_BLOCKS
+    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, G15_KEY_READ_LENGTH, timeout);
+#else
     pthread_mutex_lock(&libusb_mutex);
-    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, 9, timeout);
+    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, G15_KEY_READ_LENGTH, timeout);
     pthread_mutex_unlock(&libusb_mutex);
-   
-    if (ret == 9)
-    {
-        if (buffer[0] == 1)
+#endif
+    if(ret>0) {
+      if(buffer[0] == 1)
         return G15_ERROR_TRY_AGAIN;    
-    
-        processKeyEvent(pressed_keys, buffer);
-    
-        return G15_NO_ERROR;
     }
+
+    switch(ret) {
+      case 5:
+          processKeyEvent5Byte(pressed_keys, buffer);
+          return G15_NO_ERROR;
+      case 9:
+          processKeyEvent9Byte(pressed_keys, buffer);
+          return G15_NO_ERROR;
+      default:
           return handle_usb_errors("Keyboard Read", ret); /* allow the app to deal with errors */
+    }
 }

libg15.h

@@ -14,6 +14,10 @@
     You should have received a copy of the GNU General Public License
     along with g15lcd; if not, write to the Free Software
     Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+    
+    (c) 2006 - 2007 The G15tools Project - g15tools.sf.net
+    
+    $Revision: 292 $ -  $Date: 2008-11-11 08:51:25 -0500 (Tue, 11 Nov 2008) $ $Author: aneurysm9 $
 */
 
 #ifndef _LIBG15_H_
@@ -27,6 +31,9 @@ extern "C"
 #define G15_LCD 1
 #define G15_KEYS 2
 #define G15_DEVICE_IS_SHARED 4
+#define G15_DEVICE_5BYTE_RETURN 8
+
+#define G15_KEY_READ_LENGTH 9
 
 typedef struct libg15_devices_t libg15_devices_t;
 

rpm/libg15.spec

@@ -3,11 +3,11 @@
 %define prefix	/usr
 Summary: library to control logitech G15 keyboards
 Name: libg15
-Version: 1.2.2
+Version: 1.2.7
 Release: 1
 Copyright: GPL
 Group: Applications/System
-Source: http://prdownloads.sourceforge.net/g15tools/libg15-1.2.2.tar.bz2
+Source: http://prdownloads.sourceforge.net/g15tools/libg15-1.2.7.tar.bz2
 URL: http://sourceforge.net/projects/g15tools
 Distribution: Linux
 Vendor: NONE
@@ -20,7 +20,7 @@ Provides: libg15
 %description
 libg15 controls the G15 keyboard, providing applications access
 to the keyboard's LCD display, and the additional keys available
-on this keyboard. Logitech Z-10 speakers and G11 keyboards are also supported.
+on this keyboard.
 
 %package devel
 Summary: libg15 controls the G15 keyboard and LCD.
@@ -32,7 +32,7 @@ Provides: libg15-devel
 %description devel
 libg15 controls the G15 keyboard, providing applications access
 to the keyboard's LCD display, and the additional keys available
-on this keyboard. Logitech Z-10 speakers and G11 keyboards are also supported.
+on this keyboard.
 
 %prep
 %setup