Import Debian changes 1.2.7-1

libg15 (1.2.7-1) unstable; urgency=low

  * New upstream release

AUTHORS

@@ -1,3 +1,5 @@
 Philip Lawatsch <philip@lawatsch.at>
 Alex Ibrado <alex@ibrado.org>
 Anthony J. Mirabella <mirabeaj@gmail.com>
+Mike Lampard <mlampard@users.sourceforge.net>
+

ChangeLog

@@ -29,5 +29,21 @@
   thread in the middle of a screen transfer etc.
 * Reset the keyboard before init to ensure correct initialisation on kernels > 2.6.19
 1.2.2
-* Parse usb descriptors to find correct endpoints
+* Add support for the logitech Z-10 speakers - many thanks to Dwayne Fontenot for
-* Add Z-10 speaker support
+  detailed information and debugging.
+1.2.3
+* Add support for the newer G15 keyboards which have amber backlights and
+  six 'G' keys.
+1.2.4
+* Turns out that the newer G15's have a different (5 byte) keyboard protocol.  
+* Optimise dumpPixmapIntoLCDFormat routine - Thanks to Adam Nielsen
+1.2.5
+* Remove 5BYTE_RETURN flag and process key packets based on length. Please
+  report any regressions.
+* Add Solaris detection and remove locks if detected.  Solaris' libUSB
+  blocks on read, forcing mutexes causes writes to block too.
+1.2.6
+* Re-Add 5BYTE_RETURN flag. Auto-detect does not work with Solaris' libusb.
+* Add laptop GamePanel support.
+1.2.7
+* Fix keypress detection for G15v2 keyboards

Makefile.in

@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,15 +15,11 @@
 @SET_MAKE@
 
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -37,19 +33,20 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
+target_triplet = @target@
+subdir = .
 DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
 	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 	$(srcdir)/config.h.in $(top_srcdir)/configure AUTHORS COPYING \
 	ChangeLog INSTALL NEWS config/config.guess config/config.sub \
 	config/depcomp config/install-sh config/ltmain.sh \
 	config/missing
-subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.in
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
@@ -65,17 +62,21 @@ LTLIBRARIES = $(lib_LTLIBRARIES)
 libg15_la_LIBADD =
 am_libg15_la_OBJECTS = libg15.lo
 libg15_la_OBJECTS = $(am_libg15_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
+libg15_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libg15_la_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/config/depcomp
 am__depfiles_maybe = depfiles
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CFLAGS) $(CFLAGS)
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
 SOURCES = $(libg15_la_SOURCES)
 DIST_SOURCES = $(libg15_la_SOURCES)
 includeHEADERS_INSTALL = $(INSTALL_HEADER)
@@ -94,8 +95,6 @@ GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
@@ -114,6 +113,7 @@ CXXFLAGS = @CXXFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
 ECHO = @ECHO@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
@@ -123,6 +123,7 @@ EXEEXT = @EXEEXT@
 F77 = @F77@
 FFLAGS = @FFLAGS@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -134,6 +135,8 @@ LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NMEDIT = @NMEDIT@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
@@ -143,17 +146,18 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -165,6 +169,7 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -192,8 +197,15 @@ program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
+target = @target@
 target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 LLIBDIR = @LIBDIR@ 
 lib_LTLIBRARIES = libg15.la
 libg15_la_SOURCES = libg15.h libg15.c
@@ -242,7 +254,7 @@ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 config.h: stamp-h1
 	@if test ! -f $@; then \
 	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
 	else :; fi
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@@ -257,21 +269,21 @@ distclean-hdr:
 	-rm -f config.h stamp-h1
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
-	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  if test -f $$p; then \
 	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
 	  else :; fi; \
 	done
 
 uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
 	done
 
 clean-libLTLIBRARIES:
@@ -283,7 +295,7 @@ clean-libLTLIBRARIES:
 	  rm -f "$${dir}/so_locations"; \
 	done
 libg15.la: $(libg15_la_OBJECTS) $(libg15_la_DEPENDENCIES) 
-	$(LINK) -rpath $(libdir) $(libg15_la_LDFLAGS) $(libg15_la_OBJECTS) $(libg15_la_LIBADD) $(LIBS)
+	$(libg15_la_LINK) -rpath $(libdir) $(libg15_la_OBJECTS) $(libg15_la_LIBADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -294,22 +306,22 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libg15.Plo@am__quote@
 
 .c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
-@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
+@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
@@ -322,10 +334,9 @@ clean-libtool:
 
 distclean-libtool:
 	-rm -f libtool
-uninstall-info-am:
 install-includeHEADERS: $(include_HEADERS)
 	@$(NORMAL_INSTALL)
-	test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)"
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
 	@list='$(include_HEADERS)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
@@ -346,8 +357,8 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
@@ -359,8 +370,8 @@ TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
 	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
@@ -370,13 +381,12 @@ ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	       END { for (i in files) print i; }'`; \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$tags$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$tags $$unique
@@ -391,24 +401,22 @@ distclean-tags:
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	mkdir $(distdir)
+	test -d $(distdir) || mkdir $(distdir)
-	$(mkdir_p) $(distdir)/config
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; \
-	list='$(DISTFILES)'; for file in $$list; do \
+	  dist_files=`for file in $$list; do echo $$file; done | \
-	  case $$file in \
+	  sed -e "s|^$$srcdirstrip/||;t" \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
 	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 	    fi; \
@@ -425,7 +433,7 @@ distdir: $(DISTFILES)
 	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r $(distdir)
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
@@ -435,6 +443,10 @@ dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
 
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
@@ -461,6 +473,8 @@ distcheck: dist
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
@@ -500,7 +514,7 @@ distcheck: dist
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
 	@cd $(distuninstallcheck_dir) \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
@@ -524,7 +538,7 @@ check: check-am
 all-am: Makefile $(LTLIBRARIES) $(HEADERS) config.h
 installdirs:
 	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@@ -574,12 +588,20 @@ info-am:
 
 install-data-am: install-includeHEADERS
 
+install-dvi: install-dvi-am
+
 install-exec-am: install-libLTLIBRARIES
 
+install-html: install-html-am
+
 install-info: install-info-am
 
 install-man:
 
