G15STATS
========

A CPU/Memory/Swap/Network/Battery/Temperature/Fan Speed/CPU Frequencies usage meter for G15Daemon.

========
Features
========

* Summary Screen displays 4 or 5 indicators from CPU/Frequency/Memory/NET/Temperature/Fan Speed/Swap, along with current time.
* CPU Screen displays graphs of User/System/Nice and Idle time, along with LoadAVG and Uptime.
* Frequency Screen displays all CPU cores frequency with the total
* Memory Screen displays Memory Total & Free, and graph of Used vs Buffered+Cached Memory.
* Swap Screen displays Used, Free and Total swap space, along with the number of pages currently paged in/out.
* Network Screen displays Total bytes In/Out, history graph, Peak speed.
* Battery Status Screen displays battery charge data for up to three batteries
* Temperature Screen displays temperature status for available sensors
* Fan Speed Screen displays fan current speed for the available sensors

============
Requirements
============

- libgtop

=======
Options
=======

|	``-i id``: Gather statistics from named interface (ie -i eth0).
|	``-d``: Run in background (daemonise).
|	``-nsa``: Scale network graphs against highest speed recorded.  The default is to scale against the highest peak in the current graph
|	``-h``: Show help.
|	``-r seconds``: Set the refresh interval to seconds. The seconds must be between 1 and 300 (ie -r 20).
|	``-u``: Display unicore graphs only on the CPU screen. 
|	``-t id``: Force to monitor temperature sensor id on start (ie -t 1). The id should point to sysfs path */sys/class/hwmon/hwmon<id>/device/temp1_input*. Default the sensor id is auto-detected.
|	``-f id``: Force to monitor fan speed sensor id on start (ie -f 1). The id should point to sysfs path */sys/class/hwmon/hwmon<id>/device/fan1_input*. Default the sensor id is auto-detected.
|	``-df``: Disable monitoring CPUs frequencies.
|	``-ir``: Enable the bottom info bar content rotate cycle over all available sensors.
|	``-vc``: The cpu cores will be calculated every time (for systems with the cpu hotplug).
|	``-gt id``: Show temperature <id> in place of the maximal one on the summary screen with the option -gt <id> (ie -gt 1). The id should point to sysfs path */sys/class/hwmon/hwmon../device/temp<id>_input*.

=====
Usage
=====

Once running, the separate screens can be switched to as follows:

|	``L2``: Previous Screen
|	``L3``: Next Screen
|	``L4``: Alternative Screen (Doesn't work on Swap, Memory and Battery Screen)	
|	``L5``: Bottom Info bar mode