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -602,24 +624,27 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-includeHEADERS uninstall-info-am \
+uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES
-	uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
 	clean-generic clean-libLTLIBRARIES clean-libtool ctags dist \
-	dist-all dist-bzip2 dist-gzip dist-hook dist-shar dist-tarZ \
+	dist-all dist-bzip2 dist-gzip dist-hook dist-lzma dist-shar \
-	dist-zip distcheck distclean distclean-compile \
+	dist-tarZ dist-zip distcheck distclean distclean-compile \
 	distclean-generic distclean-hdr distclean-libtool \
 	distclean-tags distcleancheck distdir distuninstallcheck dvi \
 	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-exec install-exec-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
 	install-includeHEADERS install-info install-info-am \
-	install-libLTLIBRARIES install-man install-strip installcheck \
+	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
 	installcheck-am installdirs maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-compile \
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags uninstall uninstall-am uninstall-includeHEADERS \
-	uninstall-info-am uninstall-libLTLIBRARIES
+	uninstall-libLTLIBRARIES
 
 
 dist-hook:

README

@@ -1 +1,9 @@
-This is a library to handle the LCD and extra keys on the Logitech G15 Gaming Keyboard.  This library requires libusb.
+This is a library to handle the LCD and extra keys on the Logitech G15 Gaming
+Keyboard and similar devices.
+This library requires libusb.
+LibG15 currently supports LCD & keys on the following devices:
+- Original G15 keyboard
+- G11 keyboard
+- Z10 speakers
+- 2nd revision of the G15 (amber backlight, 6 'G' keys, LCD)
+- Gamepanel available on some laptops

config.h.in

@@ -39,6 +39,18 @@
 /* Define to 1 if you have the <usb.h> header file. */
 #undef HAVE_USB_H
 
+/* Define if libusb implementation blocks on read or write */
+#undef LIBUSB_BLOCKS
+
+/* Target OS is Darwin */
+#undef OSTYPE_DARWIN
+
+/* Target OS is Linux */
+#undef OSTYPE_LINUX
+
+/* Target OS is Solaris */
+#undef OSTYPE_SOLARIS
+
 /* Name of package */
 #undef PACKAGE
 
@@ -60,6 +72,9 @@
 /* Define to 1 if you have the ANSI C header files. */
 #undef STDC_HEADERS
 
+/* Define to 1 for Sun version of libusb. */
+#undef SUN_LIBUSB
+
 /* Version number of package */
 #undef VERSION
 

config/config.guess

@@ -1,9 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   Free Software Foundation, Inc.
 
-timestamp='2005-08-03'
+timestamp='2008-01-23'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -55,8 +56,8 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -106,7 +107,7 @@ set_cc_for_build='
 trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
 trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
 : ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
  { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
  { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
  { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
@@ -138,6 +139,23 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
+if [ "${UNAME_SYSTEM}" = "Linux" ] ; then
+	eval $set_cc_for_build
+	cat << EOF > $dummy.c
+	#include <features.h>
+	#ifdef __UCLIBC__
+	# ifdef __UCLIBC_CONFIG_VERSION__
+	LIBC=uclibc __UCLIBC_CONFIG_VERSION__
+	# else
+	LIBC=uclibc
+	# endif
+	#else
+	LIBC=gnu
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep LIBC= | sed -e 's: ::g'`
+fi
+
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -160,6 +178,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    arm*) machine=arm-unknown ;;
 	    sh3el) machine=shl-unknown ;;
 	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
 	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
@@ -206,8 +225,11 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:ekkoBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
 	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
     macppc:MirBSD:*:*)
-	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
 	exit ;;
     *:MirBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
@@ -325,7 +347,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
-    i86pc:SunOS:5.*:*)
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
@@ -527,7 +549,7 @@ EOF
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[45])
+    *:AIX:*:[456])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -764,12 +786,19 @@ EOF
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
 	exit ;;
     *:FreeBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	case ${UNAME_MACHINE} in
+	    pc98)
+		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
 	exit ;;
-    i*:MINGW*:*)
+    *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
     i*:windows32*:*)
@@ -779,9 +808,18 @@ EOF
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit ;;
-    x86:Interix*:[34]*)
+    *:Interix*:[3456]*)
-	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+    	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
 		exit ;;
+	    EM64T | authenticamd)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
 	exit ;;
@@ -815,25 +853,35 @@ EOF
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
     arm*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	else
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     cris:Linux:*:*)
-	echo cris-axis-linux-gnu
+	echo cris-axis-linux-${LIBC}
 	exit ;;
     crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
+	echo crisv32-axis-linux-${LIBC}
 	exit ;;
     frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
+    	echo frv-unknown-linux-${LIBC}
 	exit ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     mips:Linux:*:*)
 	eval $set_cc_for_build
@@ -851,8 +899,12 @@ EOF
 	#endif
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
     mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -870,17 +922,21 @@ EOF
 	#endif
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
     or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
+	echo or32-unknown-linux-${LIBC}
 	exit ;;
     ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
+	echo powerpc-unknown-linux-${LIBC}
 	exit ;;
     ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
+	echo powerpc64-unknown-linux-${LIBC}
 	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
@@ -893,34 +949,40 @@ EOF
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
         esac
 	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
 	esac
 	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
+	echo hppa64-unknown-linux-${LIBC}
 	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
 	echo ${UNAME_MACHINE}-ibm-linux
 	exit ;;
     sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+    	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
 	exit ;;
     x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
+	echo x86_64-unknown-linux-${LIBC}
+	exit ;;
+    xtensa*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
@@ -935,20 +997,22 @@ EOF
 				    p'`
         case "$ld_supported_targets" in
 	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-${LIBC}"
 		;;
 	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}aout"
 		exit ;;
 	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}coff"
 		exit ;;
 	  "")
 		# Either a pre-BFD a.out linker (linux-gnuoldld) or
 		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}oldld"
 		exit ;;
 	esac
+	# This should get integrated into the C code below, but now we hack
+	if [ "$LIBC" != "gnu" ] ; then echo "$TENTATIVE" && exit 0 ; fi
 	# Determine whether the default compiler is a.out or elf
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -964,7 +1028,7 @@ EOF
 	LIBC=gnulibc1
 	# endif
 	#else
-	#ifdef __INTEL_COMPILER
+	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
 	LIBC=gnu
 	#else
 	LIBC=gnuaout
@@ -974,7 +1038,11 @@ EOF
 	LIBC=dietlibc
 	#endif
 EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^LIBC/{
+		s: ::g
+		p
+	    }'`"
 	test x"${LIBC}" != x && {
 		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
 		exit
@@ -1176,6 +1244,15 @@ EOF
     SX-6:SUPER-UX:*:*)
 	echo sx6-nec-superux${UNAME_RELEASE}
 	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
 	exit ;;
@@ -1185,7 +1262,6 @@ EOF
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
 	case $UNAME_PROCESSOR in
-	    *86) UNAME_PROCESSOR=i686 ;;
 	    unknown) UNAME_PROCESSOR=powerpc ;;
 	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
@@ -1264,6 +1340,9 @@ EOF
     i*86:skyos:*:*)
 	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
 	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
@@ -1424,9 +1503,9 @@ This script, last modified $timestamp, has failed to recognize
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
 
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 and
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
 
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be

config/config.sub

@@ -1,9 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   Free Software Foundation, Inc.
 
-timestamp='2005-07-08'
+timestamp='2008-01-16'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -71,8 +72,8 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-Free Software Foundation, Inc.
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -119,8 +120,9 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -171,6 +173,10 @@ case $os in
 	-hiux*)
 		os=-hiuxwe2
 		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco5)
 		os=-sco3.2v5
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -187,6 +193,10 @@ case $os in
 		# Don't forget version if it is 3.2v4 or newer.
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
 		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
 	-sco*)
 		os=-sco3.2v2
 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
@@ -231,15 +241,16 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
 	| bfin \
 	| c4x | clipper \
-	| d10v | d30v | dlx | dsp16xx \
+	| d10v | d30v | dlx | dsp16xx | dvp \
-	| fr30 | frv \
+	| fido | fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
-	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -257,28 +268,27 @@ case $basic_machine in
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
-	| ms1 \
+	| mt \
 	| msp430 \
+	| nios | nios2 \
 	| ns16k | ns32k \
 	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]a*eb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| strongarm \
+	| spu | strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
-	m32c)
-		basic_machine=$basic_machine-unknown
-		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
 		# Motorola 68HC11/12.
 		basic_machine=$basic_machine-unknown
@@ -286,6 +296,9 @@ case $basic_machine in
 		;;
 	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
 		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
 
 	# We use `pc' rather than `unknown'
 	# because (1) that's what they normally are, and
@@ -305,18 +318,18 @@ case $basic_machine in
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* \
+	| avr-* | avr32-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
-	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
-	| m32r-* | m32rle-* \
+	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
 	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
@@ -336,30 +349,33 @@ case $basic_machine in
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
-	| ms1-* \
+	| mt-* \
 	| msp430-* \
+	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]a*eb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
-	| xstormy16-* | xtensa-* \
+	| xstormy16-* | xtensa*-* \
 	| ymp-* \
 	| z8k-*)
 		;;
-	m32c-*)
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
 		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
@@ -431,6 +447,14 @@ case $basic_machine in
 		basic_machine=ns32k-sequent
 		os=-dynix
 		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
@@ -463,8 +487,8 @@ case $basic_machine in
 		basic_machine=craynv-cray
 		os=-unicosmp
 		;;
-	cr16c)
+	cr16)
-		basic_machine=cr16c-unknown
+		basic_machine=cr16-unknown
 		os=-elf
 		;;
 	crds | unos)
@@ -656,6 +680,14 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	m88k-omron*)
 		basic_machine=m88k-omron
 		;;
@@ -671,6 +703,10 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-mingw32
 		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
 	miniframe)
 		basic_machine=m68000-convergent
 		;;
@@ -678,6 +714,24 @@ case $basic_machine in
 		basic_machine=m68k-atari
 		os=-mint
 		;;
+	mipsEE* | ee | ps2)
+		basic_machine=mips64r5900el-scei
+		case $os in
+		    -linux*)
+			;;
+		    *)
+			os=-elf
+			;;
+		esac
+		;;
+	iop)
+		basic_machine=mipsel-scei
+		os=-irx
+		;;
+	dvp)
+		basic_machine=dvp-scei
+		os=-elf
+		;;
 	mips3*-*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
 		;;
@@ -696,6 +750,9 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-msdos
 		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
 	mvs)
 		basic_machine=i370-ibm
 		os=-mvs
@@ -794,6 +851,14 @@ case $basic_machine in
 		basic_machine=i860-intel
 		os=-osf
 		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
 	pbd)
 		basic_machine=sparc-tti
 		;;
@@ -803,6 +868,12 @@ case $basic_machine in
 	pc532 | pc532-*)
 		basic_machine=ns32k-pc532
 		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	pentium | p5 | k5 | k6 | nexgen | viac3)
 		basic_machine=i586-pc
 		;;
@@ -859,6 +930,10 @@ case $basic_machine in
 		basic_machine=i586-unknown
 		os=-pw32
 		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
 	rom68k)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -885,6 +960,10 @@ case $basic_machine in
 	sb1el)
 		basic_machine=mipsisa64sb1el-unknown
 		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
 	sei)
 		basic_machine=mips-sei
 		os=-seiux
@@ -896,6 +975,9 @@ case $basic_machine in
 		basic_machine=sh-hitachi
 		os=-hms
 		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
 	sh64)
 		basic_machine=sh64-unknown
 		;;
@@ -985,6 +1067,10 @@ case $basic_machine in
 		basic_machine=tic6x-unknown
 		os=-coff
 		;;
+	tile*)
+		basic_machine=tile-unknown
+		os=-linux-gnu
+		;;
 	tx39)
 		basic_machine=mipstx39-unknown
 		;;
@@ -1101,7 +1187,7 @@ case $basic_machine in
 	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b)
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
 		basic_machine=sparc-sun
 		;;
 	cydra)
@@ -1174,21 +1260,23 @@ case $os in
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -openbsd* | -solidbsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -irx*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1340,6 +1428,12 @@ else
 # system, and we'll never get to this point.
 
 case $basic_machine in
+        score-*)
+		os=-elf
+		;;
+        spu-*)
+		os=-elf
+		;;
 	*-acorn)
 		os=-riscix1.2
 		;;
@@ -1377,6 +1471,9 @@ case $basic_machine in
 	m68*-cisco)
 		os=-aout
 		;;
+        mep-*)
+		os=-elf
+		;;
 	mips*-cisco)
 		os=-elf
 		;;

config/depcomp

@@ -1,9 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2005-07-09.11
+scriptversion=2007-03-29.01
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
+# Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -91,7 +92,20 @@ gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
 ## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
 ## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
   stat=$?
   if test $stat -eq 0; then :
   else
@@ -201,34 +215,39 @@ aix)
   # current directory.  Also, the AIX compiler puts `$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  tmpdepfile="$stripped.u"
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
   stat=$?
 
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
   if test $stat -eq 0; then :
   else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
   if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -276,6 +295,46 @@ icc)
   rm -f "$tmpdepfile"
   ;;
 
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
 tru64)
    # The Tru64 compiler uses -MD to generate dependencies as a side
    # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
@@ -288,13 +347,13 @@ tru64)
 
    if test "$libtool" = yes; then
       # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mecanism is used in libtool 1.4 series to
+      # static library.  This mechanism is used in libtool 1.4 series to
       # handle both shared and static libraries in a single compilation.
       # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
       #
       # With libtool 1.5 this exception was removed, and libtool now
       # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in in $dir.libs/$base.o.d and
+      # compilations output dependencies in $dir.libs/$base.o.d and
       # in $dir$base.o.d.  We have to check for both files, because
       # one of the two compilations can be disabled.  We should prefer
       # $dir$base.o.d over $dir.libs/$base.o.d because the latter is

config/install-sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2005-05-14.22
+scriptversion=2006-12-25.00
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -39,38 +39,68 @@ scriptversion=2005-05-14.22
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
+# from scratch.
-# shared with many OS's install programs.
+
+nl='
+'
+IFS=" ""	$nl"
 
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
 
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
 
-mvprog="${MVPROG-mv}"
+chgrpprog=${CHGRPPROG-chgrp}
-cpprog="${CPPROG-cp}"
+chmodprog=${CHMODPROG-chmod}
-chmodprog="${CHMODPROG-chmod}"
+chownprog=${CHOWNPROG-chown}
-chownprog="${CHOWNPROG-chown}"
+cmpprog=${CMPPROG-cmp}
-chgrpprog="${CHGRPPROG-chgrp}"
+cpprog=${CPPROG-cp}
-stripprog="${STRIPPROG-strip}"
+mkdirprog=${MKDIRPROG-mkdir}
-rmprog="${RMPROG-rm}"
+mvprog=${MVPROG-mv}
-mkdirprog="${MKDIRPROG-mkdir}"
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
 
-chmodcmd="$chmodprog 0755"
-chowncmd=
 chgrpcmd=
-stripcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
 src=
 dst=
 dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
 no_target_directory=
 
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
    or: $0 [OPTION]... -t DIRECTORY SRCFILES...
    or: $0 [OPTION]... -d DIRECTORIES...
@@ -80,7 +110,11 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
 In the 4th, create DIRECTORIES.
 
 Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
   -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
   -d            create directories instead of installing files.
   -g GROUP      $chgrpprog installed files to GROUP.
   -m MODE       $chmodprog installed files to MODE.
@@ -88,73 +122,74 @@ Options:
   -s            $stripprog installed files.
   -t DIRECTORY  install into DIRECTORY.
   -T            report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
 
 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
 "
 
-while test -n "$1"; do
+while test $# -ne 0; do
   case $1 in
-    -c) shift
+    -c) ;;
-        continue;;
 
-    -d) dir_arg=true
+    -C) copy_on_change=true;;
-        shift
+
-        continue;;
+    -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-        shift
+	shift;;
-        shift
-        continue;;
 
     --help) echo "$usage"; exit $?;;
 
-    -m) chmodcmd="$chmodprog $2"
+    -m) mode=$2
-        shift
+	case $mode in
-        shift
+	  *' '* | *'	'* | *'
-        continue;;
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
 
     -o) chowncmd="$chownprog $2"
-        shift
+	shift;;
-        shift
-        continue;;
 
-    -s) stripcmd=$stripprog
+    -s) stripcmd=$stripprog;;
-        shift
-        continue;;
 
-    -t) dstarg=$2
+    -t) dst_arg=$2
-	shift
+	shift;;
-	shift
-	continue;;
 
-    -T) no_target_directory=true
+    -T) no_target_directory=true;;
-	shift
-	continue;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
-    *)  # When -d is used, all remaining arguments are directories to create.
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
-	test -n "$dir_arg$dstarg" && break
   # Otherwise, the last argument is the destination.  Remove it from $@.
   for arg
   do
-          if test -n "$dstarg"; then
+    if test -n "$dst_arg"; then
       # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
+      set fnord "$@" "$dst_arg"
       shift # fnord
     fi
     shift # arg
-	  dstarg=$arg
+    dst_arg=$arg
-	done
-	break;;
-  esac
   done
+fi
 
-if test -z "$1"; then
+if test $# -eq 0; then
   if test -z "$dir_arg"; then
     echo "$0: no input file specified." >&2
     exit 1
@@ -164,6 +199,33 @@ if test -z "$1"; then
   exit 0
 fi
 
+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
 for src
 do
   # Protect names starting with `-'.
@@ -173,15 +235,11 @@ do
 
   if test -n "$dir_arg"; then
     dst=$src
-    src=
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
 
-    if test -d "$dst"; then
-      mkdircmd=:
-      chmodcmd=
-    else
-      mkdircmd=$mkdirprog
-    fi
-  else
     # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
     # might cause directories to be created, which would be especially bad
     # if $src (and thus $dsttmp) contains '*'.
@@ -190,12 +248,12 @@ do
       exit 1
     fi
 
-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
       echo "$0: no destination specified." >&2
       exit 1
     fi
 
-    dst=$dstarg
+    dst=$dst_arg
     # Protect names starting with `-'.
     case $dst in
       -*) dst=./$dst;;
@@ -205,56 +263,184 @@ do
     # if double slashes aren't ignored.
     if test -d "$dst"; then
       if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
+	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
       fi
-      dst=$dst/`basename "$src"`
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
     fi
   fi
 
-  # This sed command emulates the dirname command.
+  obsolete_mkdir_used=false
-  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
 
-  # Make sure that the destination directory exists.
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
 
-  # Skip lots of stat calls in the usual case.
+	  *[0-7])
-  if test ! -d "$dstdir"; then
+	    mkdir_umask=`expr $umask + 22 \
-    defaultIFS='
+	      - $umask % 100 % 40 + $umask % 20 \
-	 '
+	      - $umask % 10 % 4 + $umask % 2
-    IFS="${IFS-$defaultIFS}"
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
 
       oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
+      IFS=/
-    IFS='%'
+      $posix_glob set -f
-    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+      set fnord $dstdir
       shift
+      $posix_glob set +f
       IFS=$oIFS
 
-    pathcomp=
+      prefixes=
 
-    while test $# -ne 0 ; do
+      for d
-      pathcomp=$pathcomp$1
+      do
-      shift
+	test -z "$d" && continue
-      if test ! -d "$pathcomp"; then
+
-        $mkdirprog "$pathcomp"
+	prefix=$prefix$d
-	# mkdir can fail with a `File exist' error in case several
+	if test -d "$prefix"; then
-	# install-sh are creating the directory concurrently.  This
+	  prefixes=
-	# is OK.
+	else
-	test -d "$pathcomp" || exit
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
 	  fi
-      pathcomp=$pathcomp/
+	fi
+	prefix=$prefix/
       done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
   fi
 
   if test -n "$dir_arg"; then
-    $doit $mkdircmd "$dst" \
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
   else
-    dstfile=`basename "$dst"`
 
     # Make a couple of temp file names in the proper directory.
     dsttmp=$dstdir/_inst.$$_
@@ -262,10 +448,9 @@ do
 
     # Trap to clean up those temp files at exit.
     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-    trap '(exit $?); exit' 1 2 13 15
 
     # Copy the file name to the temp name.
-    $doit $cpprog "$src" "$dsttmp" &&
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
 
     # and set any options; do chmod last to preserve setuid bits.
     #
@@ -273,47 +458,58 @@ do
     # ignore errors from any of these, just make sure not to ignore
     # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
 
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-      || {
       # The rename failed, perhaps because mv can't rename something else
       # to itself, or perhaps because mv is so ancient that it does not
       # support -f.
-
+      {
 	# Now remove or move aside any old file at destination location.
 	# We try this two ways since rm can't unlink itself on some
 	# systems and the destination file might be busy for other
 	# reasons.  In this case, the final cleanup might fail but the new
 	# file should still install successfully.
 	{
-	     if test -f "$dstdir/$dstfile"; then
+	  test ! -f "$dst" ||
-	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	       || {
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
 	    (exit 1); exit 1
 	  }
-	     else
-	       :
-	     fi
 	} &&
 
 	# Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	$doit $mvcmd "$dsttmp" "$dst"
       }
-    }
+    fi || exit 1
-  fi || { (exit 1); exit 1; }
-done
 
-# The final little trick to "correctly" pass the exit status to the exit trap.
+    trap '' 0
-{
+  fi
-  (exit 0); exit 0
+done
-}
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)

config/missing

@@ -1,9 +1,9 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2005-06-08.21
+scriptversion=2006-05-10.23
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
 #   Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
@@ -33,6 +33,8 @@ if test $# -eq 0; then
 fi
 
 run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
 
 # In the cases where this matters, `missing' is being run in the
 # srcdir already.
@@ -44,7 +46,7 @@ fi
 
 msg="missing on your system"
 
-case "$1" in
+case $1 in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
@@ -77,6 +79,7 @@ Supported PROGRAM values:
   aclocal      touch file \`aclocal.m4'
   autoconf     touch file \`configure'
   autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
   automake     touch all \`Makefile.in' files
   bison        create \`y.tab.[ch]', if possible, from existing .[ch]
   flex         create \`lex.yy.c', if possible, from existing .c
@@ -106,7 +109,7 @@ esac
 # Now exit if we have it, but it failed.  Also exit now if we
 # don't have it and --version was passed (most likely to detect
 # the program).
-case "$1" in
+case $1 in
   lex|yacc)
     # Not GNU programs, they don't have --version.
     ;;
@@ -135,7 +138,7 @@ esac
 
 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
-case "$1" in
+case $1 in
   aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
@@ -164,7 +167,7 @@ WARNING: \`$1' is $msg.  You should only need it if
     test -z "$files" && files="config.h"
     touch_files=
     for f in $files; do
-      case "$f" in
+      case $f in
       *:*) touch_files="$touch_files "`echo "$f" |
 				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
       *) touch_files="$touch_files $f.in";;
@@ -192,8 +195,8 @@ WARNING: \`$1' is needed, but is $msg.
          You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
 
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -f "$file"; then
 	touch $file
     else
@@ -214,25 +217,25 @@ WARNING: \`$1' $msg.  You should only need it if
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
     rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.y)
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.c
 	    fi
 	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" y.tab.h
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f y.tab.h ]; then
+    if test ! -f y.tab.h; then
 	echo >y.tab.h
     fi
-    if [ ! -f y.tab.c ]; then
+    if test ! -f y.tab.c; then
 	echo 'main() { return 0; }' >y.tab.c
     fi
     ;;
@@ -244,18 +247,18 @@ WARNING: \`$1' is $msg.  You should only need it if
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
     rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
+    if test $# -ne 1; then
         eval LASTARG="\${$#}"
-	case "$LASTARG" in
+	case $LASTARG in
 	*.l)
 	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
+	    if test -f "$SRCFILE"; then
 	         cp "$SRCFILE" lex.yy.c
 	    fi
 	  ;;
 	esac
     fi
-    if [ ! -f lex.yy.c ]; then
+    if test ! -f lex.yy.c; then
 	echo 'main() { return 0; }' >lex.yy.c
     fi
     ;;
@@ -267,11 +270,9 @@ WARNING: \`$1' is $msg.  You should only need it if
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
 
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
-    if test -z "$file"; then
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
-    fi
-    if [ -f "$file" ]; then
 	touch $file
     else
 	test -z "$file" || exec >$file
@@ -289,11 +290,17 @@ WARNING: \`$1' is $msg.  You should only need it if
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
     # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
     if test -z "$file"; then
       # ... or it is the one specified with @setfilename ...
       infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
       # ... or it is derived from the source name (dir/f.texi becomes f.info)
       test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
@@ -317,13 +324,13 @@ WARNING: \`$1' is $msg.  You should only need it if
     fi
     firstarg="$1"
     if shift; then
-	case "$firstarg" in
+	case $firstarg in
 	*o*)
 	    firstarg=`echo "$firstarg" | sed s/o//`
 	    tar "$firstarg" "$@" && exit 0
 	    ;;
 	esac
-	case "$firstarg" in
+	case $firstarg in
 	*h*)
 	    firstarg=`echo "$firstarg" | sed s/h//`
 	    tar "$firstarg" "$@" && exit 0

configure.in

@@ -2,9 +2,11 @@
 # Process this file with autoconf to produce a configure script.
 
 AC_PREREQ(2.59)
-AC_INIT(libg15, 1.2.2, mlampard@users.sourceforge.net)
+AC_INIT(libg15, 1.2.7, mlampard@users.sourceforge.net)
 AC_PREFIX_DEFAULT(/usr)
 AC_CONFIG_AUX_DIR(config)
+AC_CANONICAL_TARGET()
+
 AM_INIT_AUTOMAKE()
 AC_CONFIG_SRCDIR([libg15.c])
 AC_CONFIG_HEADER([config.h])
@@ -13,9 +15,29 @@ AC_CONFIG_HEADER([config.h])
 AC_PROG_CC
 AC_PROG_LIBTOOL
 
+case $host_os in
+	*linux*) 
+	  AC_DEFINE([OSTYPE_LINUX], [1],[Target OS is Linux])
+	  ;;
+	*darwin*)
+	  AC_DEFINE([OSTYPE_DARWIN], [1],[Target OS is Darwin])
+	  ;;
+        *solaris*)
+          AC_DEFINE([OSTYPE_SOLARIS], [1],[Target OS is Solaris])
+	  AC_SEARCH_LIBS([nanosleep],rt,[],[],[])
+          AC_DEFINE(SUN_LIBUSB, 1, [Define to 1 for Sun version of libusb.])
+	  libusb_blocks=true	  
+	  ;;
+esac
+
 # Checks for libraries.
 AC_CHECK_LIB([usb], [main], ,AC_MSG_ERROR(["libusb not found. please install it"]))
 
+dnl Some versions of libusb do not honour timeout and block. Suns' version is one of them.
+if test "x$libusb_blocks" == "xtrue"; then
+      AC_DEFINE([LIBUSB_BLOCKS], [1],[Define if libusb implementation blocks on read or write])
+fi
+
 # Checks for header files.
 AC_HEADER_STDC
 AC_CHECK_HEADERS([string.h])

debian/changelog

@@ -1,3 +1,33 @@
+libg15 (1.2.7-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Wed, 22 Apr 2009 07:24:53 +0200
+
+libg15 (1.2.6-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Mon, 28 Jan 2008 07:58:11 +0100
+
+libg15 (1.2.5-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Wed, 09 Jan 2008 08:06:33 +0100
+
+libg15 (1.2.4-1) unstable; urgency=low
+
+  * New upstream release
+
+ -- Giacomo Catenazzi <cate@debian.org>  Tue, 18 Dec 2007 08:08:43 +0100
+
+libg15 (1.2.3-1) unstable; urgency=low
+
+  * New upstrem version: add support of new g15 keyboards
+
+ -- Giacomo Catenazzi <cate@debian.org>  Thu, 15 Nov 2007 07:44:43 +0100
+
 libg15 (1.2.2-1) unstable; urgency=low
 
   * Initial release

debian/control

@@ -3,7 +3,8 @@ Section: libs
 Priority: optional
 Maintainer: Giacomo Catenazzi <cate@debian.org>
 Build-Depends: cdbs, debhelper (>= 5), autotools-dev, libusb-dev
-Standards-Version: 3.7.2
+Standards-Version: 3.8.1
+Homepage: http://www.g15tools.com/
 
 Package: libg15-1
 Section: libs
@@ -17,7 +18,7 @@ Description: Library for interfacing with the Logitech G15 keyboards
 
 Package: libg15-dev
 Section: libdevel
-Depends: libg15-1 (= ${binary:Version})
+Depends: libg15-1 (= ${binary:Version}), ${misc:Depends}
 Architecture: any
 Description: Library for interfacing with the Logitech G15 keyboards
  libg15 provides an API for low level control of the LCD display and

debian/rules

@@ -5,4 +5,4 @@ DEB_DH_MAKESHLIBS_ARGS_libg15 := --version-info
 include /usr/share/cdbs/1/rules/debhelper.mk
 include /usr/share/cdbs/1/class/autotools.mk
 
-
+DEB_CONFIGURE_EXTRA_FLAGS = --quiet

debian/watch

@@ -3,5 +3,5 @@
 # Compulsory line, this is a version 3 file
 version=3
 
-http://sf.net/g15tools libg15-(.*)\.tar\.bz2
+http://sf.net/g15tools libg15-(.*)\.tar\.gz
 

libg15.c

@@ -12,8 +12,12 @@
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with g15lcd; if not, write to the Free Software
+    along with libg15; if not, write to the Free Software
     Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+    (c) 2006-2007 The G15tools Project - g15tools.sf.net
+    
+    $Revision: 292 $ -  $Date: 2008-11-11 08:51:25 -0500 (Tue, 11 Nov 2008) $ $Author: aneurysm9 $
 */
 
 #include <pthread.h>
@@ -23,6 +27,7 @@
 #include <usb.h>
 #include <string.h>
 #include <errno.h>
+#include "config.h"
 
 static usb_dev_handle *keyboard_device = 0;
 static int libg15_debugging_enabled = 0;
@@ -34,13 +39,14 @@ static int g15_keys_endpoint = 0;
 static int g15_lcd_endpoint = 0;
 static pthread_mutex_t libusb_mutex;
 
-
 /* to add a new device, simply create a new DEVICE() in this list */
 /* Fields are: "Name",VendorID,ProductID,Capabilities */
 const libg15_devices_t g15_devices[] = {
     DEVICE("Logitech G15",0x46d,0xc222,G15_LCD|G15_KEYS),
     DEVICE("Logitech G11",0x46d,0xc225,G15_KEYS),
     DEVICE("Logitech Z-10",0x46d,0x0a07,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED),
+    DEVICE("Logitech G15 v2",0x46d,0xc227,G15_LCD|G15_KEYS|G15_DEVICE_5BYTE_RETURN),
+    DEVICE("Logitech Gamepanel",0x46d,0xc251,G15_LCD|G15_KEYS|G15_DEVICE_IS_SHARED),
     DEVICE(NULL,0,0,0)
 };
 
@@ -191,7 +197,7 @@ static usb_dev_handle * findAndOpenDevice(libg15_devices_t handled_device, int d
                                     }
                                     else
                                     {
-                                        g15_log(stderr,G15_LOG_INFO,"Sorry, I could not detached the driver, giving up\n");
+                                        g15_log(stderr,G15_LOG_INFO,"Sorry, I could not detach the driver, giving up\n");
                                         return 0;
                                     }
 
@@ -297,6 +303,12 @@ int initLibG15()
     if (retval)
         return retval;
 
+    g15_log(stderr,G15_LOG_INFO,"%s\n",PACKAGE_STRING);
+    
+#ifdef SUN_LIBUSB
+    g15_log(stderr,G15_LOG_INFO,"Using Sun libusb.\n");
+#endif
+
     g15NumberOfConnectedDevices();
   
     keyboard_device = findAndOpenG15();
@@ -312,8 +324,10 @@ int exitLibG15()
 {
     int retval = G15_NO_ERROR;
     if (keyboard_device){
+#ifndef SUN_LIBUSB
         retval = usb_release_interface (keyboard_device, 0);
         usleep(50*1000);
+#endif
 #if 0
         retval = usb_reset(keyboard_device);
         usleep(50*1000);
@@ -329,36 +343,84 @@ int exitLibG15()
 
 static void dumpPixmapIntoLCDFormat(unsigned char *lcd_buffer, unsigned char const *data)
 {
-    unsigned int offset_from_start = G15_LCD_OFFSET;
+/*
+
+  For a set of bytes (A, B, C, etc.) the bits representing pixels will appear on the LCD like this:
+	
+	A0 B0 C0
+	A1 B1 C1
+	A2 B2 C2
+	A3 B3 C3 ... and across for G15_LCD_WIDTH bytes
+	A4 B4 C4
+	A5 B5 C5
+	A6 B6 C6
+	A7 B7 C7
+	
+	A0
+	A1  <- second 8-pixel-high row starts straight after the last byte on
+	A2     the previous row
+	A3
+	A4
+	A5
+	A6
+	A7
+	A8
+
+	A0
+	...
+	A0
+	...
+	A0
+	...
+	A0
+	A1 <- only the first three bits are shown on the bottom row (the last three
+	A2    pixels of the 43-pixel high display.)
+	
+
+*/
+
+    unsigned int output_offset = G15_LCD_OFFSET;
+    unsigned int base_offset = 0;
     unsigned int curr_row = 0;
     unsigned int curr_col = 0;
 
-    for (curr_row=0;curr_row<G15_LCD_HEIGHT;++curr_row)
+    /* Five 8-pixel rows + a little 3-pixel row.  This formula will calculate
+       the minimum number of bytes required to hold a complete column.  (It
+       basically divides by eight and rounds up the result to the nearest byte,
+       but at compile time.
+      */
+
+#define G15_LCD_HEIGHT_IN_BYTES  ((G15_LCD_HEIGHT + ((8 - (G15_LCD_HEIGHT % 8)) % 8)) / 8)
+
+    for (curr_row = 0; curr_row < G15_LCD_HEIGHT_IN_BYTES; ++curr_row)
     {
         for (curr_col = 0; curr_col < G15_LCD_WIDTH; ++curr_col)
         {
-            unsigned int pixel_offset = curr_row*G15_LCD_WIDTH + curr_col;
+            unsigned int bit = curr_col % 8;
-            unsigned int byte_offset = pixel_offset / 8;
+		/* Copy a 1x8 column of pixels across from the source image to the LCD buffer. */
-            unsigned int bit_offset = pixel_offset % 8;
-            unsigned int val = data[byte_offset] & 1<<(7-bit_offset);
 		
-            unsigned int row = curr_row / 8;
+            lcd_buffer[output_offset] =
-            unsigned int offset = G15_LCD_WIDTH*row + curr_col;
+			(((data[base_offset                        ] << bit) & 0x80) >> 7) |
-            unsigned int bit = curr_row % 8;
+			(((data[base_offset +  G15_LCD_WIDTH/8     ] << bit) & 0x80) >> 6) |
-    
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 2)] << bit) & 0x80) >> 5) |
-/*
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 3)] << bit) & 0x80) >> 4) |
-            if (val)
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 4)] << bit) & 0x80) >> 3) |
-            printf("Setting pixel at row %d col %d to %d offset %d bit %d\n",curr_row,curr_col, val, offset, bit);
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 5)] << bit) & 0x80) >> 2) |
-      */
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 6)] << bit) & 0x80) >> 1) |
-            if (val)
+			(((data[base_offset + (G15_LCD_WIDTH/8 * 7)] << bit) & 0x80) >> 0);
-                lcd_buffer[offset_from_start + offset] = lcd_buffer[offset_from_start + offset] | 1 << bit;
+            ++output_offset;
-            else
+            if (bit == 7)
-                lcd_buffer[offset_from_start + offset] = lcd_buffer[offset_from_start + offset]  &  ~(1 << bit);
+              base_offset++;
         }
+	/* Jump down seven pixel-rows in the source image, since we've just
+	   done a row of eight pixels in one pass (and we counted one pixel-row
+  	   while we were going, so now we skip the next seven pixel-rows.) */
+	base_offset += G15_LCD_WIDTH - (G15_LCD_WIDTH / 8);
     }
 }
 
 int handle_usb_errors(const char *prefix, int ret) {
+
     switch (ret){
         case -ETIMEDOUT:
             return G15_ERROR_READING_USB_DEVICE;  /* backward-compatibility */
@@ -373,7 +435,7 @@ int handle_usb_errors(const char *prefix, int ret) {
             case -EAGAIN: /* try again */
             case -EFBIG: /* too many frames to handle */
             case -EMSGSIZE: /* msgsize is invalid */
-                 g15_log(stderr,G15_LOG_INFO,"usb error: %s (%i)\n",prefix,ret);     
+                 g15_log(stderr,G15_LOG_INFO,"usb error: %s %s (%i)\n",prefix,usb_strerror(),ret);     
                  break;
             case -EPIPE: /* endpoint is stalled */
                  g15_log(stderr,G15_LOG_INFO,"usb error: %s EPIPE! clearing...\n",prefix);     
@@ -382,7 +444,7 @@ int handle_usb_errors(const char *prefix, int ret) {
                  pthread_mutex_unlock(&libusb_mutex);
                  break;
             default: /* timed out */
-                 g15_log(stderr,G15_LOG_INFO,"Unknown usb error: %s !! (err is %i)\n",prefix,ret);     
+                 g15_log(stderr,G15_LOG_INFO,"Unknown usb error: %s !! (err is %i (%s))\n",prefix,ret,usb_strerror());
     }
     return ret;
 }
@@ -392,7 +454,10 @@ int writePixmapToLCD(unsigned char const *data)
     int ret = 0;
     int transfercount=0;
     unsigned char lcd_buffer[G15_BUFFER_LEN];
-    memset(lcd_buffer,0,G15_BUFFER_LEN);
+    /* The pixmap conversion function will overwrite everything after G15_LCD_OFFSET, so we only need to blank
+       the buffer up to this point.  (Even though the keyboard only cares about bytes 0-23.) */
+    memset(lcd_buffer, 0, G15_LCD_OFFSET);  /* G15_BUFFER_LEN); */
+
     dumpPixmapIntoLCDFormat(lcd_buffer, data);
 
     if(!(g15_devices[found_devicetype].caps & G15_LCD))
@@ -406,7 +471,9 @@ int writePixmapToLCD(unsigned char const *data)
     I'm not sure how successful this will be in combatting ENOSPC, but we'll give it try in the real-world. */
 
     if(enospc_slowdown != 0){
+#ifndef LIBUSB_BLOCKS
         pthread_mutex_lock(&libusb_mutex);  
+#endif
         for(transfercount = 0;transfercount<=31;transfercount++){
             ret = usb_interrupt_write(keyboard_device, g15_lcd_endpoint, (char*)lcd_buffer+(32*transfercount), 32, 1000);
             if (ret != 32)
@@ -416,12 +483,18 @@ int writePixmapToLCD(unsigned char const *data)
             }
             usleep(100);
         }
+#ifndef LIBUSB_BLOCKS
         pthread_mutex_unlock(&libusb_mutex);
+#endif        
     }else{
         /* transfer entire buffer in one hit */
+#ifdef LIBUSB_BLOCKS
+        ret = usb_interrupt_write(keyboard_device, g15_lcd_endpoint, (char*)lcd_buffer, G15_BUFFER_LEN, 1000);
+#else
         pthread_mutex_lock(&libusb_mutex);
         ret = usb_interrupt_write(keyboard_device, g15_lcd_endpoint, (char*)lcd_buffer, G15_BUFFER_LEN, 1000);
         pthread_mutex_unlock(&libusb_mutex);
+#endif
         if (ret != G15_BUFFER_LEN)
         {
             handle_usb_errors ("LCDPixmap Write",ret);
@@ -538,7 +611,7 @@ static unsigned char g15KeyToLogitechKeyCode(int key)
     }
 }
 
-static void processKeyEvent(unsigned int *pressed_keys, unsigned char *buffer)
+static void processKeyEvent9Byte(unsigned int *pressed_keys, unsigned char *buffer)
 {
     int i;
   
@@ -629,22 +702,91 @@ static void processKeyEvent(unsigned int *pressed_keys, unsigned char *buffer)
     }
 }
 
+static void processKeyEvent5Byte(unsigned int *pressed_keys, unsigned char *buffer)
+{
+    int i;
+  
+    *pressed_keys = 0;
+  
+    g15_log(stderr,G15_LOG_WARN,"Keyboard: %x, %x, %x, %x, %x\n",buffer[0],buffer[1],buffer[2],buffer[3],buffer[4]);
+  
+    if (buffer[0] == 0x02)
+    {
+        if (buffer[1]&0x01)
+            *pressed_keys |= G15_KEY_G1;
+    
+        if (buffer[1]&0x02)
+            *pressed_keys |= G15_KEY_G2;
+
+        if (buffer[1]&0x04)
+            *pressed_keys |= G15_KEY_G3;
+
+        if (buffer[1]&0x08)
+            *pressed_keys |= G15_KEY_G4;
+
+        if (buffer[1]&0x10)
+            *pressed_keys |= G15_KEY_G5;
+
+        if (buffer[1]&0x20)
+            *pressed_keys |= G15_KEY_G6;
+            
+        if (buffer[1]&0x40)
+            *pressed_keys |= G15_KEY_M1;
+            
+        if (buffer[1]&0x80)
+            *pressed_keys |= G15_KEY_M2;
+            
+        if (buffer[2]&0x20)
+            *pressed_keys |= G15_KEY_M3;
+            
+        if (buffer[2]&0x40)
+            *pressed_keys |= G15_KEY_MR;
+
+        if (buffer[2]&0x80)
+            *pressed_keys |= G15_KEY_L1;
+            
+        if (buffer[2]&0x2)
+            *pressed_keys |= G15_KEY_L2;
+            
+        if (buffer[2]&0x4)
+            *pressed_keys |= G15_KEY_L3;
+
+        if (buffer[2]&0x8)
+            *pressed_keys |= G15_KEY_L4;
+            
+        if (buffer[2]&0x10)
+            *pressed_keys |= G15_KEY_L5;
+            
+        if (buffer[2]&0x1)
+            *pressed_keys |= G15_KEY_LIGHT;
+    }
+}
+
+
 int getPressedKeys(unsigned int *pressed_keys, unsigned int timeout)
 {
-    unsigned char buffer[9];
+    unsigned char buffer[G15_KEY_READ_LENGTH];
     int ret = 0;
+#ifdef LIBUSB_BLOCKS
+    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, G15_KEY_READ_LENGTH, timeout);
+#else
     pthread_mutex_lock(&libusb_mutex);
-    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, 9, timeout);
+    ret = usb_interrupt_read(keyboard_device, g15_keys_endpoint, (char*)buffer, G15_KEY_READ_LENGTH, timeout);
     pthread_mutex_unlock(&libusb_mutex);
-   
+#endif
-    if (ret == 9)
+    if(ret>0) {
-    {
       if(buffer[0] == 1)
         return G15_ERROR_TRY_AGAIN;    
-    
-        processKeyEvent(pressed_keys, buffer);
-    
-        return G15_NO_ERROR;
     }
+
+    switch(ret) {
+      case 5:
+          processKeyEvent5Byte(pressed_keys, buffer);
+          return G15_NO_ERROR;
+      case 9:
+          processKeyEvent9Byte(pressed_keys, buffer);
+          return G15_NO_ERROR;
+      default:
           return handle_usb_errors("Keyboard Read", ret); /* allow the app to deal with errors */
     }
+}

libg15.h

@@ -14,6 +14,10 @@
     You should have received a copy of the GNU General Public License
     along with g15lcd; if not, write to the Free Software
     Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+    
+    (c) 2006 - 2007 The G15tools Project - g15tools.sf.net
+    
+    $Revision: 292 $ -  $Date: 2008-11-11 08:51:25 -0500 (Tue, 11 Nov 2008) $ $Author: aneurysm9 $
 */
 
 #ifndef _LIBG15_H_
@@ -27,6 +31,9 @@ extern "C"
 #define G15_LCD 1
 #define G15_KEYS 2
 #define G15_DEVICE_IS_SHARED 4
+#define G15_DEVICE_5BYTE_RETURN 8
+
+#define G15_KEY_READ_LENGTH 9
 
 typedef struct libg15_devices_t libg15_devices_t;
 

rpm/libg15.spec

@@ -3,11 +3,11 @@
 %define prefix	/usr
 Summary: library to control logitech G15 keyboards
 Name: libg15
-Version: 1.2.2
+Version: 1.2.7
 Release: 1
 Copyright: GPL
 Group: Applications/System
-Source: http://prdownloads.sourceforge.net/g15tools/libg15-1.2.2.tar.bz2
+Source: http://prdownloads.sourceforge.net/g15tools/libg15-1.2.7.tar.bz2
 URL: http://sourceforge.net/projects/g15tools
 Distribution: Linux
 Vendor: NONE
@@ -20,7 +20,7 @@ Provides: libg15
 %description
 libg15 controls the G15 keyboard, providing applications access
 to the keyboard's LCD display, and the additional keys available
-on this keyboard. Logitech Z-10 speakers and G11 keyboards are also supported.
+on this keyboard.
 
 %package devel
 Summary: libg15 controls the G15 keyboard and LCD.
@@ -32,7 +32,7 @@ Provides: libg15-devel
 %description devel
 libg15 controls the G15 keyboard, providing applications access
 to the keyboard's LCD display, and the additional keys available
-on this keyboard. Logitech Z-10 speakers and G11 keyboards are also supported.
+on this keyboard.
 
 %prep
 %setup